Engine Valve Dealers in Rajkot

(225 products available)
  • Bukh Engine DV20 DV10 Valves

    Bukh Engine DV20 DV10 Valves

    35 / Piece

    • MOQ100 Piece
    • MaterialMetal
    • ApplicationEngine Use
    • FeatureEasy Maintenance.
    • Brand NameDev
    • Weight.4 kg
    • Dimensions6 × 6 × 14 cm
    • Besides these we can also supply following Parts : - Big End Bearings Part No 40563 / 000E 0563  DV20 DV24 DV29 DV36 DV32 DV48 - Main bearing liner Part No 000E 4765 / 000E4765  DV36 - Bukh DV24 DV29 DV32 Engine PISTON Assembly 008E7679,   Bukh DV20 DV10 Valves for Marine Engine 000E9113 Inlet and 000E9114 Exhaust Valve. A high quality replacement Valve Pair for Bukh DV 2 Cylinder and 1 Cylinder Marin diesel Engine. Engine Valves Pair is suitable for Bukh with Bore X Stroke – 3.35″ x 3.35 in (85 x 85 mm)
    ...more
    www
  • Engine Valves

    Engine Valves

    Get Price Quote

    • Head Diameter18 mm
    • Stem Diameter5 mm
    • Engine Valves of engine valves and supplies complete range of designated products for customers throughout the globe. The extensive design and material expertise of Shailesh Industries guarantees customer-specific, integral, functional, and cost-optimized solutions which withstand the toughest operating conditions.
    ...more
  • Engine Valves

    Engine Valves

    Get Price Quote

    We are offering engine valves. High quality engine valves manufactured with hot forging process very precise machining and grinding with oem specification tolerances using high profile computerized controlled machineriesreplica cartier watches high chromium and nickel based material being used. Specifications en 52, 214n, ss 316, incanel and can use any knock off patek philippe material as per specification special tip hardening maintained above 53 hrc. Chrome plating, anodizing,knock off patek philippe phosphating and shot blasting options available each part is passed through replica omega for sale value added burnishing process
    ...more
  • Exhaust Valves

    Exhaust Valves

    Get Price Quote

    Our inlate & Exhaust Valves made from the various types of raw material like EN24(BS817M40), EN52(BS401s45), 21-4N(BS349S52) which is imported from the reputed European and Japanese steel manufacturers.
  • Honda Engine Valve

    Honda Engine Valve

    29 / Set

    • MaterialMs
    • Dimensionstandard
    • Usage/Applicationvehical
    • Packaging Typebag
    • Engine Typevalve
    ...more
  • Inlet Engine Valve

    Inlet Engine Valve

    49 - 2,499 / Piece

    • MaterialCarbon Steeel, Metal, Stainless Steel,EN-8D, EN-9, EN-18D, EN-19, EN-24, EN-52, 21/4N, SS-101, Inconel
    • ConditionNew
    • ApplicationEngine Use
    • Number Of FlowerInlet
    • Country of OriginIndia
    • Our precision-engineered inlet valves are crafted from high-tensile stainless steel to optimize airflow and enhance combustion efficiency. Designed for strength, thermal stability, and wear resistance, these valves contribute to improved engine performance and fuel economy. Suitable for a wide range of applications, including two-wheelers, four-wheelers, and industrial engines, they are available in both standard sizes and custom dimensions to meet specific engine requirements. Manufactured to global quality standards, our inlet valves ensure reliable performance and longevity across diverse markets and operating conditions.
    ...more
  • Engine Valve

    Engine Valve

    Get Price Quote

    • MOQ100 Set(s)
    • Number Of FlowerEngine Valves
    • MaterialStainless Steel
    • ApplicationEngine Use
    • ConditionNew
    • Total Carbohydrate2yrs
    • The inlet valves seal the intake port, through which the air flows into the combustion chamber and exhaust valve control the flow of combustion gases and let them stream out after the combustion cycle.Valves are nitride to increase the exhaustion strength, Chrome plated to increase the wear resistance and Stellited (Seat hard Faced) to get high hot hardness at the seat.
    ...more
  • Valve Tappet

    Valve Tappet

    Get Price Quote

    • MOQ500 Piece(s)
    • Country of OriginIndia
    • Brand NameBon
    • QualityStandard
    • Sizeod - 32 mm, id - 19.95 mm, l - 76.20 mm
    • Model Numberd 2876, d 2530, d 2538, om 442
    • OE No.51.04301.0109 & 51.04301.0110, 476050 0025 & 422050-0325
    • This valve tappet is suitable for engine of the man & mercedes benz. Which model number for man is d 2876 d 2530 d 2538 and model for mercedes benz is om 442 turbo. Oe number for man is 51.04301.0109 & 51.04301.0110 and oe number for mercedes benz is 476050 0025 & 422050-0325 and size of this tappet is od - 32 mm, id - 19.95 mm, l - 76.20 mm.
    ...more
  • Engine Valves

