Electromagnetic Flow Meter Dealers in Thane

(15 products available)
  • Premium
    Flange Electromagnetic Flow Meter +4

    Flange Electromagnetic Flow Meter

    Get Price Quote

    • MOQ10 piece
    • Country of OriginIndia
    • Accuracy+/-0.5%(Standard) +/-0.3% or +/-0.2%(Optional)
    • MakeCBRO
    • ModelDIGIMAG250 Series
    • SizeDN3-DN3000mm
    • Nominal Pressure0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa...Max 42Mpa)
    • LinerPTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
    • ElectrodeSUS316L, Hastelloy B, Hastelloy C Titanium, Tantalum, Platinium-iridium
    • Structure TypeIntegral type, remote type, submersible type, ex-proof type
    • Ambient Temperature-20
    • Ambient Humidity5-100%RH(relative humidity)
    • Measuring RangeMax 15m/s
    • Conductivity>5us/cm
    • Protection ClassIp65(standard); Ip68(optional for Remote Type)
    • Process ConnectionFlange (standard), Wafer, Thread, Tri-clamp Etc (optional)
    • Output Signal4-20mA/Pulse
    • CommunicationRs485(standard), Hart(optional),Gprs/gsm (optional)
    • Power SupplyAc220v (can Be Used for Ac85-250v) Dc24v (can Be Used for Dc20-36v) Dc12v (optional), Battery Powere
    • Power Consumption<20W
    • AlarmUpper Limit Alarm / Lower Limit Alarm
    • Self-diagnosisEmpty Pipe Alarm, Exciting Alarm
    • Explosion ProofATEX
    • Electromagnetic flow meter is one of the most popular flow meters. Flange type electromagnetic flow meter has been used for more than 50 years worldwide. It is widely used for all conductive liquids in every industry, such as water, acid, alkali, milk, slurry etc. Since founded in 2005, CBRO has sold more than 600 thousand electromagnetic flow meters to provide the solutions for clients in different work conditions. Advantages :-  Electromagnetic Flow Meter Advantages and Disadvantages The main advantages of using electromagnetic flow meter is that it is with no moving parts, no pressure loss and require very less maintenance.   Flange type magnetic flow meter can be made large size range from DN3-DN3000mm and with bi-directional flow measurement. CBRO mag flow meters are with built-in self-diagnosis function and support data record / bluetooth function and various kinds of output signals.  Electromagnetic flow meter will be affected if there’s strong magnetic filed in the surrounding environment. Application :-  Flange Electromagnetic Flow Meter Installation Requirement Electromagnetic flow meter is widely used in water treatment, food industry, pharmaceutical, petrochemical, paper mill, chemical monitoring etc.  In the metallurgical industry, it is often used to control the flow of cooling water for continuous steel casting, continuous steel rolling, and steel-making electric furnaces;  In the field of water supply and drainage in public utilities, electromagnetic flow meters are often used for the transfer measurement of finished product water and raw water in water plants; In the pulp process of the paper industry, electromagnetic flow meters are involved in the measurement of the flow of grinding pulp, water, acid, and alkali;  In the coal industry, measuring coal washing and pipeline hydraulic conveying coal slurry. For food and beverage industries, it is used for beer and beverage filling measurement. For chemical and petrochemical industries, it is used to measure corrosive liquids, such as acids and alkalis etc Installation :-  Flange Electromagnetic Flow Meter Installation Requirement   In order to obtain a stable and accurate flow measurement, it is very important that the flow meter is installed correctly in the pipe system. Do not install the meter near equipment that produces electrical interference such as electric motors, transformers, variable frequency, power cables etc. Avoid locations with pipe vibrations for example pumps. Do not install the meter close to pipeline valves, fittings or impediments which can cause flow disturbances. Place the meter where there is enough access for installation and maintenance tasks.
    ...more
    www
  • Electromagnetic Flowmeter

    Electromagnetic Flowmeter

    Get Price Quote

    The electromagnetic flow meter accurately measures the flow rate of any conducting liquid or slurry that is flowing in closed pipes. It is obstruction less and hence offers no pressure drop in the process. Absence of moving parts ensures that there is no need for maintenance. The performance of the instrument is not affected by the properties of the material such as corrosiveness, viscosity, density, acidity and alkalinity. It can measure the flow of liquids, pastes and slurries in water, wastewater. Suitable for chemical, fertilizer, paper, dairy, sugar, food and beverage industries.  
    ...more
  • Electromagnetic Flow Meter +2

