Engine Components Dealers

(778 products available)
  • Premium
    Lister SR Cylinder Barrel

    Lister SR Cylinder Barrel

    42 / Piece

    • MOQ100 Piece
    • MaterialMetal
    • Thickness5-10mm
    • Country of OriginIndia
    • Weight7.00 kg
    • Dimensions29 × 29 × 24 cm
    • Brand NameDev
    • Description: We are pleased to offer a quality cast new replacement Cylinder Bock. Please select the correct quantity for your engine. Piston Assembly Pt No DEV 570-10940 is not included in the offer. Widely used as Stationary, Marine and Industrial engines of single or Multi Cylinder SR1, SR2, SR3 and SR4 Air Cooled Engine. Lister SR Cylinder Barrel PN 201-50632. Cylinder Bock suitable for SR Engine standard Bore 88.90 mm or 3.500″ or  3 1/2 inch.
    ...more
    www
  • Premium
    Sintered Lock Cams

    Sintered Lock Cams

    6 / Piece

    • MOQ2000 Piece(s)
    • Number Of FlowerStructural Spare Parts
    • Brand NamePSP
    • MaterialSintered Iron
    • UsageCam for Cylindrical Lock
    • Surface TreatmentSteam Treatment Process
    • CommodityHardware Lock Spare Parts
    • FinishSurface Coated
    • company certificateISO9001:2015
    • Precision Sintered Products (PSP) as one of the leading Indian Manufacturer & Exporter of Sintered Self Lubricating Bush & Powder Metal Structural Part such as Sintered Bush, Sintered Bearing, Sintered Metal Bearing, Sintered Metal Bush, Sintered Self Lubricating Bushing, Oilite bearings, Sintered Self Lubricating Bearing, Powder Metal Part, Powdered Metal Part, Sintered Iron Bush, Sintered Bronze Bush, Sintered Gear, Powder Metal Pinion, Sintered Sprocket, Sintered Gerotor, Sintered oil impregnated bush, Sintered oil impregnated Bearing, Sintered Plain Bush, Sintered Flanged Bush, Sintered Spherical Bush, Sintered Spacer, Sintered Iron component , Sintered Harden Part, Powder Metal Component, Sintered Metal Component, Powdered Metal Component, Sintered Camshaft Bush, Sintered Outer Inner Rotor, Sintered Oil Pump Gerotor, Sintered Clutch Button, Sintered Lock Part, Sintered Slider Block, Sintered Washer, Sintered Rocker shaft Bush, Sintered Clutch Bush, Sintered Cam, Sintered exhaust Ring, Sintered structural components, self starter Bushes, dynamo bushes and parts, power tools parts, home appliances spare parts, mixer Bushes, juicer Bushes & many more as per Standards and customer's requirement. We are in this Trade since more than 16 Years and able to earn high reputation in the trade in India due to our Workmanship, Quality Policy & Standardization, Delivery Time and all our Terms & Conditions. We are also OEM's Supplier & an ISO: 9001:2008 Certified Company.
    ...more
    www
  • Premium
    Engine Valve Springs

    Engine Valve Springs

    5 - 17 / Piece

    • MOQ20 Piece
    • MaterialStainless Steel
    • ApplicationIndustrial
    • Storage ConditionCoil
    • Country of OriginIndia
    • Tensile Strength400 MPa
    • Elongation At Break4.8%
    • TechniqueHot Rolled
    • Diameter22 mm
    ...more
    www
  • Premium
    Diamond Steering Cone Set

    Diamond Steering Cone Set

    120 - 400 / Set

    • MOQ100 Piece
    • Packaging TypeBox
    • MaterialDiamond
    • Brand NameDiamond
    • ApplicationSteering Control Enhancement
    • ColorSilver
    • DimensionsStandard Size
    • WeightLightweight
    • DurabilityHigh Quality
    • Care InstructionsWipe With A Clean Cloth
    ...more
    www
  • Premium
    Diesel Engine Spares

    Diesel Engine Spares

    Get Price Quote

    • MaterialBrass
    • CertificationISO Certified
    • ApplicationEngine Use
    • Availability1-5kg, 10-15kg, 5-10kg
    • Packaging TypeAvailable in Many Colors
    • Surface FinishingPolished
    • Fuel TypeDiesel
    • We offer to our clients our premium range of Diesel Engine Spares. The Lister & Pitter Type Diesel Engine Spares that we offer come in various specifications. These Diesel Engine Spares, for different diesel engines, are procured from the leading brands in the market and hence are guaranteed for durability and performance. These Diesel Engine Spares are well tested under strict industry norms to assure durability.   Features Durable Perfect dimensions High performance Economic   Other Details Pay Mode Terms : L/C (Letter of Credit), T/T (Bank Transfer)
    ...more
    www
  • Premium
    Voltas Engine Mounting Lh/rh