    Engine Valves

    100 - 300 / Piece

    • MOQ10000 Piece
    • Country of OriginIndia
    • MaterialStainless Steel
    • ApplicationEngine Use
    • FeatureDurable
    • Total Carbohydrate1yr
    ...more
  • Motorcycle Valve

    Motorcycle Valve

    Get Price Quote

    We feel pride in introducing ourselves as one of the distinguished firms engaged in manufacturing and supplying the best quality Motorcycle Valve. Motorcycle Valve is being manufactured under highly controlled industrial environment. Moreover, our quality auditors keep a strict watch on the entire manufacturing process before the final dispatch.
    ...more
  • Valve Seat Inserts

    Valve Seat Inserts

    Get Price Quote

    Valve Seat Inserts that is manufactured from Alloy Cast Iron Heat Resistant material assures our customers for authenticity and reliability. Durability and high precision are the qualities due to which, this engine valve seat is used in various in engines. This has assisted us in augmenting large number of customers all over the world. Available in varied dimensions, these valve seats can be obtained at most competitive prices of the industry. Inlet valve Seat/ Exhaust Valve Seat Insert are manufactured from Alloy Cast Iron Heat Resistant material & also from chrome-silicon alloy steel Stellite ® seated. We are also manufacturing Over Size Inlet / Exhaust Valve Seat Insert as per customer requirement. Note : Stellite ® is registered trademark of Dellro Stellite, UK
    ...more
  • Valve Seat Inserts

    Valve Seat Inserts

    Get Price Quote

    • MaterialMetal
    • ApplicationIndustrial
    • Number Of FlowerSilver
    • Surface FinishingPolished
    • ResistivityRust Resistant
    • Made from the assimilated alloys, our manufactured Valve Seat Inserts are widely demanded by clients. Our wide range Of Valve Seat Inserts is made from Nickel, Chrome, Cobalt and Iron based alloys that display superior wear and heat resistant properties. The consistent demand of clients has inspired us to manufacture up to the desires of clients. For that desire, we are positioned on top as the trusted manufacturer and exporter of Valve Seat Inserts. Used For :- Internal combustion gasoline or diesel engine is the surface against which an intake or an exhaust valve rests during the portion of the engine operating cycle when that valve is closed Made From :- Nickel Chrome Cobalt Iron based alloys Features :- Display superior wear Heat resistant properties Durable Long lasting life
    ...more
  • Engine Valves

    Engine Valves

    Get Price Quote

    Inlet and Exhaust valve are high-precision engine components   Their role is controlling the flow of gases in the diesel engine.   The inlet valves seal the intake port , through which the air flows into the combustion chamber and exhaust valve control the flow of combustion gases and let them stream out after the combustion cycle.
    ...more
  • Bus Engine Valve

    Bus Engine Valve

    100 / Piece

    The Bus Engine Valves, which we deliver, are acclaimed for thier simple installation and high durability. Our reliable and superfast shipping facilities will not let you wait much and will efficiently deliver the range to your doorstep. With the assistance of our packaging experts and advanced machines, we became capable of meeting the standard as well as customized packaging requirements of the clients.   Features: High durability Simple installation Fine finish
    ...more
  • Valve Tappet

    Valve Tappet

    Get Price Quote

    Controlled quality of Chilled Cast material is used to manufacture tappets Options of using alloy steel like SAE 8620 and heat treatment are also available. Profile tests are carried out along with material and hardness tests 100% strict inspection of dimensional parameters are carried out Relevant components like guides and valves as well collets and covers are also available. Anodising, Blackening options are available. complete range of products are available.
    ...more
  • Chromium Plated Engine Valve

    Chromium Plated Engine Valve

    Get Price Quote

      The Chrome plated Engine Valve are manufactured by plating chrome on the stem of the valve. It lengthens durability in the valve and increases stem resistance.
  • Engine Valves

    Engine Valves

    Get Price Quote

    • MaterialMetal
    • ApplicationEngine Use
    • CertificationISO 9001:2008 Certified
    • FeatureDurable
    • Number Of FlowerEngine Valves
    • Total Carbohydrate2yrs
    • Special FeaturesGood Quality
    ...more
  • Valve Seat

