Transformers Dealers

(126 products available)
  • Premium
    Resin Cast Current Transformer

    Resin Cast Current Transformer

    780 - 3,300 / piece

    • MOQ3 Piece
    • Country of OriginIndia
    • MaterialMetal
    • PhaseSingle Phase
    • Surface FinishingCoated
    • UsageOutdoor
    • SpecialityEasy To Use, High Efficiency, Reliable
    • These are resin cast transformers used for outdoor application.
    www
  • 3 Phase Outdoor Power Transformer

    3 Phase Outdoor Power Transformer

    Get Price Quote

    3 Phase Outdoor Power Transformers are designed using superior quality raw materials and are quite appreciated for their excellent durability, sturdiness, efficiency and endurance. We are a leading Phase Outdoor Power Transformer manufacturer, exporter and supplier from Nasik, Maharashtra. These transformers have oil level indicator, thermometer pocket, radiators, air release plug, rating and diagram plate, filter valve, HV and LV terminals etc. Compared to others, our product is economically priced.
    ...more
  • Low Tension Current Transformers

    Low Tension Current Transformers

    Get Price Quote

    • System Voltage720V maximum
    • Ambient temperature-25°C to +40°C
    • Current transformers convert an alternating current usually high in to a proportional lower one, depending on their use. Measurement type CTs are required to transform the primary current, at various classes of accuracy, as specified by the class designation, over a current range from 1 to 120 percent of its rated primary ratio. The design of this type of transformer requires the inclusion of a core and winding which will when connected to its rated burden; perform within the limits of error as indicated by the standard’s specification. It is an advantage for a measurement type transformer to saturate above this range, which provides a protection against damage to instruments by limiting the secondary current when surge currents or faults appear in the primary circuit.
    ...more
  • Special Transformer

    Special Transformer

    Get Price Quote

    • ApplicationIndustrial Use
    • Automatic GradeAutomatic
    • Power250-500kw
    • Tensile Strength100-125Mpa
    • FeatureEasy To Install, Electrical Porcelain, Proper Working
    • Temperature CapacityHigh Temperature, Low Temperature, Medium Temperature
    • Primary voltages are typically 15 kV or 25 kV, which are the usual nominal AC voltages of catenary feeders in railways around the whole world. The nominal current is usually between 200A and 800 A. Frequencies in electric railways are 50 Hz, and the power ratings of booster transformers are 100-800 kVA.
    ...more
  • CRGO Cores

    CRGO Cores

    Get Price Quote

    Ours is a quality-driven organization that is engaged in offering only high-quality products. Thus, we use superior grade raw materials for the fabrication of our entire range. Our complete range of product is wrapped in strong, nontoxic, and superior-grade packs that protect the contents inside from damage, moisture, logistic movement, etc. Furthermore, the packaging has product details printed on it.
    ...more
  • Current Transformer

    Current Transformer

    Get Price Quote

    Current Transformer Current transformer are designed to scale down replica of the current in the MV lines and isolate the measuring instruments meters ,relays etc, from the power circuit .We provide : A- Indoor CT with Epoxy insulation up to 33KV Burden and accuracy class as per IS Standard. Is=5 or 1A Ith Upto 50KA     B-Oil cooled CT up to 33KV Burden and accuracy class as per IS Standard. Is =5 or 1 A. Ith Upto 50KA
    ...more
  • Premium
    Transformer Core Clamp +1

    Transformer Core Clamp

    25,000 - 50,000 / Piece

    • MOQ500 Piece
    • Country of OriginMade In India
    • Product TypeTransformer Part
    • MaterialMild Steel
    • UsageCore Clamp For Dry Transformer
    • SizeCustomizable
    • ProtectionKVA Rating
    • ColorAs per Requirement
    • CompatibleCompatible for all products - As per design
    • We are a leading Manufacturer and Supplier of Transformer Core Clamps, proudly Made In India. Our Transformer Core Clamps are essential Transformer Parts made from high-quality Mild Steel. Customizable in size, these Core Clamps provide reliable protection for Dry Transformers with varying KVA ratings. Trust our Indian-made Transformer Core Clamps for superior quality and performance in the electrical industry.
    ...more
    www
  • Indoor Air-Cooled Resin Cast Voltage Transformer

    Indoor Air-Cooled Resin Cast Voltage Transformer

    Get Price Quote

    • Rated VoltageUp To 33kV
    • Frequency50Hz
    • Accuracy ClassAs Per Standard
    • Primary Voltage (Vp)Up To 33000V
    • Secondary Voltage (Vs)110V
    • BurdenAs Per Standard
    • Lightning Impulse VoltageUp To 170kV
    • Indoor VT for system voltage up to 33 kV Single or Double pole VT, Construction available in resin cast & oil cooled type.
  • PCB Mounting Transformers