    Voltas Engine Mounting Lh/rh

    950 / Piece

    • MaterialAluminium
    • ApplicationEngine Use,Forklift
    • Number Of FlowerEngine Bracket
    • Country of OriginIndia
    www
  • Premium
    Air Compressor Intake Valve

    Air Compressor Intake Valve

    Get Price Quote

    • MOQ5 Piece
    • MaterialStainless Steel
    • FinishingPolished
    • ApplicationAir Compressor
    • Number Of FlowerIntake Valves
    • Country of OriginIndia
    • Brand NameEutech
    • ConditionNew
    • WorkElectrical 
    • FeatureHeavy Duty
    • Features:- Advance Air Flow Control System Air Delivery Adjustment Range 0-100% Balance Air Supply And Air Consumption Energy Saving  
    www
  • Air Cooled Blocks +2

    Air Cooled Blocks

    530 / Piece

    • MaterialCast Iron
    • ApplicationIdustrial
    • ConditionNew
    • FinishingPolished, Non Polished
    • FeatureRobust Construction, Corrosion Resistance, Fine Finishing, Durable
    • We are manufacturers of a range of Air Cooled Blocks. Manufactured only from high grade ferrous and non-ferrous material, these are used in diesel engines, automobiles, tractors, air compressor and other earth moving equipment. Our range of cylinder blocks is highly appreciated by the global and domestic clients for features like durability, strength.
    ...more
  • Retainer Ring

    Retainer Ring

    Get Price Quote

    Circlips which are fitted may be removed with a pair of needle-nosed pliers or a special snap ring tool if the circlip is designed to include entry points for the pliers or tool. Alternatively, cautious leverage with a flat-headed screwdriver may be necessary in lieu of the correct tools or design of snap-ring.
    ...more
  • Precious Turned Engine Valves

    Precious Turned Engine Valves

    Get Price Quote

    Used in diverse engines such as Deutz Engines, Perkins Engines, Cummins Engines, etc. the Precious Turned Engine Valves, which we offer, are known for their dimensional preciseness. We are considered to be the most renowned Manufacturers, Suppliers and Exporters of the Precious Turned Engine Valves from Rajkot (Gujarat). Why Our Precious Turned Engine Valves? Dimensional precisionDurableExcellent finishPriced reasonably
    ...more
  • Automobile Connecting Rod

    Automobile Connecting Rod

    Get Price Quote

    Automobile Connecting Rod and Automotive Connecting Rods all type Heavy and Light Commercial Vehicles Connecting Rods, Diesel Engine Piston Crank or Crankshaft through the Connecting Rod Manufacturers Rajkot. 
  • Genset Connecting Rod

    Genset Connecting Rod

    Get Price Quote

    • MOQ7000 Piece
    • MaterialAluminium,Mild Steel,Forging,Cast Iron Heavy Duty,Steel Etc.
    • FinishingPolished
    • Size79mm
    • Country of OriginIndia
    • Pack TypeCarton Box
    • Surface FinishPolished
    • Industries Carters ToAutomotice Components, Automobiles & EGR, Boiler & Turbine Parts, Defense & Aerospace, Marine, Hardware & Power Transmission, Earth Moving & Textile & Machinery
    ...more
  • Valve Tappet

    Valve Tappet

    Get Price Quote

    • MOQ3000 Piece
    • Country of OriginIndia
    • Number Of FlowerValve Tappets
    • Packaging TypeBox,Carton
    • FeatureDurable,Good Quality
    • ApplicationIndustrial
    • MaterialMetal
    • BrandMahavir
    • BrandMercedes Benz
    ...more
  • Kirloskar Connecting Rods

    Kirloskar Connecting Rods

    Get Price Quote

    100% individually magnafluxed, Kirloskar Connecting Rods are highly appreciated for their high tensile strength, efficiency and sturdy construction. Based in Gujarat, we have established a niche in manufacturing, exporting and supplying precise design Kirloskar Connecting Rods in conformity with all industry norms. You can purchase light-weight Connecting Rods from us that are cost effective, durable and corrosion resistant. Timely delivery of all orders is our priority.
    ...more
  • Valve Tappet

    Valve Tappet

    Get Price Quote

    We are offering valve tappet controlled quality of chilled cast material is used to manufacture tappets options of using alloy steel like sae 8620 and heat treatment are also available. Profile tests are carried out along with material and hardness tests 100% strict inspection of dimensional parameters are carried out relevant components like guides and valves as well collets and covers are also available.
    ...more
  • Valve Seat

