Heat Exchangers Dealers in Thane

We are instrumental in offering a wide range of Shell And Tube Heat Exchanger to our clients. in synchronization with the set industry standards, our provided heat exchanger is preciselymanufactured using high grade raw material andlatest technology. wing to its rust resistance and low maintenance features, this heat exchanger is widelyappreciated by our precious clients. oreover, to ensure the best quality, the offered heat exchanger is tested by our quality experts on various quality parameters.  Features : Sturdy built, Low maintenance, Rust resistance, Smooth operation, Perfect finish, High Thermel Efficency.

Connections : Standardized sizes for easy assembly. Additional thread and surface protection for clean installation. Tubesheet : Stainless steel straight or U-tubes in a carbon steel shell. Available in a variety of diameters and lengths, Shell and tube heat exchanger transfer large amounts of heat at a relatively lower cost. Gaskets : High quality compressed fibres (reusable). Head: Standard cast-iron or steel head for heavy duty services (also available as a spare part). Mounting : Saddles attached with standard units for quick & easy mounting. Baffles : Punched baffles with minimum clearances between tubes assures correct fluid flow and minimized bypass. Shell : Welded shell protected with high quality paint for corrosion resistance. Tube Bundle : Stainless steel tubes allow for strong, durable performance over a wide range of applications. Unique tube bundle layout minimizes buildup problems at the edges and optimizes media flow in the unit.

. We made our products with best quality raw material and high tech process. Our Condensers are available at market leading prices and are in compliance with set industry norms & standard. We provide best quality raw material and superior technology. We offer this Condensers to our valued customer at reasonable rates.

Air Preheaters offered by us are an essential part of the boiler air and gas systems. We are an eminent Manufacturer and Supplier of Air Preheaters. Known for their reliable performance and high efficiency, our Air Preheaters improve boiler efficiency. Stringent quality-tests ensure that only defect-free Preheaters reach the buyers. We are capable of delivering bulk orders of the Preheaters within the allocated time.

The High Grade Heat Exchanger that We Provide Perfectly Works in Both the Conditions- Be It Direct Contact of Media or Media Separated By a Solid Wall. the Heat Exchanger that We Offer is Constructed with Great Care and Renders High Performance Along with Longer Service Life.

All TEMA type of Heat Exchangers can be fabricated. CNC drilling machines are used for drilling tubesheets of 300mm & more thickness We are licensee of Helixchanger© – Technology of Lummus Heat Transfer -USA Specialized Heat Exchangers such as Superheaters, Hairpins , Exchangers with  Finned tubes , UOP - High flux tubes  , Bayonet Heat Exchangers have been manufactured by us. Metallurgies-          Clad Steel (Ferrous / Non Ferrous)-          Alloy steel (1¼ Cr ½Mo, 2½Cr 1Mo, 5Cr ½Mo, 9 Cr ½ Mo)-          Stainless Steel (Ferritic , Austentic , Duplex)-          Carbon Steel including requirement for HIC)-          Nickel Alloys (Monel/ Inconel ..) / Copper Alloys (Al Ni Bronze, Cu         Ni, Brass …)

A heat exchanger is a device manufactured for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in Refrigeration, Air Conditioning, Food

Air Cooled Heat exchangers are used for cooling of Water, Oil or other fluids using air as the cooling media. This can replace the conventional cooling towers, which uses water as the cooling media. As this heat exchanger use the atmospheric air, there is no consumption of water. This type of Coolers is ideal for areas where water is costly and not available in large quantity for the Industrial use.

We are offering mild steel shell & tube heat exchanger is an excellent product that is used to transfer heat to boil water. They generally find applications in thermal, chemical and pharmaceutical industry. Our products are manufactured under strictly controlled environment so as to avoid impurity in the final product. They are tested to with stand high temperature and pressure, before being certified. the products manufactured by us offer the following advantages: high thermal coefficient corrosion resistant high grade finish prolonged functional life durable.

We design and manufacture Air Cooled Heat Exchanegrs for cooling of process fluid like water, Thermic fluid oil etc., Ambient air is used for Cooling. This equipments are most ideal where water is not available for cooling. Cooling bundles are made out of Carbon steel or stainless steel tubes with extruded Aluminium fins. Dynamically and Stattically balance impellors are used in fans driven by TEFC motors.