    PCB Mounting Transformers

    Get Price Quote

    • ConditionNew
    • Number Of FlowerPCB MOUNTING TRANSFORMERS
  • Power Transformer

    Power Transformer

    Get Price Quote

    With our excellence in this field, we share forefront for supplying world-class array of products from Nashik(India). Reckoned for our excellent customer care support, we have become preeminent suppliers of Power Transformers in the industry.   Range : Autotransformers Generator Step-up Transformers Small Power Transformers Medium Power Transformers Large Power Transformers Regulating Power Transformers System / Two Winding Transformers Phase-shifting Transformers Mobile Transformers Shunt Reactors
    ...more
  • Transformer Oil Coolers

    Transformer Oil Coolers

    Get Price Quote

    • Power RatingUp to 3000 kW/Each
    • Cooler ConstructionFixed tube plate, Floating tube plate
    • Tube sheetC-Steel, Naval brass, Stainless steel 304/316, Copper Nickel (70:30), Copper-Nickel (90:10), Titaniu
    • The main source of heat generation in transformer is its Copper Loss Or I2r Loss. Although there are other factors contribute heat in transformer such as hysteresis & eddy current losses but contribution of I2R loss dominate them. If this heat is not dissipated properly, the temperature of the transformer will rise continually which may cause damages in paper insulation and liquid insulation medium of transformer to avoid this THERMO Group offers following range of cooling solutions based on the customer requirements. This system uses water as cooling medium. In this system both the fluids namely Cold And Hot are pumped into the heat exchanger hence the name. This is the most efficient cooling system for transformers. Thermo Group offers wide range of OFWF heat exchangers with best in class performance and quality which are completely designed as per customer requirements or as per standards.
    ...more
  • Potential Transformers

    Potential Transformers

    200,000 / Piece

    • MaterialCopper
    • Driven TypeElectric
    • We provide high-quality potential transformers (PTs) from approved MSEDCL vendors, ensuring compliance with local regulations. Our PTs are designed for accurate and reliable measurement of voltage in electrical systems. Additionally, we offer PT testing services to ensure compliance with MSEDCL standards and maintain the accuracy of your metering equipment.  Types of Potential Transformer Outdoor Type PTs Indoor Type PTs
    ...more
  • OIP Insulated Outdoor Instrument Transformers

    OIP Insulated Outdoor Instrument Transformers

    Get Price Quote

    • Voltage Ratio11 kV
    • Current Transformer   Gemini’s range of OIP Insulated Instrument Transformers use Oil Impregnated Paper  Insulation and are designed for serving in Outdoor applications,  with several unique features with one aim – TOTAL RELIABILITY. Our present range of OIP Current Transformers  include CTs from 12 kV to 145 kV as per International Standards (IEC).     Design     Gemini’s OIP insulated outdoor products are subjected to extreme climatic conditions at Customer Sites and hence Quality and Reliability have been built into the Product, right from the design stage and are followed up through established manufacturing processes, rigorous In-process Quality checks and the designs validated by exhaustive type testing and satisfactory field performance.   Gemini’s design philosophy aims at the following  aspects :   True Hermetic Sealing ensures that the OIP Insulation retains the original properties even after several years of field operations; Our products are well engineered, our processes are well established. These factors ensure high reliability of our products whilst in service. Our products are truly maintenance-free; hence, only periodical cleaning of the products is required. Our products are designed to be user-friendly - right from unpacking, handling, erection, testing, commissioning and day to day operations in the field.  Safety has been built into our products.  Even in the unlikely event of an internal failure, the Instrument Transformer DOES NOT SHATTER or explode. A corrugated Stainless Steel Diaphragm has been provided, which, besides lending compensating volume for oil expansions during normal operations, acts as a proven pressure relief device, by peeling off from the tank from the weld    and  thus  averts any explosion of the porcelain insulator.
    ...more
  • High Voltage Current Transformer

    High Voltage Current Transformer

    90,000 / Piece

    • Core TypeRing Core Type CT
    • MaterialCast Iron
    • PhaseThree Phase
    • Accuracy Class0.5
    • Rated secondary current5A or 1A
    • Rated output capacity5-60VA
    ...more
  • SMPS Transformers

    SMPS Transformers

    Get Price Quote

    We are Supplier of a comprehensive range of SMPS Transformers that are widely used in various electronic items such as computer monitors, DVD players, TVs, VCRs and refrigerators. These SMPS Transformers are available in different power capacities to suit the diverse requirements of the clients. In order to deal with specific demands of diverse customers, we provide SMPS Transformers in desired specifications.
    ...more
  • Transformer Stampings

