Pollution Control Machines Dealers in Rajkot

Iron body powder coated (for longer life) hoods for better dust collection.   Recovered gold dust (Drawer) lock facility.   Pocket cloth filter of 10 microns for maximum recovery.   PL light with toggle switch on the hood.   Foot shaker lever for dusting the dust in tray.   Inbuilt silencer for noise reduction.   Strong suction and bench polishing motors.   1 year guarantee for suction and polishing motors.  

INCINERATORS Waste disposal is becoming threatening problem to the Natural Environment. To protect the environment from the hazardous waste, efficient and reliable incinerating system is the only feasible solution.

Material not passing through Blower. It can be supplied with a mechanical shaker or with Pulse Jet automatic cleaning. Dust collectors are useful for Foundries, Machine Shops, Chemicals, Pharmaceuticals, Foods, Textiles, Dyes, Paints & for control of any kind of dust creating points.

IT IS HEAVY DELUX CUTTING MACHINE WHICH CUT THIN STRIPS WHICH IS MOSTLY USED IN POMEGRANATE, Apple, etc other breakable product during export... it's fully equipped and automatic we with standard accessories and with multiple blade.

Hydrocyclone is used to separate or sort particles in liquid with different densities of the particles and may be used to separate liquids from solids. Hydrocyclone can also be used to separate liquids of different density. B. M. Industries manufactures, exports, and supplies the best quality Hydrocyclone. Our Hydrocyclones are widely appreciated for their high performance and longer service life. Construction and Working : A Hydrocyclone has a cylindrical section at the top where liquid is being fed, and a base. The angle, and hence length of the conical section, plays a role in determining operating characteristics. It has two exits on the axis: the smaller on the bottom (underflow or reject) and a larger at the top (overflow or accept). The underflow is generally the denser or thicker fraction, while the overflow is the lighter or more fluid fraction. Internally, centrifugal force is countered by the resistance of the liquid, with the effect that larger or denser particles are transported to the wall for eventual exit at the reject side with a limited amount of liquid, while the finest, or less dense particles, remain in the liquid and exit through the overflow side through a tube extending slightly into the body of the cyclone at the center. Forward Hydrocyclone remove particles that are denser than the surrounding fluid, while reverse hydro cyclones remove particles that are less dense than the surrounding fluid. In a reverse Hydro Cyclone the overflow is at the apex and the underflow at the base.

Liquid Waste, May be Hazardous Liquid or Just High TDS Water waste, Liquid Chemical Waste, Pharmaceutical Liquid Waste, etc. Required Incineration when for Disposal. Sometimes Liquid Waste becomes Headache for the Industry. Many Dyes, Intermediates, Chemical Companies, Medical, Pharmaceutical Companies, Medical Clinics, Hospitals, Packaging Industry, Food Industry, Textile Industry, etc. generates very high Quantity of Liquid Waste. The Waste water can be treated and we recommend to check the possibilities to treat the water and try to recover normal water from it. When there is no any other solution to reuse the Liquid waste and incineration is the only option for disposal of such Liquid Waste, Please go ahead. We design The Incinerators specially for Liquid Waste. The Liquid Waste Incinerator s, which we design, can incinerate the Liquid as per the Norms and guidelines of Environment Standards. We provide Liquid Waste Pre Heater to pre heat the Waste before feeding to combustion chamber. This process saves Fuel for Liquid Waste Incineration. Sometimes, we design Evaporator to convert the Liquid in Gas and then incinerate the gas which may be easy to follow the norms & emission standards of incineration.

we offer Solid Waste Handling Equipments. Auto Lifter is an equipment developed on a three wheeler, and helps in collection, transportation and dumping of Garbage

We are offering dust collection system to collect the dust particles in terms of harmful gases, chemical particles, and hazardous floating materials in the air or gas produced during the production process. Dust collector system is an air control equipments to capture the poisonous particles created during the production process which are absorbed in the dust collector before release the gas into the atmosphere. Dust collector system from acme air equipments is made up of particular material having capacity to trace the particles those not visible through necked eyes and existing in the gas in micron sizes. Dust collector system is a replaceable system on saturation with pollutants. There are the controllers to check the efficiency of dust collector system to frequently check them before the production starts. If the system is fully saturated with absorbed particles. It has been changed with new one to release produced gas without harmful particles.

