Process Indicator Dealers

 Input (RTD, Volts, mA)• Fail-safe Design protecting the process in case of system malfunctioning• Bright Red seven segment LED Display• Display brightness control• Status Indication LEDs• Relay Output (optional)• Retransmission output (optional)• RS485 Modbus Communication (optional)• Transmitter Power Supply• Relay/ retransmission output mapping with respect to input

This is a versatile and compact high speed Digital indicator indigenously developed for a variety of Load / Pressure sensing applications. It can work as a PLC front-end with analog retransmission output. It can also be used for Single component filling, Hopper / Tank level control, High speed load testing , etc. RS485 serial communication is provided for interface to other instruments. It is housed in a 96mm X 48 mm DIN Panel mount enclosure and operates using 230 V AC SMPS based power supply.

Electronet Series DPC-100 is Universal Input Process Indicator / Controller specially designed for various industrial applications.These can be used for monitoring and controlling parameters like Temperature, Humidity, Pressure, Flow,speed, Level etc. The measuring range and control points are settable through the keypad on front fascia and control output is available at the rear terminals. Retransmission output and communication port are additive features of DPC-100.

Universal or Fixed Input RTD, Thermocouple, Current & Voltage Front Key Calibration Red or Green Display Color Engineering Unit Labels Insertion Control Action - ON/OFF Control Action - ON/OFF The design of Universal Process Controller is characterized by high reliability and precision, electrical noise and EMI immunity. These features make them ideal for industrial applications in Instrumentation and Process Control. They accept fixed or universal input that can be mA DC, Volts DC, mV DC, thermocouples, RTD or pulse input. The controllers are projected on modularity and flexibility concepts, having single or dual relay output. It can be used for ON/OFF control application where the control action is reverse for heating and direct for cooling. The controller is calibrated for all the basic input and the calibration is not required to be changed if the input type is changed. However if re calibration is required due to any error then calibration can be done through keyboard.

ABUSTEK  make  Indicators  UI   The ABUS UI series of universal process indicator is a high performance indicator that can be used to monitor wide range of input signal. The various input signals could easily be selected from the front keypad without any change in Hardware. The Standard model comes with 2-alarms, 24V auxiliary power supply for transmitter and analogue retransmission 4 ~ 20 mA DC output. The unit features double display for indication of process value and programming data. The large and bright PV display, robustness of product makes the product suitable for industrial applications. The retransmission output could be taken to PLC, recorder and other applications, for other functions. RS- 485 or RS-232 communication is also optionally available.

Process indicating systems for institutes, industries ,mapping , heat treatment furnace , oven, cooling chamber , molding , packing machine , ac , refrigerator , clean room environment , online pressure , humidity etc … 7 segment led 0.5 “, optional 1” display.

The Selec PIC101 Process Indicators / Multifunction indicator suitable for process values indications and alarms in operation of equipment, machinery, systems or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors, or from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal(Scalable). Selectable temperature unit: °C / °F. Versions are available with relay and analogue outputs which can be configured. The process indicator are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270V AC.   Features Input: J, K, T, R, S RTD: PT100 Linear mV: -5 to 56 mV Current: 0 / 4 to 20 mA Voltage: 0 to 10V DC 24V DC sensor supply Selectable temperature unit - °C / °F 85 to 270V AC/DC supply voltage

Libratherm has contributed its 25 years of experience by designing these versatile series of microcontroller based TemperatureProcess Indicators and controllers for general purpose Industrial usage. These are developed and manufactured to suit varied industrial temperature and process indication and control applications where precise indicating and controlling accuracy. The Indicator series DPI-912 and DPI-902 offers Universal or fixed input of J, K or any other thermocouple, RTD(Pt-100) and 4-20mA linear signal. For temperature measurement 1oC0.1oC Indicating accuracy is guaranteed using software linearization algorithm and with linearized retransmission output. Please see details specification sheet as given below.

Canopus Instruments is one of the top manufacturers and suppliers of process controllers. The instrumentation and process control that Canopus manufactures are of top quality. Canopus Instruments is a leading manufacturer of process control products in India. We provide a wide range with top quality in process controller, process indicators. Being the best process control equipment manufacturers we strive to derive customer satisfaction. We provide the best quality of products which are well known for its effective functioning. Get in touch with us to know the details of the products.

We are offering process indicator. 3 ½ digit process indicator 4-20ma, 0-10v dc. features: crisp, bright,flicker-free led display pre-calibrated meters latest lsi ic technology auto polarity and auto zero compact design robust terminals solid-state circuitry international styling specification: aux options a. 240vac (+/-20%) b. 85-265 ac/dc accuracy class 0.5 display 3 ½ / 4 digits 0.56" height red dimensions 96x48 cutout 92x44 96x96 cutout 92x92 mounting panel door

CPL100 instruments measure and display process parameters like level, Pressure, Temperature, Flow, Vibration, Humidity, Wind Speed and more. CPL100 has Real Time Clock and internal EEPROM which Stores the level and volume to External EEPROM at time intervals specified by the user. Saves a maximum of 10000 records (Level , Volume ,Time and Date of Event occurrence). CPL100 has RS-232 Output for GSM connectivity which is compatible for SIM300 GSM Communication to central monitoring station through GPRS, Data Call, short Message Service. Here User can program 10 phone numbers to which data will be sent through SMS also User can demand the controller for the present values whenever necessary by sending a SMS to the controller for which the controller in turn replies with the values These instruments accept a voltage or current input and convert them to the programmed process variable. These instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms, and for controlling pumps. These instruments are panel mount instruments Optional features includes: Upto 2 relays can be programmed using 4 setpoints and current output of 4-20mA.