Laboratory Centrifuges Dealers in Thane

Disc Finishers have a high speed rotating disc mechanism, offering high energy action. This provide performance levels upto 10 to 30 times higher than conventional vibratory machines. Gala offers standard as well as completely automated & integrated solutions for disc finishing. This system includes auto component weighing, loading , unloading & on line washing & drying.

• Material: Stainless Steel
• Shape: Round
• Centrifugal Separator Usage: Gold separating
• Recovery rate: >97%
• Max Speed: 500 -2000rpm
• Time Range: 1s - 99min59s
• Noise: ≤45 dB

• Brand Name: Labtop
• Type: Mini Centrifuge
• Country of Origin: Mumbai
• white: green
• Speed: Upto 12000 rpm

We are offering Mini Centrifuge. Speed upto 12000 rpm Starts and Stops in seconds Clear cover allows user to view rotor status

• Application: Laboratory
• Power: 250-500Wt
• Automatic Grade: Automatic
• Condition: New
• Color: White
• Brand Name: Haico

Haico conforms to the following ASTM standards, ASTM D91 - ASTM D96 - ASTM D893 - ASTM D1796 - ASTM D2273 - ASTM D2709 - ASTM D2711 - ASTM D4007 - ASTM D5546 - API 2542 - API 2548 - BS 4385 - ISO 3734 - ISO 9030 - IP 75 - IP 359 - NFMO 7020. This Oil Test Centrifuge is fully programmable allowing automatic configuration to the specified oil test parameters.This centrifuge is specially designed for water and sediment determination, as well as characterization of used oils and petrol features like demulsibility and precipitation. Available are accessories for 6” and 8” cone-shaped centrifuge tubes, pear-shaped centrifuge tubes.Heating- Preheating program with rotor spinning and temperature is selectable by operator.- Temperature regulation from ambient +5°C up to +80°C (176°F).- Scale Celsius or Fahrenheit.- Temperature sensor in the chamber.User friendliness- TFT touch screen, easy to read and values selection.- Informative display about the progress of stages of centrifugation.- Rotor and adapters list in memory.- Real values on screen of RCF based on accessories configuration.- Start delay - Unbalancing locations system (ULS)- Timer count up/down, for 0 or at “set RPM/RCF” for test reproducibility. From 1 minute to 99 hours, in 1 second steps, and hold position.- Up to 175 acceleration ramps and up to 175 breaking ramps.- Automatic rotor recognition.- Lid latch lock.- Microprocessor controlled.- Induction motor, maintenance free- Up to 4000 RPM/ 2.425 RCF (9 RPM/9 xg steps) Safety- Isolation for reducing the heat loss.- Lid locking and holding.- Imbalance switch-off.- Manual overriding and lid dropping protection.- Chamber of centrifugation made from stainless steel.- Several Programs to keep the operator trouble free about varius Tests.- Guard ring between the chamber of centrifugation and the housing.   Specifications: Max speed 4000rpm Max RCF 2498xg Max volume 4x100ml Noise ≤60dBA Timer 1～99min Net weight 67KG Dimension(LxWxH)mm 685×500×405mm Temperature Range Room temperature:+10~80℃ Speed accuracy ±20rpm Package Wooden box

• Country of Origin: Made in India
• Power: 1.5 HP
• Volume of Disc: 18 Kg
• Processing Volume: 9 Kg
• Rotating Speed: 400 RPM Max
• Thickness Of Work Piece: 0.5 mm
• Batch System: Triple Batch System
• Automation Grade: Fully-automatic
• Usage/Application: Industrial
• Model Name/Number: FTD 18
• Brand: Fin Tech

SUPER FIN centrifugal finishing is a unique high energy mass finishing process. In this machine four barrels are mounted on the periphery of the roating turret.  As turret roates along its axis at high speed, centrifugal force is generated inside the barrels. These barrels are also rotated along its own axis (straight axis or skew axis) in opposite direction. Each barrel contains media, finishing compound, water and parts to be finished.  Due to rotation of turret & barrel, media inside barrel rub against the parts under pressure. The high pressure sliding / rubbing action of media performs the surface finishing of the parts and reduces finishing time to just a few minutes from many hours. SUPER FIN is ideally suited for high quality finishing. It can process even fragile & delicate parts without any distortion.

we offer Bottom Discharge Type Four Point Suspended Centrifuge. Features: Vapour Tight Arrangement Reverse Current Braking Variable Speed Drive Dynamic braking cGMP Construction Vibration Monitoring System Fluid Coupling Cake Sensor Facility Zero Speed Inter locking High Speed Drive Mounting on inertia plate with Visco dampers

The process of filtration is similar to other types of centrifuges, the difference being in the method of unloading the solids. The scraper cuts the solid cake while the basket is rotating at a slow speed. The solids are discharged through openings provided in the Basket bottom and Bottom Base / Inertia Plate.  

