Back Back
Isolation Transformer
Get Price Quote
1 Piece (MOQ)
Solar Powertech Solutions is the manufacturer of Isolation Transformer in Coimbatore. Other Detail: Single Phase and three phase models 415V input-415V output 415V input-200V output Features: Reduces the effect of powerline noises, spikes, surges and transients. It isolates the load power line from the erratic grid power.
Toroidal Transformer Coils
Get Price Quote
Description : Rogowski Technology of Current measurement With its over 20 years of experience in Toroidal Technology Salzer- Engineers have pioneered the design, development and manufacturing of Rogowski coils and we have been supplying the Rogowski Coils to various OEM’s worldwide. A Rogowski coil, named after the German Physisct Walter Rogowski, is an electrical device for measuring alternating current (AC) or high-speed current pulses. It consists of a evenly wound helical coil of wire with the lead from one end returning through the centre of the coil to the other end, so that both terminals are at the same end of the coil. The winding is done on a non-magnetic/non-metal former of constant cross sectional area. The whole assembly is then wrapped around the straight conductor whose current is to be measured. The speciality is there is no metal (iron) core. Features : Rogowski coils have been used for the detection and measurement of electric currents for decades. The voltage output is proportional to the rate of change of current. This voltage is integrated, thus producing an output proportional to the current. Even though Rogowski Coils are low power sensors, the protection system is immune to external electromagnetic fields. Rogowski Coil can replace CTs for protection, metering, and control purposes. Rogowski Coils are accurate, small, light, and easy to install. They do not saturate. Rogowski Coils provide superior differential protection for power transformers, substation bus bars, generators, and large motors. Rogowski Coils do not create hazards for personnel with open secondary, as Conventional current transformers. Specifications : Range : Frame 1- Upto 2000AMPS. Range : Frame 2- Upto 4000AMPS Range : Frame 3- Upto 6400AMPS. Frame 3 is provided with Two Rogowski Application : Sudden short-circuit testing Monitoring arc furnaces Lightning test facility Monitoring weld quality Protection of slip-ring induction motors Electromagnetic launchers On-line insulation discharge monitoring Transient measurements.
Best Deals from Transformers
Oil Cooler
Get Price Quote
We are able to provide the best quality Oil Cooler. This cooler is widely used in oil refineries and related industry for cooling oil. Provided cooler is highly demanded in the market due to its sturdy design, low maintenance and easy installation. Moreover, clients can avail the offered Oil Cooler from us in different technical specifications at affordable prices. Â Â Â Â Â Â Â Â Â Â Â Â Â
Constant Voltage Transformer
Get Price Quote
We make available, Constant Voltage Transformer, which is appreciated for providing adequate power for the critical load. It comes with features like overload protection, instantaneous correction, over voltage & under voltage protection, etc.
Esennar Earthing Transformers
Get Price Quote
We have gained complete customers satisfaction as we make maintain proper schedules for the delivery of the consignments We are a buyer's best bet when it comes to purchasing Esennar Earthing Transformers.. Our company is a promising supplier.
Distribution Transformer
200,000 Per Piece
Isolation Transformer
40,000 Per Box
Control Transformer
Get Price Quote
SRI VAARI ENGINEERING & AGENCIES is offering a wide range of Control Transformers in global markets. Featured with precision, our Control Transformers are designed as per client̢۪s expectations. Features and Benefits : Primary windings are vacuum cast for high dielectric strength and ruggedness. Vacuum cast secondary coils are available in some models.Constructed with high quality grain-oriented core steel and copper conductor.Units are partial discharge tested in accordance with Canadian Standard C9-M1981 (reaffirmed 1997).Standard voltages are 120/240 for single-phase units and 208Y/120 for three phase units with other voltages available. Used in : Transformers are manufactured from 3 VA to 3000 VACNC Machines are used for windingFully Equipped Production and QC Section
Transformer Oil
75 - 300 Per Litre
100 Litre (MOQ)
Isolation Transformers
Get Price Quote
Variable Transformer
Get Price Quote
We arfe offering variable transformer. Variable transformers are used for testing applications where variable output is required from 0 to any voltage. These kind of transformers are widely used in transformer motor generator manufacturing units to perform various electrical tests. the construction of these variable transformers is very simple & consists of buckboost double wound transformer and +- type linear rolling contact regulator for stepless control. Variable transformers are widely available upto 10 mva.
R-Core Transformer
Get Price Quote
High Voltage Transformers
Get Price Quote
We are offering high voltage transformers. the high voltage transformers are designed as light weight with high efficient units by padmavahini transformers private ltd. The high voltage transformers are one of the transformers produced by padmavahini whose secondary voltage is greater than the primary voltage. These transformers are intended for the * field charges * plasma power sources * ion supplies * coil guns * gravity * air purification * hand held rail * ozone these transformers are also intended for some other high voltage applications which require 12 volt input. These high voltage transformers convert voltages from one phase or level configuration to another. High voltage transformers usually depend on the magnetic induction principle that is converting the current or coil levels between the coil.