    Valve Seat

    Get Price Quote

    Ameera Exports is the leading manufacturer of Cast Valve Seat Inserts. While studying Valve Seat Inserts technically and mechanically we understand the aspects of Service Life of inserts. Working closely with our customers it is our duty to suggest which type of alloys is to be used in manufacturing of Valve Seat Inserts so as to ensure the durability and cost effectiveness of the valve seat inserts. Ameera Exports, is equipped with full in house capability of Mixing of Alloys, Casting, Spectrometer for Evaluation of Material and Degree Machine to attain the maximum accuracy in the degree of the Valve Seat Inserts. The Inspection and Quality maintenance program of Valve Seat Inserts   O.D. Roundness The roundness of the outside diameter should be held to 0.013mm maximum O. D. to Bottom Face Perpendicularity This specification should be held to 0.002mm per mm of width. Seat Surface Gauge Height The gauge height tolerance for the seat surface is typically ±0.04mm. Seat Surface Finish A finish specification of 0.8 Ra is typical of many manufacturers. Seat Surface Run-out to Bottom Face and O D Run-out of the seat to bottom face/O D is maintained to 0.04mm maximum. Seat Surface Angle The tolerance for seat surface angle is typically ± 0.25º. The exact interference angle must also be used and not the nominal seat angle most near net shaped VSIs have. Line Profile for Seat Surface Some manufacturers have a line profile (or roundness) specification for the seat surface. This specification is the most critical in ensuring a good seal between the valve and VSI. A typical specification for this feature is 0.02mm. . Some design considerations for the counter bore are as follows: Roundness A maximum counter bore roundness specification must be given. A typical specification is 0.013 mm. Any out-of-roundness on the counter bore can be transmitted to the valve seat surface. Counter bore to Valve Guide Perpendicularity The counter bore must be perpendicular with the valve guide. The specification of .002mm per mm should work well. These tolerances are intended as general guidelines. There are designs in existence that have tighter tolerance schemes and some with looser tolerance schemes.  
    ...more
  • Engine Valve

    Engine Valve

    Get Price Quote

    Fabricated using high grade metal and latest technology, our team of dexterous members produce flawless Engine Valve. Known for there outstanding performance, we are the prominent Manufacturer and Supplier of sturdy construction Engine Valve. Our quality analysis team makes sure that Engine Valve is corrosion resistant, can withstand high temperature and is easy to install. Competitive prices and on-time delivery are the factors that distinguish us from our competitors.
    ...more
  • Stainless Steel Valve Seat

    Stainless Steel Valve Seat

    Get Price Quote

    • MOQ500 Piece
    • TypeValve Seat
    • MaterialStainless Steel
    • ColorSilver
    • UsageIndustrial Applications
    • ShapeCircular
    • FinishSmooth
    • We are a leading Manufacturer, Exporter, and Supplier of high-quality Stainless Steel Valve Seats designed for industrial applications. Crafted from durable stainless steel, these circular valve seats feature a sleek silver finish and a smooth surface. Ideal for various industrial uses, our valve seats ensure reliable performance and longevity. Trust our expertise to provide you with top-notch stainless steel valve seats that meet your specific requirements and exceed your expectations.
    ...more
    www
  • Exhaust Valve

    Exhaust Valve

    Get Price Quote

    Due to our superior transit system and vast distribution network, buyers can be rest assured for timely delivery. Listed amidst the reliable names hailing from Trichy(India), we deliver top-notch quality products.
  • Valve Seat

    Valve Seat

    Get Price Quote

    • MaterialsSteel,Copper,Zinc,Copper,Stainless Steel
    • ShapeRound
    • UsageAutomobiles,Industrials
    • Product TypeButterfly Valves
    • Thickness3 MM,4 MM,5 MM
    • We are the main supplier of this product.
  • Valve Seats

    Valve Seats

    Get Price Quote

    Valve Guides are made from Cray Cast Iron alloy. We offer Brass Bronze and Copper backed materials. The machining of outer diameter with tolerance 15 to 20 microns and dinner diameter 25 Microns. Cylindrical Grinding is done to archive geometrical parameters. Valve Guides are hardened up to 210 to 260 BHN.
    ...more
  • Type of Engine Valve

