Commercial Air Conditioner Dealers in Rajkot

The 6375DBID Automatic Intake Dual Combination aluminum louver combines a drainable blade louver and an intake backdraft damper in a nominal 9" frame depth.  Louver blades are .081" thick extruded aluminum at approximately 4" c-c spacing.  Backdraft blades are .025" thick formed aluminum with concealed blade linkage, synthetic bearings and non-metallic blade seals.  It features: Approximately 40% Free Area All aluminum construction for low maintenance and high resistance to corrosion Operable blades that begin to open at approximately .03" w.g. pressure and are fully open at approximately .10" w.g. pressure Maximum recommended intake free area velocity through louver: 550 fpm (168 m/min)

We offer Single Skin Air Handling Units. THE SECTIONISED CONSTRUCTED AIR HANDLING UNITs OF DIFF. SIZEs CONSISTS OF FAN SECTION, COIL SECTION, FILTER SECTION, DAMPER SECTION AND MADE OUT OF HEAVY GAUGE CRCAGI SHEETS (PROPERLY REINFORCED WITH 'C' TYPE CHANNELS ) DULY COATED WITH METAL PRIMER AND SYNTHETIC ENAMEL PAINT. FAN SECTION IS HAVING 1,2 OR 3 MULTIVANE, FORWARD CURVED, CENTRIFUGAL BLOWERS MOUNTED ON TABULAR SHAFT WHICH RUNS IN BALL BEARING SEALED IN RUBBER STEEL PILLO BLOCK, LOCATED OUT SIDE OF UNIT FOR EASY MAINTENANCE. THE WHOLE ASSEMBLY IS STATICALLY AND DYNAMIC BALANCED FOR SILENT & VIBRATION FREE PERFORMANCE. THE CONDENSATE OF COOLING COILs IS DRAINED THROUGH BOTTOM OF FAN SECTION ( CONDENSATE PAN ) VIA 2" COUPLING PROVIDED ON BOTH SIDEs. THE SANDWICHED INSULATED TRAY CAN BE SUPPLIED. COIL SECTION IS HAVING SUFFICIENT SPACE TO ACCOMMODATE HEATING COOLING COILs, HAVING ALUMINUM FINs HYDRAULICALLY RIGIDLY BOUNDED ON COPPER TUBEs FOR BETTER HEAT TRANSFER. DAMPER SECTION IS HAVING OPPOSED BLADE FACE AND BY-PASS DAMPERs TO FACILITATE THE FINER VOLUME CONTROL BY CONNECTING LINKAGE, LOCATED OUT SIDE OF THE UNIT FOR EASY OPERATION. FILTER SECTION IS HAVING 50MM THICK METALLIC FILTER( THREEFIVE LAYERS OF CORRUGATED G.I. WIRENETTING AND TWO OUTSIDE LAYERS HOUSED IN G.I. FRAMES) HDP FILTERs ALSO AVAILABLE.

FEATURES AND BENEFITS 　 　 To control various temperature (-20 centigrade- +40 centigrade) accurately during industrial production 　 The series chiller have manufacturing experience for about twenty years, Install an usage simple, support in brief. 　 Components are from world known manufacturers to make use stable performance and exactitude, stabilization, long service life. 　 According the requirement, in the same unit, there are more than two independent refrigeration loops. 　 Perfect Protection Device (Time Delay, Water Scarcity Protection, the water flow protection, the control and display of high and low pressure, Temperature Control and Display, phase protection, Overload Protection, Frostbite Prevention, Automatic complement water.) 　 Evaporator: can choose stainless steel tank type or shell pipe type or shell and tube type. 　 Water-cooled condenser: choose shell pipe or shell and tube. 　 Air-cooled condenser: adopt special heating panels, Bear corrosion, which have a long using life. The effect is constant from beginning to end. 　 Refrigerant: R-22 　 We make chiller according costomers requirnments.

With our aim to satisfy our clients, we are engaged in manufacturing and supplying an exquisite range of Curd Incubation Rooms. All these products are well equipped and are compact in design. Large infrastructure and healthy environment is provided while fabricating these products. These products are well known for their attributes like high tensile strength, durability and reliability.Curd Room Hot to cold .

Riverflex PVC Duct hose is best for collection & conveyinh of air Gases, Dust and light materials. Used for conduits of air, industrial ventilation, collecting dust with exhaust fans in stone masoning, fiberglass, textiles, asbestos processing and other industries, cooling of motors and air intakes for all machineries, conveying warm air for drying, vacuum cleaning equipmens, air-conditions for offices, and kitchen-range overhead exhaust, etc. Available size 20mm to 200mm Color- Grey - As per Customer demand.  

We are present very strongly in the market with our Compact Product called Online and Offline Chilling Plant. These are the standard size chilling plants will give instant chilling through PHE Plate.  Also we offerd in various size as per Client requirement. We use Refrigerants R-22, 134a, 404a, 407c, 410 Eco Friendly.  Features:  User friendly Compact in design  Corrosion Resistant  Low maintainance  Applications:  Dairy Industry (Milk chilling)  Mineral Water Industry  Food & Beverages Processing Industry  Plastic Industry  Paper & Cement Processing Industry

  HV (High Volume) HEPA filters can be used for upto 4000m3/hr. These filters are developed for demanding final filter applications. The wetlaid microglass fibre filter media is pleated and separated using hot melt beads and housed in a robust filter frame.

Vikrant Comp Tech System is reputed for the high quality and cost effective Water Cooled Chilling Plants. We have an expertise in manufacturing customised cooling plants which meet the requirements of the clients to the minutest details. All the major components of the Water Cooled Chilling Plants are procured from reputed & well known OEMs and we can assure you of their authenticity and durability. The high quality of our product has gained a huge number of valuable clients and we always put in dedicated effort to make this relation stronger. Main Features Fully automatic Water / Air CooledOpen / Hermetic Compressor (Optional)Wide range of Capacity from 3 TR to 300 TRCompressor, Motor, Extension Valve, HP / LP switches, Temperature controller, Electrical Control, Dryer, etc. are of best quality possible and very reliable in all conditions. Uses Highly effective in cooling waterHygienic

CHILLERS to be adjusted during the chiller start-up, load-flow, and shutdown procedures are Listed ; they have the following features: The chilled-water pump (CHWP) is a constant speed pump. It starts or stops immediately once it received an on or off command. The CHWP is usually the first component to start in the chiller and the last component to stop.

Excellent optical dispersion and high transmittance, it can get more brightness based on the same light source, making the light diffusion get the best condition and reduce light source energy consumption effectively. The color temperature is stable and color rendering index does not fall it, can totally keep the natural color LED Heat-resistance, impact resistant, dimension stability, good flatness Easy cutting process, it can be bend and thermoforming, trouble-free fabrication Three kinds of material: Polystyrene (PS), Acrylic(PMMA), Polycarbonate(PC) Various shapes, e.g. round, square, rectangle and etc.; also custom

Our company is recognized as an excellent manufacturer and supplier of pre carbon filters. Pressurized water enters the centre of the housing and passes into a drum rotor free to spin on a bearing and seal. The rotor has two jet nozzles arranged to direct a stream of oil at the inner housing to rotate the drum. Water then slides to the bottom of the housing wall, leaving particulate contaminants stuck to the housing walls.