Density Testing Equipment Dealers

Specially designed to study the packing down of powder beds of different powders fitted with Digital Counter facility, starts automatically on attaining the pre-set strokes provided without Graduated Glass Cylinders of 50/100 ml capacity.

Complete Fire Testing Laboratory Setup in India – Cone Calorimeter, FTIR, Smoke Density Machines | KDM Global KDM Global provides complete fire testing laboratory setup solutions in India, specializing in the supply and integration of advanced fire testing equipment including Cone Calorimeters (ISO 5660), Smoke Density Testers (ISO 5659-2), and FTIR Toxic Gas Analyzers (ASTM E662, EN 45545-2). Our turnkey labs are designed for BIS, ISO, EN, ASTM, and UL compliance—ensuring full readiness for industrial testing and regulatory certification. We serve the needs of railway equipment manufacturers, electrical OEMs, construction product suppliers, plastic and rubber processors, cable manufacturers, and government testing facilities across India and export markets. Turnkey Fire Testing Lab Setup Includes: Laboratory layout and infrastructure design Customized fire testing equipment supply Installation, calibration & commissioning Operator training and test method guidance Standards compliance audit support Ongoing technical service and AMC Major Equipment Supplied: Cone Calorimeter – ISO 5660 / ASTM E1354 compliant, measures heat release rate, smoke production, ignition time Smoke Density Tester – ISO 5659-2 compliant with optional radiant heat modes (25 & 50 kW/m²) FTIR Toxic Gas Analyzer – Measures CO, CO₂, HCl, HCN, NOx, SO₂ in real time; compliant with EN 45545-2 Annex C, ASTM E662, NF X70-100 UL 94 Flammability Test Apparatus Oxygen Index Tester (ISO 4589 / ASTM D2863) Glow Wire & Needle Flame Testers (IEC 60695) ISO 9239-1 Radiant Panel Tester Vertical & Horizontal Burning Testers for Plastics BS 476 Part 6 and 7 Flame Spread Equipment Industries Served: Railway Coach & Metro Component Manufacturers (EN 45545-2 HL1, HL2, HL3 compliance) Electrical Cable & Equipment Testing Labs (IS 10810, IEC 60332) Building Material Fire Test Labs (IS 16426, ISO 9239) Plastic, Rubber & Textile OEMs (UL 94, ISO 4589) Third-party Certification Agencies & Government Labs Why Choose KDM Global: Experienced fire testing equipment manufacturer and lab integrator BIS, ISO, ASTM, EN, and UL compliant machine supply Made-in-India machines with international quality and export readiness End-to-end execution: concept to commissioning Long-term support: AMC, spare parts, remote assistance, and calibration

It is designed to meet the requirements of USP Standards suitable for Method-I & Method -II.It can hold two cylinders, capacity : 50 ml and 250 ml. The mechanism provides simultaneously rotating and tapping motion to the cylinders for packing  the sample under test evently and uniformly together.   Features : Easy to Operate all the functions. Two Cylinders holder having easy mechanism to insert and take out. Simultaneous tapping and rotating assures an evenly packed surface. Calculation of test results will be displayed directly on the instrument panel by feeding the correct data. An audible alarm after the test is over The "THERMONIK" Bulk Density is specially designed to study the packing down of powder beds of different pharmaceuticals and chemicals powders, flakes, pellets, granules and other bulk substances. Bulk Density is an essential test required in the process of tablet manufacturing, Capsule filling and cosmetic manufacture. The Bulk density apparatus is equipped with Microcomputer Based 'Digital Display' System. The "TOUCH SWITCHES" are provided on the front panel of the apparatus for setting total number of strokes to the glass cylinders. Each stroke of the cylinder is displayed on the "Digital Display' window on the panel. The Up and down movement of the cylinders stop automatically at the Pre-set number and at the same time an audible Alarm sounds indicating the test is over. The advantage of Micro-Computer based Digital Display over the Old type model with the mechanical Timer is that "Digital Display" of total strokes gives accurate and exact number of Strokes given to the cylinders. The Touch Switches Can be set to any required strokes start right from minimum 1Stroke to 9999 strokes maximum. Specification : Display: 4 Digits LED Power Supply: 230 V/ AC 50 Hz. Dimension: 280 mm x 290 mm x 275 mm Weight: Net Wt 15 kgs. In the new and sophisticated model C-BD 100 Calculator is not required for test results. The results will be displayed directly on the instrument panel by feeding the correct data. Apparatus is suitable for working on 230 Volts, Single Phase A.C. 50Hz. Supplied with a pair of 50 ml glass cylinders and connecting cable. 100ml and 250ml Cylinders will be supplied at extra cost.