Potential Voltage Transformers
Get Price Quote
We are into manufacturing of a wide range of Potential Voltage Transformers, which are manufactured using very high quality raw material procured from the renowned vendors of the industry. They are manufactured under the supervision of our expert professionals who ensure that the product is in compliance with industry set quality standards. They are designed by our designers keeping in mind the latest market trends.
two phase transformers
Get Price Quote
rectifier duty transformers
Get Price Quote
We are offering rectifier duty transformers. Which is suitable for diode and thyristor rectifiers to be used for electrolysis processes.
Oil Cooled Motorized Auto Transformers
Get Price Quote
We make available precisely designed Oil Cooled Motorized Auto Transformers in different specifications matching the requirement of different oil-controlled motors. Use of tested components in the fabrication of Oil Cooled Motorized Auto Transformers makes them highly durable and reliable in use. Our Oil Cooled Motorized Auto Transformer does not heat up quickly and has high-end features which make it demanded widely. These Oil Cooled Motorized Auto Transformers are the best option for efficient voltage regulation. Specifications : Good voltage regulationHigh short time surge capacityVery high efficiencyNo waveform distortionRugged and compact constructionContinuous, step less and smooth control of output
Transformer Bushing
1,910 Per Piece
Single Phase Transformer
Get Price Quote
We design and develop a high quality range of Three Phase Transformers for use in three phase power distribution systems to facilitate a step up or a step down of voltages. We have designed the 3 phase transformer to allow three circuit conductors to carry three alternating currents with the one conductor as the reference and the other two circuits that are delayed in time by one and two thirds of the electric current. We provide the 3 phase transformer that varies for each industry throughout to change the values of the three phases current and the voltage. These transformers are enclosed together with the filled dielectric oil. Since it is dielectric oil, it offers electrical insulation between the windings and it also performs several other functions. This also avoids development of moisture. It provides cooling.
Single Phase DC Transformer
4,000 Per Piece
OUTOOR POTENTIAL TRANSFORMER
Get Price Quote
PGR Manufacture both indoor and outdoor current Transformer up to 11 KV voltage level in ring type, window type, bar primary and wound primary of ratio ranging from20/5A to 5000/5A for metering and protection.The rated burden for the current Transformer is 5A 50 30VA of accuracy class ranges from 0.2 to 0.5. The above CT's are designed to accommodate easily in any type of breakers (Cause's) as well as in outdoor substations.
Power Transformers
Get Price Quote
We provide a gamut of Custom-Designed Transformers (50 VA to 150kVA Dry Type Only) which are made available with various specifications. Developed in compliance with various industry standards, our precise gamut is widely used elevators, printing machineries and underground applications. Our transformer is suitable for high end requirements of industries.Following are the unique features of Power Transformers(Custom-Designed Transformers): Excellent voltage regulation High performance Long functional life Compact design  Application Area: SPM's Printing Machineries Elevators (Freight) 50 / 60 Hz, 100 Hz, 400 Hz Systems Test Jigs Mines, Underground applications Coil Replacments For Imported Machineries (Textiles, Machine Tool, Process Equipments etc.)
Isolation Transformer
Get Price Quote
An Isolation Transformer is a device which is use to decouple two circuit, the load to the Isolation Transformer and to the Input supply, Isolation Transformer suppress electrical noise which occurs in transmission line. An Isolation Transformer blocks transmission of DC signal from one circuit to other and allow ac signal to transmit. It also prevent interference cost by ground looping. Isolation Transformers are constructed with two isolated Faraday shields between the primary and secondary windings. Theuse of two shields in the construction of the isolation transformer diverts high frequency noise, which would they occur. The two shields provide more effective isolation of the primary and secondary circuits and also isolation to their grounds.
Electrical Control Transformer
Get Price Quote
Isolation Transformer
Get Price Quote
transformer oil coolers
Get Price Quote
We can design, manufacture and supply a range of Air Blast Transformer Oil Coolers used on large HVDC (High Voltage Direct Current) applications worldwide within the Power Generation, Transmission and Distribution industries. The transformer oil coolers are available for most transformer projects and offer a wide range of capacity variants with different installation arrangements, and we also supplies to Railways for their ACEMU projects. To meet varying operational requirements units can be constructed in a variety of materials, including all aluminium (tubes fins), copper or stainless steel. This takes into account key design parameters such as thermal performance, weight, orientation, corrosion protection for arduous environments.
Control Transformer
500 - 10,000 Per Piece
Isolation Transformers
8,500 Per Piece
Isolation Transformer
Get Price Quote
We are the main supplier of this product.
transformer oil coolers
Get Price Quote
The Gireesh transformer oil coolers are available for most transformer projects and offer a wide range of capacity variants with different installation arrangements, and we offer special corrosion protection when needed due to ambient conditions on site.Gireesh has manufactured and delivered transformer oil coolers to many major global power companies during the last two decades.
Filter by Localities