Silotop R03 (Reverse Airjet Cleaning Type) With tens of thousands of filters working worldwide, since first going into production back in 1998, Silotop has become the world's favourite solution for bin or silo venting. Silotop is a cylindrically shaped dust collector for venting of pneumatically filled silos. its stainless steel body contains vertically mounted, poly pleat filter elements. the air jet cleaning system is integrated into the hinged weather protection cover.   Function: Dust separated from the air flow by special poly pleat filter elements drops back into the silo after an integrated automatic reverse air jet cleaning system inside the weather protection cover has removed it from the filter elements.   Features: Compact 800 mm (30 in) diameter, stainless steel body with bottom flange 24.5 m2 (264 sq ft) filter surface Maintenance height = 1,100 mm (3.6 ft) High filtration efficiency due to POLYPLEAT filtering elements Low dust emission level due to B.I.A.-certified filter media Maintenance-free air jet cleaning unit integrated inside weather protection cover Safe weather protection cover with lockable quick release Tool-free filtering element removal   Benefits: Robust design Perfectly accessible due to compact design Filtering element replacement within a few minutes by one person   Options: Weld-on bottom ring Multifunctional electronic differential pressure meter Winter protection for solenoid valves Request Callback   Additional Information: Minimum Order Quantity: 1 Unit

We offer frp scrubber system. * good chemical and weather resistance * light weight * high physical and mechanical strength * easy to handle * easy maintenance, provide less down time * good insulating

Hydraulic cylinder for waste management Vehicle mounted rear loading garbage compactors shall be robust in construction and shall be able to collect of garbage and refuse from different spots and then transport it to dumping ground. The unit shall be operated by hydraulic systems. Proper distribution of load on front & rear axles should be achieved without overloading the axles in any circumstances. The refuse shall be pressed by hydraulic cylinder attached in the solid waste application into the compactor by a pressing plate & the mechanism shall enable the full body volume to be filled with compacted refuse. The refuse shall be unloaded by an ejector plate which is managed by the hydraulic cylinder.

Our enterprise is counted among the reliable enterprises, offering a range of fume scrubber system. These are manufactured under the supervision of experienced quality inspectors as per international norms and standards. The offered scrubber systems are widely used for fume absorption and extraction systems. Further, we provide customized version of these fume scrubber systems as per the specifications drawn by the esteemed customers.

SALIENT FEATURES Good Chemical, Corrosion and Weather Resistance High Physical and Mechanical Strength High Strength to weight ratio Highly Durable Higher conveying ability due to glossy internal finish & hence less pump loads. Abrasion resistance Lower thermal conductivity Resistant to galvanic & stray electrical currents Excellent thermal insulation Good adaptability & dimensional stability UV resistant, Aesthetically appealing, Flexibility in design, Light in Weight and hence easy to handle and install Good Insulating Qualities Ease of Maintenance with Zero Downtime Economical & cost effective TECHNICAL SPECIFICATION Our FRP Scrubbers having a wide range of applications and sizes. DESIGN STANDARDS Major Design Standards: BS 4994, ASME RTP-1 As per standard process design SIZE As per customer requirements MATERIAL OF CONSTRUCTION FRP Moulded and Filament Wound using Isopthalic, Bisphenol, Vinylester and Epoxy Resin PP & HDPE Spiral Wound PP/FRP, PPH/FRP, PVC/FRP, CPVC/FRP, PVDF/FRP, ECTFE/FRP, FEP/FRP QUALITY SPECIFICATIONS Qualification as per BS 4994