We manufacture, Supplier & Exporter of a flawless range of Density Basket. Density basket generally used for density tests on aggregates as per procedure lay down. In addition to this we manufacturer Density Basket as per the design and specification of our customers.

NAUGRALABS LABORATORY PRODUCT NAME: DENSITY BASKET FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-036005 Description and Specification for Lab Tenders Density Basket.  Salient Features Made of brass with stainless steel wire mesh 6.3mm size ruggedly constructed, approximately 20cm dia x 20cm high. Complete with handle. civil lab equipments manufacturers  Material Testing Lab equipment manufacturers,exporters and Material Testing Lab suppliers

Used for specific gravity and water absorption test of aggregate. The basket is used in conjunction with a suitable electronic balance, a specially designed robust frame to support the electronic balance and water tight container.

We have smoke density test apparatus available with us in competitive range. The smoke density test apparatus manufactured and supplied by us is made in accordance with the international standards. The smoke density test apparatus is used to measure the smoke density from burning or decomposition of plastics. Smoke density test apparatus ensures high safety and quality of electro- technical products. smoke density test apparatus is used to check electrical home appliancesindustrials luminariesmotorselectrical wiring accessories.

Portable Submersible Density meters DM-250 SERIES best suited for liquid density and temperature measurements directly in the storage or process tanks (up to 6 meters depth). No labor extensive and errors critical sampling required. Instead, the sensors of DM-250 SERIES can be submersed at any required level and record spot density and real temperature at that point directly in the liquid. The operation personal can get in minutes the average density in the tank and its density / temperature / level profile, for example, at every meter. Hundreds of measurements can be stored locally and future transferred to a PC or printer via built-in bluetooth connectivity. The DM series has robust design for heavy duty year round indoor or outdoor operation, even in severe climatic conditions at –40°C to +85°C (-40°F to +185°F). Backlighted LCD facilitates nighttime operation.

We are called upon as one of the major Liquid Density Meter Manufacturers and Suppliers from India. We manufacture Gas Density Meters incorporating latest technological procedures. The Density Meter offered by us is insensitive to high variation in level, temperatures or turbulence and plant vibration. The chief characteristics features that make Gas Density Meters highly demanded by our customers are: Easy operation in pressurized tanks Rigorous factory calibration & testing of transducer Hazardous area approvals Constant online density monitoring during process conditions Virtually maintenance-free system No moving parts We provide easy availability of density meter at the most affordable prices. Features Continuous, online density monitoring at process conditions Accurately measures density of liquids with viscosity up to 1200cSt Rigorous factory calibration and testing of the transducer Can operate in pressurized tanks Immersion in the tanks up to 30 meters No moving parts, virtually maintenance-free system We also can tune system specification for your specific requirements Hazardous area approvals Insensitive to liquid level, mix or turbulence Large offer of standard product configurations and installation available LEMIS process use the proven vibrating element technique which is widely accepted as the most accurate method of continuous online density measurement, LEMIS process engineers made new developments by the introducing unique proprietary design of resonant tube sensor allowing accurate measurement of liquid density. An integral high accuracy Pt-1000 probe continuously monitors liquid temperature allowing temperature compensation and future calculation of reference density, concentration or specific gravity. The technology proves high accuracy of measurement and long term calibration stability even in severs operation conditions. It is insensitive to plant vibration, high variation of temperatures, level, mix or turbulence. A choice of wetted parts materials: from stainless steel for general industrial use, Ni-Span-C for most demanding applications, and Hastelloy for applications where ultimate corrosion resistance is required. Documentation In-tank Density Meters DC-40 Series

Innovative Density Baskets are used for specific gravity and water absorption test of aggregate. The Density basket is used in conjunction with a suitable electronic balance, a specially designed robust frame to support the electronic balance and water tight container. The Density basket is of 20cm dia x 20cm high fitted with galvanized wire mesh of 6.3mm with handle for suspending it from the balance.

It shall be of seamless steel tube, 130 mm long and 100 mm internal diameter with a wall thickness of 3 mm, bevelled at one end,( as per section 2.1) Steel Dolley It shall be 25 mm high and 100 mm internal dia with a wall thickness of 7.5 mm with a lip to enable it to be fitted on top of the core cutter. Steel Rammer It shall have solid mild steel foot of 140 mm diameter and 75 mm height with a concentrically screwed 25 mm dia. Solid mild steel staff. The overall height of the rammer including the foot as well as the length of staff shall be approximately 900 mm.The foot and staff together shall weight approx, 9.0 Kg. Pallete Knife It shall have a blade of stainless steel approximately 200 mm long & 30 mm wide (Stainless steel spatula ). Scraper A steel strip about 300 mm long, 25 mm wid & 3 to 5 mm thick with one bevelled edge with suitable to level off ground.