    Valve Seat

    Get Price Quote

    Ameera Exports is the leading manufacturer of Cast Valve Seat Inserts. While studying Valve Seat Inserts technically and mechanically we understand the aspects of Service Life of inserts. Working closely with our customers it is our duty to suggest which type of alloys is to be used in manufacturing of Valve Seat Inserts so as to ensure the durability and cost effectiveness of the valve seat inserts. Ameera Exports, is equipped with full in house capability of Mixing of Alloys, Casting, Spectrometer for Evaluation of Material and Degree Machine to attain the maximum accuracy in the degree of the Valve Seat Inserts. The Inspection and Quality maintenance program of Valve Seat Inserts   O.D. Roundness The roundness of the outside diameter should be held to 0.013mm maximum O. D. to Bottom Face Perpendicularity This specification should be held to 0.002mm per mm of width. Seat Surface Gauge Height The gauge height tolerance for the seat surface is typically ±0.04mm. Seat Surface Finish A finish specification of 0.8 Ra is typical of many manufacturers. Seat Surface Run-out to Bottom Face and O D Run-out of the seat to bottom face/O D is maintained to 0.04mm maximum. Seat Surface Angle The tolerance for seat surface angle is typically ± 0.25º. The exact interference angle must also be used and not the nominal seat angle most near net shaped VSIs have. Line Profile for Seat Surface Some manufacturers have a line profile (or roundness) specification for the seat surface. This specification is the most critical in ensuring a good seal between the valve and VSI. A typical specification for this feature is 0.02mm. . Some design considerations for the counter bore are as follows: Roundness A maximum counter bore roundness specification must be given. A typical specification is 0.013 mm. Any out-of-roundness on the counter bore can be transmitted to the valve seat surface. Counter bore to Valve Guide Perpendicularity The counter bore must be perpendicular with the valve guide. The specification of .002mm per mm should work well. These tolerances are intended as general guidelines. There are designs in existence that have tighter tolerance schemes and some with looser tolerance schemes.  
    ...more
  • INLET/EXHAUST VALVE +1

    INLET/EXHAUST VALVE

    Get Price Quote

    • MaterialMetal
    • Packaging TypeMetallic
    • ApplicationIndustrial
    • Surface FinishingPolished
    • ResistivityRust Resistant
    • We develop both inlet valves as well as exhaust valves which are made by gathering Metal upset forging process and bimetallic valves are friction welded. Various processes such as chrome flash on stem, stellite on the seat and tip area with nitriding-tuftriding etc. processes. EN24(BS817M40), EN52(BS401s45),21-4N(BS349S52) etc. materials are used.
    ...more
  • Automotive Connecting Rods

    Automotive Connecting Rods

    Get Price Quote

    We offer Automotive Connecting Rods in the market. Used in assortment of automotive industries, the Automotive Connecting Rods offered by us are high on demand. Made from high quality aluminum, our Aluminum Connecting Rods are appreciated for features like high durability and corrosion resistance. The Automotive Connecting Rods are available at industry leading prices. Furthermore, we are counted as the principal Connecting Rods Exporter from India. Highlights Of Automotive Connecting Rods Dimensionally accurateCost effective Strong
    ...more
  • Air Cooled Cylinder Block Kit +2

    Air Cooled Cylinder Block Kit

    300 - 600 / Piece

    • MOQ3 Carton
    • Country of OriginIndia
    • MaterialMetal
    • FeatureRust Proof
    • FinishingPolished
    • Total Carbohydrate1yrs
    • MOQ3 Carton (1 Caton = 18 Pcs)
    ...more
  • Rocker Arm

    Rocker Arm

    Get Price Quote

    A rocker arm is an oscillating lever that conveys radial movement from the cam lobe into linear movement at the poppet valve to open it. One end is raised and lowered by a rotating lobe of the camshaft either directly or via a tappet (lifter) and pushrod while the other end acts on the valve stem. When the camshaft lobe raises the outside of the arm, the inside presses down on the valve stem, opening the valve. When the outside of the arm is permitted to return due to the camshafts rotation, the inside rises, allowing the valve spring to close the valve. Rocker arm is part of an internal combustion engine of automotive, marine, motorcycle and reciprocating aviation types. “Coming Together is the Beginning, Staying Together is Progress and Working Together is Success”. This statement is the reflection of our business ideology which is transformed into whatever we do in manufacturing industry or service industry. Today we are manufacturing more than 250 different types of Automobile Components for Indian and Global Clients.we are also providing all kinds of Engine Parts as per drawing or samples of the Customers.
    ...more
  • Orthopaedic Connecting Rod (8mm)

    Orthopaedic Connecting Rod (8mm)

