Pultruded Frp Cooling Tower Dealers (30 products available)

• Type: Pultruded
• Material: FRP
• Application: Industrial Use
• Voltage: 380V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1 Year

• Brand Name: KCSPL
• Material: PULTRUSION FRP
• Application: INDUSTRIAL
• Packaging Type: EXPORT STANDARD

We use superior-grade packaging as barrier protection for our products against dust, moisture, mechanical damages and logistical jostling. Our products packaging is premium. Located in Vadodara(India), our company is involved in making available wide array of products that are in conformance with the industry standards.

• Brand Name: GREENPACK
• Material: FRP
• Driven Type: Mechanical
• Color: Light Green
• Automatic Grade: Automatic
• Power: 9-12kw
• Cooling Type: induced draft
• Application: Process Cooling
• Capacity: 500-1000L
• Type: Pultruded Cooling Tower
• Weight: 400-500kg
• Warranty: 2years
• Country of Origin: India
• Temperature: 0-50℃
• Gauge Thickness: 0-5mm

• Material: Pultruded And Hand-Rail Frp
• Type: Counter Flow
• Capacity: 2,000,000-20,000,000 Kcal/Hr Per Cell
• Fabrication: Field-Assembled
• Air Flow: Induced Draft
• Water Flow: 400 - 4,000 M3/Hr Per Cell
• Industries: Oil And Gas, Pharmaceutical, Power Plants, Refineries, Large-Scale Hvac Systems.

Induced-Draft Cooling Towers Made Of Frp. The Structure Of Our Pul. Frp Series (support Beams And Columns) Is Made Of Composite Continuous Fiberglass Pultruded Sections That Comply With Cti Std 137 And Conform To Astm E84d With A Flame Spread Rating Of Below 25. Pultruded Frp Cooling Towers Are Positioned Over A Concrete Basin. Just As Our Sgct Series , Sgct Provides Its Customers With Scale Drawings Of The Concrete Cement, Including Locations And Production Drawings Of All Pipe Fittings In 2d Or 3d, The Size Of A Single Cell Ranges From 3m X 3m To 15m X 15m. When The Concrete Basin Is Ready On Site, Sgco Sends Its Assembly Teams To The Job Site, Where One Team Sets The Pultruded Frp Structure, And The Other Furnishes The Cell Once The First Team Has Erected It.Detail : Pultruded Frp Cooling Towers Have Become An Alternative Solution To Traditional Concrete Cooling Towers, Since In Many Cases They Cost Less And Their Erection Time Is Much Shorter Than That Of Cooling Towers Made Entirely Of Concrete. In Addition, Pultruded Frp Towers In Many Cases Offer Superior Corrosion Resistance.Options : Additional Weil Layers To Increase Corrosion Resistance Pultruded Frp Hand Rails, Walkways, And Ladders Low-Noise Fans. Ss 304 Nut Bolt Or Ss 316. Elevated Basin For Optimal Use Of Space. Features : Pultruded Fiberglass Polyester Field-Erected Cooling Towers Heavy-Duty Cooling Towers Designed For Industrial Applications Optimal Thermal Performance Design Highly Resistant To Corrosive Environments

Towertech Global manufactures pultruded FRP cooling towers and general pultruded cooling towers using top grade raw materials and FRP materials. Towertech is among largest Pultrusion manufacturing facilities across the world. It offers cutting edge technology in Pultrusion and Pullwinding processes. Here, in the TowerTech facility, clients can avail superior pultrusion solutions such as pultruded range of cooling towers and many other structural profiles.The rising queries and demand for using the composites in cooling tower applications have been driven by several factors because of the longevity and ease of use. TowerTech Global manufactures and offers comprehensive range of composite products that can be used in both dry and wet cooling towers.

• Material: Frp
• Application: Industrial Use
• Capacity: 0-500L, 1000-1500L, 500-1000L
• Driven Type: Electric
• Warranty: 1year
• Temperature: 0-50℃
• Brand Name: Progetto
• Field Erected: Any Size any Capacity
• Features: Counter flow design, Single cell to Multi Cells, Custom made option available

We are offering counter flow cooling tower. 50 tr to 1500 tr single and multi cell option steel and frp construction, balarka aerodynamic frp axial flow fan high efficient fills, nozzle, drift standard motor.

