Air Separator Dealers

This Pre-cleaner is mainly designed to cater to pre-cleaning of agro seeds at modern processing plants. It can be placed before storage silo or even in plant operations. Salient Features: The Screen air Separator is of positive eccentric, four bearing design type. High speed, vibrating screen which ensures accurate, high quality separation at high capacity. The adjustable feed hopper regulates feed as desired and uniform distribution of material across width of screen. The outboard bearing isolation mount combined with advanced balancing systems make the frame vibration less, allowing the machine to be operated on any structure. The outboard bearing isolation mount combined with advanced balancing systems make the frame vibration less, allowing the machine to be operated on any structure. Quick access clamps permit easy access for interior cleaning and faster screen changing. Optional stainless steel construction permits the machine to be used for food, chemical and other specialized application like de-watering. Ball compartments incorporated into the screen support grid allow an optional ball cleaning system. Several models are available for capacity up to 100 TPH and above on wheat basis. Optional — Variable Speed drive facilitates to adjust optimum speed for best cleaning results     The Screen Separator may be equipped with various options. PRE SCALP UNIT is equipped with a short screen, somewhat coarser than the “top” scalp screen in the machine. This makes for scalping of the large over-size objects before the product enters the Screen. PRE-ASPIRATOR is used to remove hulls or dust and other light contaminants before the product enters the Screener, thus making the product more flow able at the start of the screening operation. POST ASPIRATOR is used when the finished product is to be the “plus” of the screen. This product is then discharged through the aspirator which removes dust or other light contaminants. FOUR DECK SCREEN SEPARATOR can be supplied for as high capacity as 100 TPH, with split-flow arrangement.SCALPER DRUM & SUTLI SEPARATOR can be provided at Feed inlet to remove bag Sutli jutes before feeding the material into Pre-Aspirator

Air oil separators remove compressor lubricant from the compressed air stream. The compressor lubricant is returned to the oil sump and the compressed air continues to the air receiver.  A typical oil separator reduces the lubricant entrained in the compressed air to 2-3 ppm. Under normal operating conditions an oil separators service life is 4,000 to 6,000 operating hours. Air/oil separators are also called oil separators and demisters.   Features Air flow capacities up to 3000 CFM/element 0.3-10 micron aerosol selectivity 99.9% removal efficiency 2250F operating temperature 50 PSIDP maximum differential pressures.

We are instrumental in offering a quality range of Air Compressor Moisture Separator. The offered range is utilized in different fronts like CNC machine shops, sugar mills, paper mills, rice mills, food processing units and cement factories. Along with this, the offered range is admired by the esteemed patrons, owing to its durable nature, abrasion resistant, corrosion resistant finish and longer service life. This range is customized as per the demands of the customers. Features: Corrosion resistance Easy usage Requires less maintenance

DESCRIPTION This is fuel/air separator. Fuel/air separator is working on free/force vortex flow principle.Environment friendly instrument.FEATURES :1.Min. maintenance2. Long durability.3.Increase productivity4. Envirnoment safety and fuel saver5. save operators time.TECH.SPECIFICATION : 1. Operating supply pressure- gravity.2.cylinder material: SS3163. Autonozzle valve: op.pr. 10bars4.floating NRV: operating pr.- gravityAPPLICATION1. Engine fuel filling and priming.2. Air separation from engine fuel line

To cater to the customers’ needs with excellence, we are engaged in offering Wall Mount Air Seed Separator. As a leading Manufacturer, Supplier and Exporter, we offer a premium quality range. It is made of top drawer raw material. Its accurate design, durability and high performance make it an irresistible proposition for the customers. For our esteemed customers, we make it available at easy on the pocket rates.   Wall Mount Air Seed Separator (Imported from Seed Tech of USA) Principle - Pressurized vacuum method. Capacity - 10-50kg per Hour (Depending on product bulk density). Air Control - Through electronic digital drive. Vibration Feeder - Electromagnetic. Portability - Portable through locking wheel. Product movement - Total visibility of all product movement. Two modes of operation - Permanent continuous feed or small lot batch separation (lab model only). Control - Responsive air and product control. Working - Environmental friendly. Power supply - Power Supply 220V, 1ph, 50Hz. Note : Higher capacities upto 1.8 ton/hr are also available on request.   Wall Mount Air Seed Separators (From Seedtech Systems-USA) Uses a pressurized vacuum method to provide high efficiency cleaning and precise upgrade separations of various agricultural and industrial products. Two modes of operation : permanent continuous feed or small lot batch separation (lab model only). Total visibility of all product movement. User friendly. Responsive air and product control. Safety flow relay switch prevents seed contamination. Calibration is fast and simple. Few moving parts. Environmentally clean. Fits into small areas. Portable and locking wheel vacuum system (WM2, WM2D & WM3). Capacity : 50 -125 lbs per Hour ( 23 - 56 kg/h). (Depending on product density).   INDOSAW is sole representative of Seedtech equipment in India.

We offer various filters such as Air Filter, Oil Filter, Fuel Filter, Lube Filter, Coolant Filter, Hydraulic Filter, High Pressure Filter, Hepa Filter, Air oil Separator, Filter Cart, Cabin Filter, Crank Case Ventilation, Steering Filter etc..  We are also authorised distributors for Mann+Hummel-Germany and Donaldson-USA.

This equipment is mainly used in industrial field to separates the materials in the combination of shape, size and density. It works by injecting the material stream to be sorted into a chamber which contains a column of rising air. Inside the separation chamber, air drag on the objects supplies an upward force which counteracts the force of gravity and lifts the material to be sorted up into the air. Due to the dependence of air drag on object size and shape, the objects in the moving air column are sorted vertically and can be separated in this manner. Air classifiers are commonly employed in industrial processes where a large volume of mixed materials with differing physical characteristics need to be separated quickly and efficiently. One such example is in recycling centers, where various types of metal paper plastics arrive mixed together and need to be sorted before further processing can take place.     Features:   Particles are reduced to finer and more uniform sizes. Use of cyclone separator leads to less dusting on output side. No dusting from feeding hopper because feeding is done under negative pressure. It runs at lower speed , hence it requires much less maintenance. They are easy to clean & wash. It is manually fed as normal practice & can be supplied with automatic feeding as well. It uses air classification which does not require screen. Hence, it is free from problems like conking, Printing & frequent replacement of screen do not arise.