    Get Price Quote

    Located in Rajkot(India), the company has carved a niche for itself in the market with its flawless range. We understand how important packaging is. Therefore, we make sure our products are packed properly, have smudge-proof labels and are aesthetic to look to lure in more customers.
    ...more
  • Compressor Connecting Rod

    Compressor Connecting Rod

    Get Price Quote

    • MOQ50 Piece
    • MaterialAluminium
    • Country of OriginMade in India
    • Brand NameDaikin
    • ApplicationAutomobile Industry
    • Thickness40 mm
    • Packaging TypeCarton Box
    • Rod TypeConnecting Rod
    ...more
  • Forged Rocker Arms

    Forged Rocker Arms

    18 / Piece

    • MOQ5000 Piece
    • Brand NameSAI
    • MaterialMS
    • Country of OriginMade in India
    • Usage/ApplicationAutomobile
    • Product TypeForged Product
    ...more
  • Lister Diesel Engine Parts

    Lister Diesel Engine Parts

    Get Price Quote

    We have been exporting best quality agricultural lister diesel engine parts through our popular brand kbs for lister and petter (kirloskar) type engines round the world. This range of lister diesel engine parts is tested on diverse parameters for quality control. We offer lister diesel engine parts is brought to the clients at market leading rates.
    ...more
  • YORK JS CONNECTING ROD

    YORK JS CONNECTING ROD

    1,500 /

    • MOQ10 Piece(s)
    • MaterialS.G. IRON
    • Country of OriginGUJARAT ,India
    • We offers replacement spare parts of york compressor model j & e - series. We are also trading refurbished remanufactured york - series compressor for meeting stock utility requirements
    ...more
  • Connecting Rod

    Connecting Rod

    Get Price Quote

    • ApplicationEngine part
    • SizeStandard Size
    • MaterialAluminum
    • Brand NameVarious Engineering
    • Model NumberVE001004
    • Supply Ability10000 Piece/Pieces per Month
    • PackingStandard Packing
    • Packaging DetailsAs per customer requirement.
    ...more
  • Diesel Engine Cylinder Liner

    Diesel Engine Cylinder Liner

    Get Price Quote

    • MOQ100 Piece(s)
    • Brand NamePLAZA
    • We are a reputed manufacturer, exporter and supplier of Cylinder Liners which are centrifugally casted. The Cylinder Liners that we manufacture have bearing metal qualities that cause skin healing after abrasion and a structure that is readily wetted by oil and retains an oil film. These liners have the capability of centrifugally forcing impurities which are lighter than the iron to the bore surface from which they are removed by machining. We are also able to supply these cylinder liners at a low rate as we can manufacture them very effortlessly through our skilled labor and state of art infrastructure.
    ...more
  • Diesel Engine Spares +6

    Diesel Engine Spares

    Get Price Quote

    We are ranked amidst the renowned Manufacturers and Suppliers, presenting engineer precision Diesel Engine Spares. The Spares for Diesel Engine we offer are designed using the finest components and under the strict supervision of industry professionals. Our quality centric approach and commitment helps us to deliver the Spares that are as per the global standards. Owing to our trustworthy shipping facilities to deliver the same in the stipulated time span.
    ...more
  • Diesel Engine Parts

    Diesel Engine Parts

    Get Price Quote

    • generating Setalternator
    • We Offer Diesel Engine Parts. Spares Parts - For Both Lister and peter type engine, Diesel Engine Spares, Engine Parts , Diesel Engine Parts , Piston Rings , Diesel Engine Parts, Generator Part
    ...more
  • Valve Seats Inserts

    Valve Seats Inserts

    Get Price Quote

    The valve seat insert prevents the impact/burying of the valve into the cylinder head. It absorbs a proportion of the combustion heat with which the valve is charged. The valve seat insert gives off this heat to the cylinder head. To meet the different strains, an optimum material composition of the valve seat inserts must be found. Not only must the operating conditions in the engine be considered, but also the machinability of the material for the engine reconditioned. Valve Seats are made from High Quality Chromium and Nickel. Valve Seats ground surface is maintained 15 to 20 microns and face parallelism @ 10 microns. 100% dimensions Inspection and Visual Inspection of Valve seat Inserts. Hardness of Valve Seats must be 30 to 35 HRC. Materials In the most recent engine generations of renowned car manufacturers, valve seat inserts made of sintered material (powder metallurgical procedure) are used. The increasingly high, thermal strain of the seat insert in the combustion chamber can hardly be met anymore by materials from conventional casting processes. For this reason, Motorservice offers sintered valve seat inserts amongst others from two different material combinations, which covers the entire application range of future engines. Sintered Metal Seat Inserts Cast Iron Seat Inserts Production Capacity 30000 pieces per month *Believe in Quality not Quantity
    ...more
Filter by Locality
top