AC Controllers Dealers

This product is designed to control two Air Conditioners(A.C. or AC) simultaneously. The industry standard AVR Micro-Controller is the heart of this system. Control over the ACs are performed according to some parameters like temperature, phase voltage, phase current, swapping time etc. User can set or view various parameters like current temperature, phase current, phase voltage, temperature set-point, high room temperature, swapping time, AC trip current, A.C. last trip reason etc. through a 16 x 2 character LCD panel and a status indication panel will help user quickly monitor the status of the ACs. An alarm system generates respective alarm for FMC if any error occurs in the operation. This system keeps the information of last AC trip reason and the overload current at which the Air Conditioner (A.C.) was last tripped in a nonvolatile memory for up to 100 years or the next trip occurs. This devise is fully compatible with VOLTAS SENSICOOL Air Conditioners (ACs) used in the shelter of a mobile tower.

A.C CONTROLLER is provided with independent power supply for each AC. Controller can work with any one or both power supplies.Under normal working condition at Power, depending on the Room Temperature & Set points IDFAN1 & ODFAN1 will be started after Fan Start up Delays. Compressor will be On after Cp1 Startup Delay & after Startup Delays of IDFAN2 , ODFAN2 .Cp2 will be started if required ( depending on room temperature ).  

Indotech introduces AC Protector designed for safety of Air conditioners. It monitors healthy/abnormal conditions Mains supply. This AC controller helps in reducing the power consumption and wear & tear of Air Conditioners. It has been also provided with advanced feature of GSM communication, which will give alarm status or all parameter status on cellphone (through SMS) as per user requirement. SALIENT FEATURES : Based on single chip Micro-Computer Logic High Accuracy and Stability Timer set for healthy condition check Indication of all faults like overvoltage, under voltage & over load Knob for setting OC GSM connectivity

Solar ac pump controller for the customers that are inclusive of the Solar DC Pumps which have a very robust make and they have been priced at very reasonable rates in the market and offer a long lasting functioning to the customers. These pumps are used for transferring various kinds of fluids and they offer a high performance to the customers and have been reasonably priced.

We are reckoned as one of the most effective manufacturer, exporter and supplier of Air Conditioner Controller in the domestic market. Air Conditioner Controller manufactured by us is equipped with optional GUI & different industrial communication protocols. A 3 ½ digit seven segment display is used to show the status of all monitored parameters. With the help of keypad, the function mode enables user to set OV, UV, OL, UL, and HP / LP & balance Cycle time. We provide AC Controllers for the combination of Single AC and Dual AC to 24 numbers of AC with all facilities.

The Curtis Model 1222 is an AC induction motor controller for ‘steer by wire’ electric power steering systems. In these systems, the steering motor functions as an actuator to change the angle of the vehicle’s steered wheel(s) and so change the direction of travel. The Model 1222 performs as the steering system controller, interpreting the steering command input and wheel position feedback, then driving the steering motor to move the steered wheel to the desired position.AC induction gearmotors. Intended applications are materials handling vehicles such as reach trucks, order pickers, stackers, ‘man up’ warehouse trucks and other similar industrial vehicles.

This Controller for Roof Mounted AC Package Unit of LHB Coaches and Double Decker Coaches is a Microcontroller based unit developed to control the sub-systems  of the RMPU automatically according to the Heating, Ventilation and Air-Conditioning (HVAC) algorithm to provide accurate control thus resulting in  comfort  to  passengers RDSO Specification: RDSO/PE/SPEC/AC/0139-2009 REV.1Approved by RDSO (Research Designs & Standards organization),  Ministry of Railways,Govt. of India.

The HT Solar Pump Controller is designed to run any Electric three phase submersible pumpmotor. That includes synchronous motors The HT Solar provides water in remote location by converting high voltage direct current (DC) from a solar panel into alternating current (AC) to run a standard AC Submersible motor.

We are offering solar ac pump controller. Special attraction of our solar ac water pumping system: dual mode operation: can be operating on electric power at night and solar power at day time. Inbuilt mppt tracking facility to get maximum power output from the solar array. Higher efficiency higher life cycle sensor less dry running protection higher temperature protection reverse polarity protection tank over flow protection over voltage protection under voltage protection over load protection high durable and reliable component of solar ac water pumping system solar panel: iec 61215 & iec 61730 certified solar panels with 35 year life. Ac motor + pump: high life cycle pump with high efficiency and better discharge. Solar ac pump controller: transformer less high efficient and micro controller based pump inverter. Module mounting structure: galvanized iron mounting structure with dual axis manualauto tracking facilities for long time operation in a day. Accessories: cable, connectors, pipe and other accessories. Note: for best competitive solution for your required solar water pumping system following details should be given. Pump setting depth (in metersfeet). Requirement of daily water (in littersgallon). Site location of solar water pumps installation. Advantages irrigation possible at remote locations environment friendly operations conventional grid electricity is not required highly reliable and durable ac high efficient motor + pump eco-friendly (zero noise pollution -zero co2 emission ) complete independence from grid connection for water supply 25 years power output warranty on the solar panels no fuel required almost no maintenance required provide consistent water solar pv arrayit consists of an array of solar panels connected in series and parallel combination to achieve the desired voltage and current necessary to drive the ac pump. The power rating of the solar array will be suitable to the design of the pump. Conventional ac 3 phase motor & pumpac pumps are conventional pumps that are currently in use across the world for various applications. Currently these pumps run on ac power from the grid (batter overall efficiency of the pumpset will lead to reduce the number of solar panel) solar ac pump controller with inbuilt mppt function (solar ac pump inverter)a transformer less inverter system, 415 vac 3-phase output voltage and vf control to manage pump starting condition (soft start). The equipment is micro controller based and operated with software for digital control of inverter parameters, fault finding diagnostics and digital io signalling. With the inbuilt mppt (maximum power point tracking) function, it regulates the output frequency according to irradiation in real time to achieve the maximum power. Adopting the proposed dynamic vi maximum power point tracking (mppt) control method, fast response and stable operation can be possible, better than the conventional methods, it can overcome the problems including poor tracking performance, unstable or even cause water hammer damaging when the irradiation on the array changes rapidly. Mounting structure galvanized iron dual axis manual tracking structure will ensure the long time hassle free operation. Optionally we will provide auto tracking or fix tilt tracking. Accessories hdpegi isi standard pipe for higher strength and easy installation with higher life expectation. Isi standard copper cable to ensure fire proof operation.