    Electromagnetic Flow Meter

    Get Price Quote

    • MOQ1 piece
    • Brand NameBurak Metering
    • MaterialStainless Steel
    • Power24 VDC, 2 AMP & 230 VAC
    • UsageIndustrial
    • Operating Temperature-20 ... +120°C for PTFE lining/ -20 ... +60°C for Neoprene/EPDM lining
    • Packaging TypeWooden Box
    • Line SizeAs per requirement
    • SpecialitiesAccuracy
    • Number Of FlowerElectromagnetic Flow meter
    • Accuracy± 0.5% of reading
    • Country of OriginIndia
    • DisplayDigital
    • Analog Output4-20 mA, non-HART
    • The Electromagnetic flow meter measures the flow of conductive liquids like water, wastewater, chemicals, etc. The integrated display offers convenient on-the-spot monitoring, simplifying data acquisition and analysis for various industrial applications.   Features    Large Graphical LCD display  4-20 mA Non-HART Standard  4-20mA HART (optional)  RS485-Modbus for network communication  Pulse output  Online Monitoring Device (IoT)  Empty Pipe Detection  Chemically resistant liner materials  Bi-Direction flow measurement  Field programmable for flexibility in configuration   Benefits    Ultrafast response time  High accuracy  Neligible pressure drop  No moving parts  Lining protectors available for harsh, chemically corrosive, and abrasive fluids  Fast respond to changing flow  Easy to Install  Performance is unaffected by Density, Viscosity, Temperature & Pressure  Available in wide variety of sizes  Can handle slurries and heavy particulates
    ...more
  • Electromagnetic Flow Meters

    Electromagnetic Flow Meters

    Get Price Quote

    Under volumetric flow measurement, electro-magnetic flow meter are used for fluid flow measurement of any conducting liquid like water or slurry that is flowing in closed pipes. Unlike turbine flow meters, it is obstruction less and hence no drop in pressure is observed in the process line. Since there are no moving parts hence maintenance is very less.
    ...more
  • Electromagnetic Flow Meter

    Electromagnetic Flow Meter

    Get Price Quote

    • FinishingPolished
    • Driven TypeElectric
    • UsageIndustrial
  • Electromagnetic Flow Meter

    Electromagnetic Flow Meter

    Get Price Quote

    • Accuracy+/-0.5% of Actual Flow Rate (+/- 0.3%, +/-0.2% on request)
    • Repeatability+/- 0.2% F.S
    • CERTIFICATINCE CERTIFIED
    • METERINGTUBES.S 304
    • ELECTRODES.S 316
    • FLANGEC.S.
    • LININGPTFE
    • END CONNECTIONASA150#Flanged as per B 16.5.
    • MOUNTINGInline
    • MIN CONDUCTIVITY10 uS/cm
    • PRESSURERATING10 Bar ( Higher Pressuer Available)
    • MAINSPOWER230 V AC 50Hz / 24 V DC
    • ENCLOSURE M.O.C.Cast Aluminum IP65Signal Amplifier Box
    • CABLE ENTRYSize 220 X 120 X 85 mm with glass window.
    • FLOW UNITPG-9 / PG-11
    • EMPTY PIPEDETECTIONSelectable.
    • LOW CUTTOFF  
    • OutputAvailable
    • COMMUNICATION4 – 20 Ma
    • DIRECTIONRS 485 MODBUS
    • PROGRAMMINGSuitable for Bi- Directional
    • TERMINALSThrough Key/ Keypad on front facia.
    • SIGNAL CONVERTORShock – Hazard – Protected screwless terminals.
    • INTERCHANGE ABILITY :Fully interchangeable with all sizes of flow sensors.Integral / Remote (with 3 meterCable)
    • POWERFAILURE MODE Provision of RAM/PROM to store parameter entered and measured flow dataduring power failure
    • MAX PROCESS TEMP.0-60 deg C Normally ( Higher Temperature Available)
    ...more
  • Electromagnetic Flow Meter

    Electromagnetic Flow Meter

    Get Price Quote

    • DisplayDigital
    • Accuracy+ / - 1% OF SPAN
    • Brand NameScientomech
    • Application MediaAny Liquid
    • Power Supply230 VAC
    • Flange Size15 mm to 300 mm
    • Electronics EnclosureIP67
    • Flow Range0.3 to 10 m/s
    • We are the leading manufacturers, exporters and supplier of this products.
  • Electromagnetic Flow Meter

    Electromagnetic Flow Meter

    25,000 - 150,000 / piece

    • MOQ1 piece
    • Number Of FlowerElectromagnetic
    • MaterialMS. SS304. Ss316
    • Size15NB to 600NB
    • Warranty12 months
  • Electromagnetic Flow Meter +6