    Transformer Stampings

    Get Price Quote

    transformer stampings Our firm is consistently engaged in offering Transformer Tank Fabrication to our valuable commercial customers. These tanks facilitate the needs of all electrical industries and related sector. Our fabrication unit is well managed by skilled professionals by using damage resistant material and followed by proper guidance. Accurate in size and shape our Transformer Tank Fabrication gadgets are available in different specifications.
    ...more
  • DC Transformer

    DC Transformer

    Get Price Quote

    Welding control units with welding current direct reading. Six-phase silicon rectifier with device to check the diodes proper clamping. Protection of the diodes against excess voltages, and temperature. Synchronous SCR contactor insulated from the cooling water circuit with protection thermostat. Standard on all models: two-hand safety control with timer assuring the best safety, and removable key selector. The two-hand control push-buttons are standard on projection welders only (they are available on request on spot welders). Two-stage electric foot control for clamping and welding pieces only if correctly positioned. Pre-connected for additional double stage electric foot control for the direct recalling of welding program No.2 (not on units equipped with rotary selector recall). Emergency push-button to stop the machine immediately. Protection with automatic circuit breaker. Water-cooled transformer, plates, electrode-holders and electrodes; transformer with epoxy resin coated windings.
    ...more
  • Transformer Bobbins

    Transformer Bobbins

    Get Price Quote

    We manufacture wide range of CRNGO & CRGO E & I transformer lamination and customized electrical stampings, which are fabricated with progressive tools& with the help of quality presses, using premium quality raw material. The utmost care is taken in raw material procurement & manufacturing process to attain electrical as well as dimensional properties. Due to having in house tools manufacturing facility we can develop the critical stampings which are required in various special applications also.
    ...more
  • 220 KV Double Break Disconnector

    220 KV Double Break Disconnector

    390,000 / Set

    • Country of Origin220 kV
    • MaterialMild Steel
    • Brand NameTritech
    • Current1600A
    • Surface FinishPowder Coated
    • Automation GradeManual
    ...more
  • Isolation Transformer

    Isolation Transformer

    Get Price Quote

    The Transformer which has no direct current path between its primary winding and secondary winding is called an Isolation Transformer. We get 3 Phase + Neutral Supply from MSEB. Normally, the neutral which we get from MSEB is very poor and neutral to earth Voltage gets increased as load increases. By using an Isolation Transformer with delta input and star output we can eliminate the need of neutral from MSEB. The Isolation Transformer that we provide is of compact size and reduced weight. It has ample ability to withstand short circuit currents. Advantages of aluminum foil wound transformer against copper wound transformer Compact size and reduced weightIncreased thermal stability and higher short-term over load capacityHigher surge withstanding capabilityEnhanced ability to withstand short circuit currentsReduced impact of harmonics and high frequency on the design of TransformersGreater insulation reliabilityLower CostNeutral Failure Problem eliminated ( Delta-Star Construction)High Insulation resistanceReduction of Noise
    ...more
  • Substation Equipment

    Substation Equipment

    Get Price Quote

    • FeatureWe offer high quality 11 / 22 / 33 / KV, CSS with customised variations.
    • The compact substation is designed, keeping in mind the personnel safety, considering H.T. equipment located in populated areas. It is designed in accordance with IEC-61330 standards. It is pre-fabricated secondary sub station containing, distribution transformer, medium voltage switch gear, low voltage switch board, connections and associated equipments in a compact unit. The doors are screwed with double point closing device with flush mounted handles for padloadings and the complete unit is designed for outdoor indoor type as per customers specific requirement. all components are housed an enclosure, which protects the equipment from environment hazards and unauthorised access. The electrical equipment is cooled by natural ventilation through openings in the sub station.
    ...more
  • Isolation Transformer

    Isolation Transformer

    Get Price Quote

    IThe Transformer which have no direct current path between it's primary winding & secondary winding is called as Isolation Transformer. We get 3 Phase + Neutral Supply from MSEB. Normally, the neutral which we get from MSEB is very poor and neutral to earth Voltage get increased as load increase. By using an Isolation Transformer with delta input and star output we can eliminate the need of neutral form MSEB.   ADVANTAGES OF ALLUMINIUM FOIL WOUND TRANSFORMER AGAINST COPPER WOUND TRANSFORMER Compact size and reduced weight.   Increased thermal stability and higher short-term over load capacity.   Higher surge withstanding capability.   Enhanced ability to withstand short circuit currents.   Reduced impact of harmonics and high frequency on the design of Transformers.   Greater insulation reliability.   Lower Cost.   Neutral Failure Problem eliminated ( Delta-Star Construction)   High Insulation resistance.Reduction of Noise.
    ...more
  • Ring Current Transformer

