Air Generator Dealers

Energypack direct air heater supplied with direct mixing of flue gas generated with air to supply air at temperature up to 700 deg c energypack horizontal smoke tubeshell & shell design indirect hot air generator for operating temperature up to 250 c suitable for all the fuels like coalwoodbriquetteoilgasfurnace oil. Higher temperature as per the requirement of client can be supplied

Hot Air Generators, offered by JATINDERA BOILER COMPANY, are one of the hugely popular Diesel/Gas Fired Hot Air Generators/Heaters. Our Hot Air Generators are the best alternative solutions for all Air Heating applications. Construction : Use Reverse Flame Technology that is beneficial for the air heating applications Insulated casing is embedded with LRB Mattress / Mineral Wool Fully automatic ON/OFF Imported Burner is provided to smoothen up the operations. Combustion Chamber fabricated out of SS-304/314 smoke tube/Membrane Ventilation blower fan, which is dynamically balanced Fully automatic Control panel dust free pre-wired Used in Drawing Purpose Features : Saves space Easy to install with existing or new system Compact designs Low Installation Cost Maintenance Free Operation Noiseless No Piping, Expensive Valves and Fitting Low initial cost as compared to T.F. Heater & Steam Boiler Low running cost as Compared to TF Heater & Steam Boiler Thermal Efficiency of 90% and 2% Low Running Cost Compare Diesel to Gas 25% Net Applications : Tapes 4 Drying Laminations Space Heating Mineral Drying Textile Industry Rotogravure Printing Drying Tumbler Tobacco Drying Food Industries Plastics 4 Pulses & Corals Technical Specfications DESCRIPTION - UNIT JBC AH-25 JBC AH-50 JBC AH-100 HEAT OUTPUT - Kcal/Hr. 25000 50000 100000 ELECTRICAL LOAD - Kws 29 58 116 HOT AIR TEMPERATURE - oC 90/180 90/180 90/180 PROCESS AIR FLOW AT STP (1.2 KG/M3 AIR DENSITY) - M3/Hr. 1750/730 3500/1460 7000/2920 TEMPERATURE RISE - oC 50/150 50/150 50/150 FUEL CONSUMPTION HSD (DIESEL) - Kg/Hr. 2.75 5.5 11 ELECTRICAL SUPPLY - AC-3 PHASE, 4 WIRE ELECTRICAL LOAD - Kw 0.9 2.5 3.9 TEMPERATURE CONTROL - FULLY AUTOMATIC FEATHER TOUCH Dimensions Width mm 915 1050 1145 Length mm 1500 1500 1525 Height mm 2000 2300 2400

Model Unit HAG-10 HAG-20 HAG-40 Heat output Kcal/Hr. 1,00,000 2,00,000 4,00,000 Hot air output at 200oc M3/Hr 2,500 3,500 4,000 Maximum hot air temperature єC 250 250 250 Efficiency on gcv % 85 85 85 Fuel oil consumption LDO.Kg/Hr. 10.8 21.5 43.0 Connected electric load HP 6.5 9.0 11.5 Burner modulation ---- ON-OFF ON-OFF ON-OFF LDO GCV 10700 KCAL / KG. F.O. GCV 10200 KCAL / KG.

Engine CoolingAir (Radial) No. of Cyl.TwoFuelH.S. DieselTypeVertical ,4-stroke,compression ignitionSpeed1500 RPMStartingHandle start (Optional-Electrical)Fuel tank10 to20 litersA. C. GeneratorVoltage230/415 V PhaseSingle/ThreeFrequency50 Hz Regulation± 5 % Max. InsulationF Class

Air Cooled Double Cylinder Gensets, the most demanded of our company, which we are offering in worldwide countries. The huge client following of these Air Cooled Double Cylinder Gensets have supported us to establish ourselves as the most acknowledged manufacturer and exporter of Air Cooled Double Cylinder Genset.

A, pellet fired thermic fluid heater, specially designed for food, pharmaceutical and chemical industries for supply of process heat up to 320 0C. The units are supplied in ready to use condition, having four different models of 50,000 kcal/hr, 1,50,000 kcal/hr, 2,00,000 kcal/hr and 3,00,000 kcal/hr. Bigger units are supplied as special equipments to suit individual heat requirements of client. The unit consists of pellet burner, combustion chamber, coil type heat exchange, exhaust blower and control panel. Ideal for cooking in food processing industries, and for process heating in pharmaceutical, mineral, chemicals, pigment & dyes, paint & resins, ceramics.

Capacity:30,000K.Cal/hr TO 20, 00,000K.cal/hrFIRING : (OIL,GAS,ELECTRICAL & SOLID FIRE) BLOWER FAN:A centrifugal blower fan coupled with suitable motor of suitable capacity is coupled with inlet of hot air generator which push the required quantity of fresh air.BURNER:An imported single or two stage light oil monoblock burner with duplex filter mounted on hot air generator for smooth working.   AUTO CONTROLS / SAFETY Hot Air Temperature ControllerThe digital temperature indicator cum controller cut off the burner at preset hot air temperature. Stack Temperature ControllerThe Blind temperature controller cut off the burner at high stack temperature to prevent in case of cold air inlet blower failure to safe guard radiation chamber.Flame FailurePhotocell actuated audio visual alarm and automatic cut off. Burner InterlockThe burner is electrically interlocking, which allows burner to fire only after start of cold air blower fan. TYPICAL APPLICATION Units in higher capacity 10,00,000 kcal/hr and above available on request. Units with higher outlet air temperature also available on request. Units can be supplied to suit tailor made air flows and outlet pressure. Fuel consumption based on GCV of LDO-10700 & FO-10200. Chemical/Dyestuff Industries. Salt Drying Industries. Laundry. Paints-oven heating. Textile. Spray Dryer.

The Oil or Gas Fired Direct Fired Hot Air Generator we manufacture is ranging from 50,000 kcalhr to 15,00,000 kcalhr. The payback periods will be 2 to 10 months against oilgas fired or electrical hot air generators.

The AIRPACK series, horizontal multi pass direct fired FBC hot gas generator is designed with fuel flexibility in mind and can fire a range of use saw dust, rice husk, pulverizes coal, and any type of free flow fuel. It allows high and medium process temperatures without operating pressures. Fuel feeding systems is automatic threw screw feeders with A.C drive controlling. - High capacity heating system - Multi-fuel option – saw dust, rice husk, pulverizes coal, any type of free flow fuel - Rugged - requires very little maintenance - User-friendly systems. 

We are offering air cooled diesel generator. details vertical type4stroke cyclesingle actingtotally enclosedhigh speedcompression ignition diesel engine specifications modelgar-8power rating  (bhp)8power rating (kw) 5.9speed (rpm)1500bore x stoke (mm)95x110cubic cap. (cc)780no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj.pre.(kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.7nominal compression ratio17.5:1l.o.sump capacity (ltrs)3.75l .o. Consumption1.3 to 1.7% of sfcgovernor type/classtype-mechanical centrifugal    class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank  refilling time period ( hrs.). Engine running at full load7.2l.o. Systemg.p.weight bare/gross (kg)185/260overall dimension bare l x w x h mm 550x480x841(for aa models 575x520x845)packing l x w x h mm760x595x941(for aa models 785x635x950)starting systemhand start with cranking handlepower take offflywheel end, optional hand gear  at half / full speed drive