    Electromagnetic Flow Meter

    90,000 - 120,000 / Piece

    • End ConnectionsFlanged Ends, Tri-Clover Ends, SMS type or, Wafer type
    • Meter SizesDN 10 up to DN 2000
    • Outer Body MaterialsMS or, SS
    • Liner MaterialsSoft or, Hard Rubber, PTFE, PFA or, Neoprene
    • Electrode MaterialHastelloy C or, B, Titanium
    • Velocity suitability0.5 up to 10 M/Sec.
    •  We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm.These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc.Electromagnetic Flow Meters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Meters, Sandwich type Electromagnetic Flow Meters and Insertion type Electromagnetic Flow Meters.Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safty in use, ease in installation and ease in maintenance.
    ...more
  • Electromagnetic Flowmeter

    Electromagnetic Flowmeter

    Get Price Quote

    Electromagnetic flow meter is ideal for conductive liquids such as Raw Water, Chilled water, effluents, Potable water etc. Using time proven electromagnetic flow metering principle, the meter achieves a flow meter for pipes from 15mm to 600mm. Since there are no moving parts, the flow meter gives years of maintenance free service. Flow-head can be supplied in Teflon lining or Hard Rubber lining is available with all the features required in a field mounted
    ...more
  • Electromagnetic Flow Meter

    Electromagnetic Flow Meter

    Get Price Quote

    We offer Electromagnetic Type Flow Meter. Service: all type of conductive liquids. (minimum conductivity 5 µs/cm)working principle : faraday's law of electromagnetic induction. range : 5 to 10000 lpmpipeline size : 10 mm up to 350 mm in full bore type and insertion type for line size above 350 mmaccuracy : 0.5% of the reading in case of full bore type and 2% of the reading in case of insertion type.min. Velocity : 0.5 meter per secondflow indication : digitaltransmitter unit : integral or remote mounted indicator unit : integral or panel mountedenclosure : water proof (ip 65) or flameproof max. Working temperature : 120 degree cmax. Working pressure : 40 bar in full bore type and 15 bar in insertion type.power supply : 230 v ac)applications : indication of flow rate passing through the pipeline.
    ...more
  • Electromagnetic Flow Meter

    Electromagnetic Flow Meter

    Get Price Quote

    Coil Housing SS-304 M.O.C. Of flow tube SS-304 M.O.C. Of flange M.S. (std) SS304 & SS316 (Optional) Flange connection ASA 150# Flanged as per B 16.5. Electrode SS 316 SS 316L Hasteloy C Titanium (other on request) Electrode type Round head electrodes (bullet nose) Liner PTFE PFA (other on request) Electrical conductivity 10 Scm (5 Scm for many liquids) Accuracy + 0.5- 0.2 % of F.S. Operating pressure 10Kgcm2 (more on request) Operating temp. 80 oC (More on request) upto 250 oC. Mains voltage 230 Vac, 50 Hz 440 Vac, 50Hz (Optional) 24 V DC Battery Operated (Optional) Power consumption Up to 20 VA Input Impedance 1000 M Ohms Type Pulsed DC excitation Enclosure Cast aluminium Ip65 flammeproof CMRI IIA IIB signal Amplifier Box Enclosure Painting Ip 67 Corrosive resistant two component coating (Ip 68 optional) Signal convertor Head mount or remote. Display 16 x 2 LCD Computer interface RS-485RS 232 (Optional) Flow unit Selectable Cable Entry 2 off, suitable for 8mm diameter cable Test pressure 1.5 x Rated pressure Output 4-20 mAfreq. pulse (Optional Empty pipe detection Available Low cutt off Available Batching Available (Optional) Damping Available (Optional) Direction Suitable for bi directional Programming Through Key Keypad on front facia. Shock hazard protected screw less terminals. Interchange ability Fully interchangeable with all sizes of flow sensors. Power failure mode Provision of RAMPROM to store parameter entered and measured flow data during power failure
    ...more
  • Electromagnetic Flow Meter

    Electromagnetic Flow Meter

    Get Price Quote

    Water Leak Detector, Acoustic Water Leak Detector, Flow Meter
  • Electromagnetic Flow Meter

    Electromagnetic Flow Meter

    Get Price Quote

    Data Loggers, Directory Listing Services, Level Switches, Level Transmitter
  • Electro Magnetic Flow Meter

    Electro Magnetic Flow Meter

    Get Price Quote

    Electro Magnetic Flow Meter, Turbine Flow Meter, Flow Meter, Level Indicato
Filter by Locality
top