    Ring Current Transformer

    500 - 5,000 / Piece

    • MaterialCopper
    • Rated Power11KV OR 33KV
    • Core TypeRing Core Type CT
    • ApplicationIndustrial
    • Accuracy Class0.2
    ...more
  • Transformer Coil

    Transformer Coil

    26 / Piece

    • MOQ500 Piece
    • MaterialCopper
    • Type Of Power SourceDC
    • Usage/Applicationelectric applicance
  • Liquid Filled Transformers

    Liquid Filled Transformers

    Get Price Quote

    We would like to inform you that we are iso:9001-2015 certified company serving pan-india & world-wide, based in nasik-maharashtra. Recently, we have started exports also. The unit is engaged in manufacturing liquid filled power & transformers up to 10 mva-33kv class for the past 30 odd years. These transformers can be supplied with regular mineral oil filled or with non-flammable k-3 class insulating fluids. Transformers manufactured at fairdeal are tailor-made to suit your requirement, and can be designed for any rating, voltage ratios, application etc. Or even configuring it to meet restricted spaces. We can supply you stand-alone transformers with or without on-load tap-changers, with bus-coupled vcb for 11kv eliminating the need of cable between vcb & transformer as well as reducing the overall footprint. Transformers are supplied meeting the latest iec:60076 is 2026 & is:1180-2014 (for transformers upto 2.5 mva). We assure you of a flawless product built to international standards, excellent support (technical as well as after-sales), within or beyond guarantee period. Finally, we humbly request you to forward your requirement of transformers for your new existing expansion project, to enable us to send our detailed quotation, and an opportunity to serve you.
    ...more
  • Low Tension Current Transformers

    Low Tension Current Transformers

    Get Price Quote

    It is not possible to use line current directly for measurement and relaying purpose due to its high value and insulation problem. CURRENT TRANSFORMER which is widely known as 'CT' is a piece of electrical equipment which converts line current ( primary current ) in to small standard current values which are suitable for the devices to which it is connected e.g. measuring instruments, meters, protection relays.
    ...more
  • 3 Phase Current Transformer

    3 Phase Current Transformer

    Get Price Quote

    • PhaseThree Phase
    • Country of OriginMade in India
    • Voltage Rating720V maximum
    • BrandRishabh
    • StandardsIEC-61869-1&2 / IEC-60044-1, BS3938, BS7626, IS-2705-1,2&3
    ...more
  • Auto Transformer

    Auto Transformer

    2,000 / Piece

    • Country of OriginMade in India
    • Brand NameSuvidhi
    • PhaseSingle Phase
    • Mounting TypePortable or Flush Mounting
    • Country of Origin220V
    • UsageEducational Training Kit & Industrial Purpose
    • Current1Amp to 40 Amp
    • ApplicationsIndustry
    ...more
  • Utility Substation Equipment

    Utility Substation Equipment

    Get Price Quote

    The Motwane IT-51 is a microprocessor based Digital Insulation tester designed for testing of all types electrical installation like transformers, switchgear, motors, generators and utility substation equipment’s. The instrument automatically performs Polarization index by selecting PI mode. IT-51 has a large LCD blue backlit display, it shows leakage current in scrolling form along with IR value and PI value. It is rechargeable battery operated and AC mains provision for battery charging. FEATURES Selectable test voltage 250V, 500V, 1000V, 2500V, 5000V. Insulation Resistance measurement up to 1TΩ Short circuit current ≤ 1.4mA Mains & battery operation Polarization Index measurement facility AC/DC voltage measurement up to 600V. Two Programmable timer from 0 Sec to 99 minutes. Liquid Crystal Display with pleasant white backlight. Internal rechargeable Battery. Guard terminal to minimize the surface leakage Safety - IP 54, CAT IV 600V and CE conformity SUPPLIED Standard Accessories 3 x 3m Test lead with large alligator clip Mains Cord Instruction Manual Calibration Certificate Carry Case Optional Accessories 3 x 10m Test lead with large alligator clip
    ...more
  • Rubber Air Cell

    Rubber Air Cell

    Get Price Quote

    • FeaturesSuperior quality products ,Industry leading prices
    • MaterialNatural Rubber, Nitrile Rubber, Neoprene Rubber, Silicone Rubber, Viton Rubber
    • Size2L, 8L, 19L, 24L, 50L, 100L
Filter by Locality
top