    Type of Engine Valve

    Get Price Quote

    Nextech offers one of the widest ranges of Intake and Exhaust Engine Valves, for internal combustion engines in range of sizes with verity of materials. At our state-of-the-art facilities, we manufacture Engine Valves to the highest standards, serving the needs of our customers across a whole range of Automobile and Engineering industries with the latest and advanced CNC technology. Nextech Engine Valves are used in some of the most demanding applications for Automobile and Engineering Industries, including Global Automotive Industry, On and Off Road Vehicles, Marine, Locomotive as well as applications like general industrial and Stationary engines. We provide custom design and manufacturing services for developing customized Engine Valves. Our OEM customers see significant reductions in development costs, integration costs, support costs, and time to market. With our assistance, you are free to focus on developing your core products while we develop the necessary products to support your needs. We are committed to partnering with our customers to offer rapid development, prototyping and pilot production of Engine Valves tailored to each customer's specific needs. This unique team approach enables a speedy yet thorough process development cycle. Customers can gauge production worthiness, timelines, and eliminate risk before production while gaining a realistic evaluation of costs. Companies also able to get material, data and process information in a timely fashion to meet aggressive schedules and requirements of higher tier clients. Material Selection The multiple stresses of the material in the valve are being met with a few standardized grades and specific ways of manufacture. The path of the material from bar stock to the finished valve is being followed. Engine development in the past decades increased the load on the valves which could be met by continuously developing their structural strength. Also the strength of all valve materials could be raised to nominal strength above 1100 Mpa by applying specific methods. Higher strength at the surface is being effectuated by work hardening effects. The technology to increase reliability of valves and new aspects of valve seat facing including residual stress is explicitly consider while manufacturing valve.
    ...more
  • Diesel Engine Liner Valve

    Diesel Engine Liner Valve

    Get Price Quote

    Customers can get in touch with us for obtaining our qualitative range of Diesel Engine Liner Valve. The Diesel Engine Liner Valve we offer is appreciated for its precise design, unmatchable strength, fine finish and quick operation. We ensure prompt delivery across the world.
    ...more
  • Engine Valves

    Engine Valves

    Get Price Quote

    High quality engine valves manufactured with hot forging process Very precise machining and grinding with OEM specification tolerances using high profile computerized controlled machineries High chromium and nickel based material being used. Specifications EN 52, 214N, SS 316, Incanel and can use any material as per specification Special Tip hardening maintained above 53 hrc. Chrome plating, anodizing, Phosphating and shot blasting options available Each part is passed through value added burnishing process Wide range up to 700 models suitable for worldwide cars, trucks, tractors and industrial engines.
    ...more
  • Exhaust Valves

    Exhaust Valves

    Get Price Quote

    • Number Of FlowerControl Valves
    • MaterialHigh-Temperature Resistant Alloy
    • ApplicationExhaust Control In Industrial Applications
    • DurabilityHigh Temperature Durability
    • Corrosion ResistanceUtterly Corrosion Resistant
    • Among the Exhaust Valves Manufacturer, intake valves suppliers and exporter, Precision Parts Industries is foremost source for robust exhaust control valves. We manufacture unparalleled selection of vigorous exhaust valves which have high temperature durability. Moreover, we offer unequaled range of exhaust control valves which ate utterly corrosion resistance. Lastly, our peerless exhaust control valves are entirely admired by our esteemed clients.
    ...more
  • Engine Valves

    Engine Valves

    32 - 115 / Set

    • MOQ100 Set(s)
    • Number Of FlowerEngine Valves
    • MaterialCarbon Steeel, Metal, Stainless Steel
    • Length0-100mm, 100-200mm, 200-400mm
    • ApplicationEngine Use
    • PatternPlain
    • ConditionNew
    • Automatic GradeAutomatic, Manual
    • PressureHigh Pressure, Low Pressure, Medium Pressure
    • FeatureCasting Approved, Durable, Smooth Finish And Robust Design
    • We offer 2/3/4 wheeler Engine Valve. Our clients can avail from us a qualitative range of Engine Valves at highly competitive range. These valves are preferred for 2/3 wheeler, cars, trucks and tractors of various models, thus, are highly demanded by the clients. The range of valves offered by us is available in different sizes to meet the varied requirements of the clients.
    ...more
  • Valve Guide & Tappets

    Valve Guide & Tappets

    Get Price Quote

    The Valve Guide & Tappets, which we provide, are used for all kind of marine engine like Yanmar Marine Engines, Caterpillar Marine Engines, etc. Generally these Valve Guide & Tappets are wearing parts so they should be replaced periodically. We are reliable Manufacturer, Supplier and Exporter of the Valve Guide & Tappets. Highlights Best quality material used : EN32 and EN8.Easy to fitExcellent resistance to wear and tearSmooth finish
    ...more
  • Engine Valve

    Engine Valve

    Get Price Quote

    Syntech Auto is specialized in manufacturing varieties of Engine Valves making use of all kind of materials. Following are the special processes which are performed on the valve resulting the best quality. For engine valves distributors who requires different metallic composition Syntech Auto is able to produce accordingly by offering number of valve grade, which will meet American, European and Japan standards along with our manufacturing and quality standards. Features: Superior quality Durability Long life Less maintenance Competitive price Applications:     Automobiles Trucks For-lifts Tractors Marine engines Diesel engines Earth moving engines
    ...more
Filter by Locality
top