Gasifier Dealers

In Downdraft Gasifier System, the controlled intake of air (oxygen) is fed into the chamber containing downward movement of biomass material. After going through the process, the producer (inflammable) fuel gas is finally collected and drawn off at the bottom of this Gasifier. It is an efficient technique which has the capacity to process the biomass containing the moderate moisture (up to 30%). About 5 to 10 minutes time is needed to ignite the combustion and bring the plant to an operative temperature. Downdraft Gasifier is best suitable for the applications where the temperature control is critical, and the cleaner fuel gas is required. These Gasifiers can be used in those applications where moderate temperature is required up to 1100oC.

Gasifier structure: wholly water-jacketed structure, self-produced steam with a pressure of 49 Kpa can be used as gasifying agent and steam seal for probing fire. Feeding mechanism: bucket hoisting and manual double bell jar feeding mechanism is adopted which is easy to operate and can prevent gas leakage efficiently. Slag discharge mechanism: wet slag discharge is made from both sides with ratchet wheel and detent of hydraulic drive. This gasifier has advanges of easy operation, steady production, convenient adjustment and reliable running. 

Our company’s name figures in the list of trusted Manufacturers, Suppliers and Exporters of Industrial Gasifier from Uttar Pradesh, India. The Industrial Gasifiers we make available are manufactured in conformity with international quality standards and norms. Rigorous quality-tests ensure that only flawless Industrial Gasifiers reach the buyers. Bulk orders of the Industrial Gasifiers are processed by us as per the specific requirements of buyers.

  GASIFICATION SYSTEM- Multi-Fuel, non-conventional,Co-Generation, Renewable Green energy source, receiving backing from the Governments of various countries all over the World.  Municipal Solid Waste (viz.- Paper waste, Plastic, Polythene, Rubber, Tires, Leather, Thermocol), Biomass (viz.- Wood chips, Saw dust, Rice Husk, Corn Cobs, Sugar Cane Bagasse, Coconut Shells), Coal. Max.Output of a single Unit with single Generating set - 04 Mega Watts. For higher requirements multiple Units can be commissioned larger unit can be made but Gasifier above 4 MW are larger in size for transportation.        GASIFICATION Output of a Single Unit- Up to 4 Mega Watts, the largest, single transportable unit in the World, innovated & developed by us. For higher requirements multiple Units can be commissioned.                                                                  Gasification is a thermo-chemical process of cracking that converts solid waste, Biomass or coal to a gaseous fuel called “Producer Gas”. This producer gas is fuel for many different applications of shaft power or electricity in the equipment like, Internal Combustion Engines.  For thermal power in-  furnaces, kilns, dryers, Rolling mills and Heat treatment equipment. The equipment to be utilized is the new generation Fluidised Circulating Bed Updraft with direct & indirect oxidation Technology Gasification System developed by consistent R&D at Bijendra to obtain clean, rich and consistent supply of Producer Gas which has calorific values close to1400K.Cal/NM3, with higher gasification efficiency and low fuel consumption.  At high gasification temp. of 11oo◦ C, Carbon combines with Steam & CO2 to form CO, CH4, H2 & increases the Calorific Value of Gas & also the overall efficiency of gasification. Steam is co-generated in the Steam Jacket & injected with the air into the Reactor,   which dissociates at high temp. & forms more of CO & H2, resulting in further increase of the calorific value of the Gas. It is then subjected to washing & cooling by multiple shower washers & passed through the specially designed Tar, Sulphur & Dust separators & demoisturizer to be ultra clean for injecting directly into the I.C. Engines modified by us for Syn-Gas /Producer Gas mode of operation. We have Modified HFO based Engine to largest Producer Gas/Syn-Gas based Engine of 4 MW in the World. For higher capacities, multiple units in parallel would be used.   There are No Effluents & no environmental Gas emissions in the process apart from the Emission of Flue Gases & that also well under the Pollution control norms from the Exhaust pipe of the Generating set. The exhaust emissions of the Engine, can be used for a Waste Heat Recovery Boiler & close to 1000 Kg Steam at 7 Bar. pressure per MW per hr. can be obtained & also it can be put to use for other thermal applications.

Most biomass materials like Wood , Charcoal , Rice Husk etc can be converted into a gaseous fuel known as producer gas, which comprises carbon monoxide, hydrogen, carbon dioxide, methane, and nitrogen. This gas has a lower calorific value (1000–1200 kcalnm3) compared to natural gas or liquefied petroleum gas, but can be burnt directly with high efficiency and good degree of control without emitting smoke. The producer gas flame temperature can be as high as 1100 oC. Each kilogram of air-dry biomass (10% moisture content) yields about 2.5 nm3 of producer gas. In energy terms, the conversion efficiency of the biomass gasifier process is in the range of 80%–90%.

We offer coal gasifier. Case coal gasifier works on the principle of partial combustion of coal thus producing primarily carbon mono oxide called producer gas. We guarantee for optimum design, manufacturing and performance. We have successfully installed over 200 gasifiers in steel industry. The application being majorly for reheating furnaces for rolling mills. We have successfully replaced fuels previously used like furnace oil, pulverised coal, direct fed coal, propane etc.

Biomass gasification is a process of converting solid biomass fuel into a gaseous combustible gas (called producer gas) through a sequence of thermo-chemical reactions. The gas is a low-heating value fuel, with a calorific value between 1000- 1200 kcal/Nm3 (kilo calorie per normal cubic metre).

Biomass gasifier Biomass materials are used since millennia for meeting myriad human needs including energy. Main sources of biomass energy are trees, crops and animal waste. Among the biomass energy sources, wood fuels are the most prominent. Presently, the biomass sources contribute 14% of global energy and 38% of energy in developing countries. Biomass gasification has some better advantages over other alternative energy sources. The technology's conversion efficiency is high. It can be applied over a wide range of output metrics with only a small variation in overall efficiency and investment.

Fixed bed updraft gasifier when supported with cyclone separator, wet scrubbers, bag filters, electrostatic precipitator etc. can deliver clean producer gas which can be used to fire I C Engines which in turn can generate electric power when coupled with generator.

Damodar is associated with 'Ankur' Scientific Energy Technologies for marketing, installation and after sales services of Biomass Gasifier. Damodar also undertakes long term O&M contracts for these plants. Till date Damodar has installed more than 90 Gasifiers across the country.

Cooking gasifier is an alternate for diesel bhatty and lpg cooking. Convenient and occupy little space. Can replace lpg upto 4 kgshr or diesel upto 5 ltrshr. Save fuel cost by 50% compared to diesellpg.

We are manufacturing biomass gasifiers for power generation as well as for thermal applications. We are manufacturing these gasifiers for 20kwe to 1200 kwe capacity. We are manufacturing these gasifiers under joint venture with teri and have supplied our gasifiers to canada, usa, romania, thailand and finland

We are reckoned as a prominent coal gasifier exporter in india. The coal gasifier, offered by us, is high in performance and thus highly demanded amidst the global customers. Our coal gasifier is designed as per the set industrial standards. Our coal gasifier is available at the most competitive prices. known for efficiencylonger working lifenew technologylower maintenance