• Weight: LBC-12-500 kg /LBC-6 -250 kg
• Minimum Order Quantity: 1 Unit

Our organization is well acknowledged for offering Blood Bank Refrigerated Centrifuge that is used for centrifuging larger volume centrifuge tubes, bottles, blood bags, etc. Well built, our Blood Bank Refrigerated Centrifuge is fabricated using high grade steel in numerous specifications. It is epoxy powder coated with stainless steel table top ensuring high durability. Our Blood Bank Refrigerated Centrifuge is well equipped with advanced features that make it easy to operate and maintain.

• Weight: 1000KG
• Country of Origin: Made in India
• Power: 5.5 HP
• Brand: Vibro sepro system
• Automation Grade: Semi-automatic
• Material: Mild steel
• Usage/Application: Industrial
• Machine Capacity: 350 Litre

We offer Micro Centrifuges. Salient Features: • Microprocessor controlled with last run memory feature • Large back-lit LCD display shows multiple parameters at a time • Brushless DC motor - maintenance free, delivers better power to weight ratio and fit for extended runs • Imbalance detection with auto cut off • Better airflow design ensures lesser heat generation and less noise • Lid lock safety – Lid opens automatically on run completion • Intuitive simple interface for quick and convenient setting • 1 to 999 Mins countdown timer with Min sec display • One touch Short - Spin operation • Extremely compact footprint saves valuable bench space - suitable for use in fume hoods or cold rooms • Unique airflow design - ensures lesser heat generation and lesser noise • Rotor, inner centrifuge lid and lid latch are made of metal for maximum operational safety • Soft – touch lid closure for ergonomic lid locking • Settable RPMRCF

Accurate Scientific Instruments is known as a dependable Manufacturer, Exporter, and Supplier of Blood Bank Centrifuge. We bring forth Model No. AIBC-10 of Blood Bank Centrifuge for the customers. Model No. : AIBC-10 Capacity : 6 Blood Bags, 8 Blood Bags, 12 Blood BagsFeatures : Fully Automatic Display : Graphic LCD Display of set and process parameters. Motor Drive : Brush less induction motor VF drive Memory : Programmable memory with tamper proof facility. Programmable Acceleration and Deceleration time range from 240 seconds to 480 seconds Lid Lock : Safety lid lock with Indicator. Rotor : Swing out wind shield rotor with Metal Buckets, suitable adapters for 6 Blood Bags, 8 Blood Bags, 12 Blood Bags,Holder : Removable plastic cups to hold single/double blood bags with stainless steel clips.Cooling unit : Kirloskar brand ISI mark compressor, is CFC free. Condenser & Cooling units are made of copper tube & aluminum finns. Temperature Range : -20 deg C to 30 deg C. LC: 1 deg C, Micro processor controlled rotor temperature within 1deg C, regardless of the centrifuge speed. Programmable Time : 0-99 Minutes with minimum resolution of 1minute. Technical Specifications : Operation : Programmable typeChamber : Stainless steel , easy to clean, corrosion resistant with provision of both drain and condensed water outlet. Motor imbalance detection : Automatic shut down of rotor movement with unbalance indication. Power supply : 220/240 volts, 50 Hz Single Phase AC supply. Suitability : The equipment is suitable for operation from 0 deg to 40 deg C at 90 % RH Internal Electronic is suited for this ambient Condition.Safety : Electronic safety device incorporated that will give audiovisual alarm in case of power failure. Voltage stabilizer incorporated with Low and High voltage protector. RCF : Continues read out of working RPM & RCF value.Counter Balance : Counter balance & fall safe Lid with gas hinges.RPM : Max 4200.Maximum speed : Microprocessor controlled rotor speed to within ±10 rpm of set value. Acceleration/deceleration profiles incorporated.

Centrifugal finishing machines are specially designed and, develoed for tiny mini or small part or those required heavy duburring and mirror, polishing, Total Barrel Capacity (LIT) 50 L x 4, WxDxH(mm) 2000 x 2000 x 2400.

• Dimensions: 247 x 275 x 330 mm ( H x W x D )
• Capacity: 6 x 50 ml max
• Speed Range: 1800 rpm
• RCF Max: 23907 xg

• Country of Origin: Made in India
• Power: 25 HP
• Steel Media Weight: 350x500 kg
• Dimension: 2000x2000x2400 mm
• Material: Mild Steel
• Usage/Application: Industrial
• Model Name/Number: CFM 200
• Brand: U Turn Concepts