・Piping: Flange type, flange body type, direct piping type・Orifice machining on the outlet is not necessary, so piping man　hour is reduced. (Flange body type)・Enclosure: IP65＊＊Electrical entry flat terminal type terminal is IP40.・Applicable for high temperature: Fluid temperature 100℃・Flat terminal type added.・Controller dedicated for operation series VXFC

Acme air equipments company pvt. Ltd.-an iso 9001-2008 company- offers an engineering solution to a commonly faced industrial problem. In many industrial situations surrounding atmosphere is laden with spillage or escape of very low density solid matter which hampers the production and causes the environmental problems which are detrimental to health. These hazardous particles need to be trapped in dust collection system (centralised vacuum cleaning system) and conveyed to a pre-determined location. We design and manufacture the complete dust collecting system to handle this problem. The major parts of the central vacuum cleaning system can be either packaged in a modular enclosure which will house the vacuum source, vessels and control. Alternatively they can be separately installed depending on the space and ease of operation.

Completely welded construction prevents solids from bypassing the filter bags, which is usually the case in conventional Sewn bags due to Needle holes of seams. Flanges bag collar with integral gasket avoids bypass of unfiltered liquid due to optimum compression sealing arrangement. Dual Handle lift-out for quick and easy filter bag removal also eliminates contact with unfiltered liquid or dirt. Treated Exterior surface minimizes fiber migration in downstream. Fully combustible construction provides total incineration at low temperature and reduces disposal cost. High strength design minimizes bag breakage reducing product failure. Low-Pressure Drop offers greater yield per filter bag. Permanently embossed micron rating and filter bag size eliminates incorrect replacement. Offers low-cost high-performance liquid filtration. ACCUFIT WELDED – IP SERIES IP Series (Integrated Polymeric support) provides enhancement of Accufit welded filter bag series with the addition of structural layer and is ultrasonically laminated to the internal composite of the bag to offer unique benefits. It allows a significantly greater differential pressure before change-out. A nonwoven, Polypropylene spun bond jacket eliminates fiber migration in downstream. The bag has an inverted bottom and has an edge on the longitudinal weld. ULTRAFIT ULTRAFIT sets new standards for high-performance liquid filtration with its patented ultrasonic laminating process. It offers unique benefits such as 1. 100% FDA compliant composite layer; melt-blown polypropylene microfiber provides optimum efficiency and enhanced solids loading. 2. Zero Bypass collar to eliminate solid bypass. 3. Multiple layers of graded-density, melt-blown polypropylene serves as a primary upstream filter. 4. Separately jacketed, this pre-filter collects larger particles thereby preventing them from prematurely blinding the media below. 5. With the fluid progressing downstream, the layer of absolute-rated microfiber captures finer particles. 6. A layer of nonwoven spun bonded is used to jacket the filtering membrane, providing structural support and minimizing fiber migration downstream, thereby resulting in superior product with economical pricing. Various Ultrafit Series are available for distinct application. ULTRAFIT WELDED 100 1. Best suitable for batch or small application or as a final filter where the range of particle size is fairly narrow and consistent. 2. Superior to either felt bag or cartridges. 3. Designed to provide highly efficient liquid filtration for application requiring a consistent level of purity. 4. Absolute-rated material achieves 97% filtration efficiency in micron rating from 1-200. ULTRAFIT WELDED 500 1. High loading and efficiency demanding application. 2. Unique ability to effectively filter liquids where particle vary in both size and distribution. 3. Achieves efficiency levels of at least 99%. 4. Micron rating from 0.5 to 50.

Double Station Single Motor Dust Collector Iron body powder coated (for longer life) hoods for better dust collection.   Recovered gold dust (Drawer) lock facility.   Pocket cloth filter of 10 microns for maximum recovery.   PL light with toggle switch on the hood.   Foot shaker lever for dusting the dust in tray.   Inbuilt silencer for noise reduction.   Strong suction and bench polishing motors.   1 year guarantee for suction and polishing motors.   Single phase and three phase motor available as per requirement.