Temperature Scanner Dealers

Technical Specification: Input: Pt-100 J K Operating Temp: 0 oC to 50 oC Number or Channels: 8 Channels Power Supply: 230Vac +- 10% Channel Indication: WithNumber Resolutions: 0.11 oC Scan Time: 5 to 60 Sec [Adjustable] Indication: 4 Digits, 7 Seg. LED 12’’ Size Display Display Mode: Auto Mode Size: 96 X 96mm

Special Features : Scan Independent Channel Monitoring. Field Programmable Group Association. Password Protected Program Mode. Password Protected Software Calibration. In-Built Sensor Lineariser. Non Volatile User’s Program Retention. Audible Alarm. TC Cold Junction Compensation. RTD lead wire compensation

ibratherm offers Microprocessor based Temperature Process Scanner Model MSI-16-H and MSI-16-V, which is most suitable for continuous and accurate monitoring of temperature or process values at maximum 16 different locations in the same or different system. Additional useful features of common and individual high or low alarms make these scanners versatile for control and alarm applications. MSI-16 accepts thermocouples or RTD (Pt-100) sensors, as inputs. The temperature is indicated within the accuracy of ± 1 o C or ± 0.1o C of the specified input range, in spite of non-linear behavior of the standard thermocouple and RTD (Pt-100) sensors. The Linearized indication is achieved by software linearization technique. The models are available for 4, 8, 12, 16, 20,24, 28 and 32 channels

Display : 128 * 64 alphanumeric graphical display   : Temperature : RTDPt- 100 and PT- 1000 (0 to 4000C)   : Thermocouple 2 types (J type 8500C, K type oto 13000C Sensor Input : Linear Inputs : 4mA - 20mA , OmA - 20mA0-1 v, V, mv can support   : Humidity RH : o-IV, O- 3.3V (3 wire), 4mA - 20mA Alarm : Common Alarm for all channels Communication port : RS 485 to 232 (Pc communication) or Ethernet (Tamper proof data with 21cfr part 11 compliance software.) Print Features : Date wise data recoveryPage wise data recovery Printer Supported : EPSON LX - 300+ (Dot Matrix) with provided printer cable Scan time : 1 to 255 minutes interval time Memory Capacity : up to 3000 records Audio Indication : For Critical condition and Memory full condition Supply voltage : 110 / 230 VAC - 50/60 Hz Size : 96mm x 96mm x 65mm

PC/GSM/Printer connectivity with SCADA software makes our Universal Input Temperature Scanner one of its kinds. We are proficient Manufacturer and Supplier of Universal Input Temperature Scanner in Gujarat. The Universal Input Temperature Scanner offered has online test mode facility for each channel and no calibration is required for other input selection. Customers can purchase the Universal Input Temperature Scanner at industry leading rates.Details : Alarm output Hi/Lo, fail safe. All calibration /configuration can be done from front keys

Microcontroller based Temperature Scanner is designed for fast and accurate measurement and control of the Process Temperature. The Scanner monitors & displays the Process Temperature as well as does ON OFF Control according to the Programmed Set Point.

Applications   Large chemical, pharmaceutical, fertilizer, petrochemical, power and cement plants. Winding & bearing protection for large Motors and Generator Sets.     Features   Excellent accuracy and repeatability. Dual slope integrating technique with auto zero and auto polarity. Automatic cold junction and line resistance compensation. Minimum effects of temperature, humidity and power flactuations. Real Time Clock with RS232C or Centronics compatible printer port available optionally. Microprocessor based system with key board operation. Data storage in non-volatile RAM. Various relay output combinations available. Signal selection through solid state multiplexers.  

THERMOCOUPLES OR RTD, PT-100 -500C to 12000C. -500C TO 2000C, 4-8-12-16-32 channels.  Hold mode to freeze particular channel temperature.  Automatic scanning, variable SCAN rate, Over temperature alarm.  Independent SET temperature facility to every channel.  AUTO RESET to over temperature alarm.

Accept Input RTD, Thermocouple(J and K ) RTD/ -99.9 to 550.0 º C, J/ 0-600 º C, K/ 0-1250 º C Auto and Manual scanning Selectable Display Four for Temperature Two for Channel Channel Skip ,Offset -99.9 to 99.9 º C all channels Selection can be select feather touch keys Power supply 230 VAC mains operated Scan time 1-99 secs selectable Size 96X96mm , Channels available 2/4/6/8

We are offering process temperature controllers, temperature scanners. these controllers are mainly used for cooling as well as heating applications. Rtd is used to measure the temperature. applications include - cold rooms - process industry. - chilling plants - chemical plants 4 step temperature controller in 96 x 96 mm size -50 to + 50 c in 0.1 degree resolution