Labtop micro controller based High Speed Refrigerated Centrifuge LRC — 2013 is useful for centrifugation of temperature sensitive materials and widely used in research centres, bio technology, soil testing laboratories also used in medical laboratories and educational Institutes. This centrifuge has maintenance free brushless motor, large graphic display, motorised door lock, timer and programmable acceleration and deceleration. Motorised safety door interlock on the centrifuge ensures that the rotor does not run with door open while the cover cannot be opened unless rotor comes to complete stop. The heavy duty steel fabricated centrifuge is provided with stainless steel inner chamber and effectively insulated to provide sufficient cooling of the chamber. CFC free refrigeration system with pre-cooling facility, maintenance free brushless induction motor with low level of vibration and noise with smooth acceleration and deceleration.   Special Features Maintenance free brushless motor Motorised safety door lock Imbalance detector ABS moulded font panel 1Large blue graphic display User friendly programs Display of rpm, rcf, time in a single screen Motorised safety door interlock on the centrifuge ensures that the rotor does not run with door open while the cover cannot be opened unless rotor comes to complete stop.The heavy duty steel fabricated centrifuge is provided with stainless steel inner chamber and effectively insulated to provide sufficient cooling of the chamber. CFC free refrigeration system with pre-cooling facility, maintenance free brushless induction motor with low level of vibration and noise with smooth acceleration and deceleration.   Note : Catalogue number LAO- 20 is a non refrigerated version of LRC-20R and other features are same as below :

• Brand Name: Remi
• Voltage: 220 - 240 V
• Temperature Range: 0 DegreeC to +40 DegreeC
• Temperature range: 5 to 40 deg C
• Display: LCD Display
• Colour: Yellow, White

All reconditioned machines are guaranteed for twelve months of operation. We have a strict procedure that's why we can guarantee our products. Application for the disk centrifuge can be similar to decanter but will typically suitable fluid having lower solids concentration and often finer in particles. It is a solid bowl design containing a set of stacked disks.

• Speed: 2000 - 3500 rpm
• Voltage: 220 V
• Frequency: 50 Hz
• Is It Portable: Portable

entrifugal finishing is a unique high energy mass finishing process. In this machine four barrels are mounted on the periphery of the roating turret, As turret roates along its axis at high speed, centrifugal force is generated inside the barrels. These barrels are also rotated along its own axis (straight axis or skew axis) in opposite direction, Due to rotation of turret & barrel, media inside barrel rub against the parts under pressure. The high pressure sliding rubbing action of media performs the surface finishing of the parts and reduces finishing time to just a few minutes from many hours.

• Weight: 40-50kg
• Color: Silver
• Voltage: 110V
• Power: 9-12kw
• Warranty: 1 Year
• Features: High functionality, Less maintenance, Optimum performance
• Speed: 800-1000 Rpm
• Motor: 3-20 Hp

One of the simplest types of centrifuge widely used in the industry. The solid material is scooped outmanually from the top of the centrifuge.Advantages : Manual removal of solids results in total protection of crystal structure. Extremely simple operation. Very low solids loss in filtrate. Distinct separation between mother liquor and crystal enable better product quality. Available Features : Suspension / Mounting : Inertia Plate and Anti Vibration Mounts ( 4 Point Mounting ). Drive and Transmission : Variable Frequency Drive (Inverter) Optional Features : Full Body Opening ( FBO ) for excellent accessibility for cleaning and maintenance Full Lid opening for accessibility for cleaning and maintenance Cake Thickness Monitoring System cGMP Construction Inerting System Vibration Monitorin

Refrigerated Centrifuges are useful for centrifugation of temperature sensitive material and find applications in routine and research work in auxiliary laboratories in industry, Educational & Research institutions, Bio Technology, Medical Laboratories, Hospitals, Blood Banks, Pharmaceutical laboratories etc The user has a choice of different types of control, i.e. Electronic Controls or Microprocessor based Controls. User can select models as per their requirements from - high volume low speed Centrifuge model C-23 BL / CPR 23, low volume high speed centrifuge model C-24 BL / CPR 24 in table top design & C-30 BL / CPR 30 a compact high-speed high volume floor standing centrifuge. Salient Features• Brush-less induction motor with frequency drive• Precise speed control and reproducibility• Pre setting of speed, temperature and time• Speed holding accuracy 100 RPM• Safety lid interlock to prevent cover opening during centrifugation• Digital speed indicator, 0-99 minute digital count down timer with temperature indicator• Dynamic brake• Imbalance detector with cutoff• Over current overheating safety cutoff for motor protection Additional Features(Microprocessor based models)• Interactive alpha numerical LCD display• Menu driven ten programme memory• Choice of 9 acceleration and 9 deceleration profiles and coasting• Self-diagnosis for errors• Unique safety rotor identification

• Temperature Control: ambient to 93°C (200°F)
• Timer: 0 to 999 min
• Maximum Speed: 2200 RPM

Centrifugation provides a convenient means of determining sediment and water (content in crude oil, fuel oils, middle distillate fuels, and biodiesel. Also used in determining the precipitation number, demulsibility characteristics, trace sediments, and insolubles in used lubricating oils.

We are offering oil testing centrifuge. The range of centrifuge is specially designed for use in oil testing for tests as per astm and ip standards. The unit is fabricated from steel and epoxy coated.

• Type: Centrifuge
• Certification: CE Certified
• Weight: 10-20Kg, 20-30Kg, 40-50Kg, 5-10Kg
• Color: Blue, Brown, Grey, LIght White, White
• Voltage: 110V, 220V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power: 1-3kw, 250-500Wt
• Warranty: 1 Year
• Driven: Electric, Pneumatic