We are offering energy recovery ventilator. devatech energy recovery ventilators are the systems based on the high transfer rate of cooling from the exhaust air to the incoming supply air. A number of parts like rotor wheels, plate type heat exchanger or counter flow heat exchanger are used in these ventilators. Additionally, the aluminum matrix is the key media used to recover the cooling or heating. Devatech energy recovery ventilators are capable of recovering sensible and latent energy from the stale exhaust air and transferring it to the fresh outside air. Our energy recovery is equipped with energy recovery wheels. The rotating wheel transfers the sensible and latent energy between the counter flowing exhaust and supply air and in the process preconditions the fresh air, increasing the air conditioning tonnage ultimately being economical, saving capital and operating costs. Desiccant coated energy recovery wheel slowly rotates between its two sections. In one section, the stale, conditioned air is passed through the wheel, and exhausted to the atmosphere .the wheel absorbs sensible and latent energy from the conditioned air, which is used to pre-condition the incoming fresh air in the other section, during the second half of its rotation cycle. Thus, you can have more fresh air at lower energy costs inside your conditioned space. with modern houses being highly insulated and draught proofed, it is essential to ensure that the costly heat in the house is kept inside. In many houses the heat is allowed to leak out through trickle vents, wall vents, etc., without the heat being captured and reused in the house. simply making the house airtight is not an acceptable solution. This leads to a very unhealthy indoor climate, with possible high levels of radon, allergens, moisture and carbon dioxide. By using a ventilation energy recovery unit from erv, we can help you ensure that your house is warm, safe, energy efficient and comfortable for you and your family. Devatech`s system will remove stale dirty air, and replace it with fresh, clean, filtered air, while recovering the valuable heat from the outgoing air and efficiently transferring it to the incoming air. in the ventilation unit a rotating wheel is used to warm up the cold outside air before it is taken inside the building. The heat exchanger absorbs heat from the exhaust air and with this warms up the cold outside air. The wheel has to rotate between these two airflows to achieve heat transfer. The rotary heat exchanger is the most efficient and cost saving way of recovering energy during winter. In the warm weather cold is recovered with the same high efficiency. the smallest standard rotating wheel produced by erv, has a heat transfer surface of 55 m² which gives an excellent recovery efficiency of 75 - 85 % depending on the supply and exhaust air volumes. the rotating wheel can operate in lower outside air temperatures without freezing than other types of heat exchangers. With a rotating heat exchanger we are able to balance the humidity inside the house in the winter on a healthy level between 35 -50 %, because the wheel also recovers some of the humidity on the supply and exhaust air volumes. all erv ventilation units are constructed for use throughout the year. Additional heating is seldom needed because the efficiency is as high as 85 %. Along with providing good indoor air quality, erv units with rotary heat exchanger save more energy than most other heat recovery units thanks to the high through the year efficiency. why choose our energy recovery ventilator? precisely designedlow operating costrequires less maintenancelong lasting performance.

We are offering tube heat exchanger, our shell and tube heat exchanger are found in various material of construction (moc) . Like 1: full ss 2: ms/ss as required by the customers.

The functionality of a cross flow plate heat exchanger is to exchange or transfer thermal energy among the airstreams in air-conditioning unit. It is generally utilized in ventilation or cooling system, where heat need to transferred from one airstream to another. It contains thin metal panel generally aluminum in which the energy is exchanged through panels. It doesn’t allow humidity to enter in airstream, hence avoids the risk of short-circuiting. Traditionally, A Cross flow plate heat exchanger is square & cross –section in shape having thermal efficiency up to 50-60%. It is widely used in various applications due to its less cost. But sometimes it is required to have more thermal efficiency up to 75-80%, so dual cross-flow heat exchanger will be more useful. These kinds of Heat exchangers are widely used in may heat recovery systems like in large hospitals, food industries, green building, Clean rooms ,Bar, Pubs, Mall, Commercial Places, Cold storage etc. Applications: » Heat recovery from exhaust air for space heating for factories, offices and warehouses. » Pre-heating/cooling of incoming air for air-conditioning units using exhaust warm/cool air. » De-humidification of air streams. » Electrical equipment cooling.

KILBURN has decades of experience in design, manufacture & commissioning of the entire range of heat transfer equipment and systems. These equipment include Shell & Tube Heat Exchangers, Finned Tube Heaters & Coolers, Incinerators, and Direct Indirect fired Heaters in various sizes, capacities, pressures, temperatures and materials of construction. These systems are designed for specific requirements to suit individual applications. Air Heaters for KILBURN Drying Systems are specially designed to match the drying requirements.

Option 1: A heat-exchanger system consisting of a bundle of U tubes (hairpin tubes) surrounded by a shell (outer vessel); one fluid flows through the tubes, and the other fluid flows through the shell, around the tubes. Multitherm can duplicate any existing bundle to include dimensions, materials and performance. we can build “U” tube bundles, straight tube “floating” tube bundles, or we can retube fixed tube sheet heat exchangers when the bundles is not removable. Multitherm is not locked into any one material. Most bundles tend to be build with copper tubes and steel tube sheets. Option 2: The U-tube head (U) is a very simple design requiring a bundle of U tubes, only one tube sheet, no expansion joints, and no rear-end head at all, allowing easy removal of the bundle. The thermal stress problem is eliminated because each tube is free to expand/contract independently. One disadvantage is, individual tube replacement is not possible except in the outer rows, and an even number of tube passes is required. Some tubes are lost in the center due to HEAT EXCHANGERS 17.7 tube bend limit, and tube side mechanical cleaning of the bends is difficult. Flow-induced vibration could be a problem for tubes in the outermost row. It is the lowest-cost design because there is no need for the second tube sheet.