<p>Jai Bhawani offers Pultruded FRP Cooling Towers which are designed using Pultruded FRP Sections. The Sections are manufactured using a Mechanized Process Called Pultrusion. Pultrusion uses the extrusion Principle of Producing, having constant cross section to give strength. Jai Bhawani offers fiberglass ppultruded main structure in induced draft counter flow cooling towers.</p>

We manufacture Natural Draft , Induced Draft Cross Flow Counter Flow type, Treated Timber Cooling towers in single cell Multi cell construction. There is no capacity limitation in multicell design. We have designed and supplied multi-cell tower of 9000 m3hr capacity, each cell having 2250 m3hr circulating water and 15°C range at 4°C approach. Mechanical draft towers have either direct driven or gear driven fan depends upon the capacity of each cell. Normally small capacity towers (Aprx. Single cell capacity upto 200 m3hr and DT 15°C ) are direct driven and higher capacity towers are gear driven. We also manufacture single stripping special purpose cooling tower for DT upto 50°C.

These cooling towers are light in weight and corrosion resistant. These are durable products that have high strength. The construction and installation time is lesser as compared to conventional models or wooden cooling tower. Pultruded range of cooling towers supplied by TowerTech Global is not only efficient in performance, but also known for its quality, longevity, and reliability. These are ideal for sea water application as their structure is built with pultruded fiberglass material. Hardware hot dip galvanized is used by manufacturers to make the surface corrosion resistant. Stainless steel hardware can be availed at extra cost. Casing of the tower is manufactured with pultruded FRP sheets that have adequate thickness.

NCTPL offers field erected Pultruded FRP cooling towers. These cooling towers are designed using Pultruded FRP sections, FRP sheets for cladding, Stainless steel for fasteners and other hardware. Properties of Pultruded FRP give the cooling tower distinct advantages over other material of construction like concrete or timber. Now, whenever a timber cooling tower reaches its end of its life, there is always a demand to convert it to Pultruded FRP cooling tower. The strength of Pultruded FRP can be compared with that of steel. Complete technical and dimensional detail about RCC cooling towers can be obtained from our sales and marketing department.

Along with manufacturing a wide variety of new cooling towers due to our flexible, project oriented Engineering and designs, Canara has diversified, expertise in conversion of old timber cooling towers to pulturded FRP cooling towers. Many cooling tower users prefer to repair existing old timber cooling towers, which either have out lived their life or damaged prematurely due to bad quality of materials or other reasons. In reality if the overall condition of the existing cooling tower is bad and requires a major structural repairs, then it is technically and economically advised to convert the old timber cooling tower to pulturded FRP cooling tower. During repairing of old timber cooling towers, only part of the bad quality items are replaced, so un replaced items need to be replaced after some time. Practically repairing of old timber cooling towers takes place every 1- 2 years, which proves very costly affair. Moreover partially repaired old timber cooling tower may fail, collapse partially or fully, which will be dangers in all aspects.

Pultruded FRP based cooling towers have structures having proven Braced Frame Design. These structures are connected to the ground with steel angles and base plates anchored and grouted to the basin. Hardware used at all the places are stainless steel. No piers and pilasters are used in the structure. Frame, Casing, Fan deck, Fan cylinder, staircase, railing, light poles, ladders etc are all of FRP. Wherever necessary anti skid surfacing is used for safety of Operation and Maintenance personnels.  The cell size that can be been designed is 18x18 meters and is capable to handle fan motor power 250 HP/cell. The flow rate capacity of the Pultruded FRP Cooling Towers can range from 500 m3/hr to 40000 m3/hr. ICTMCo. offers field erected Pultruded FRP cooling towers. These cooling towers are designed using Pultruded FRP sections, FRP sheets for cladding, Stainless steel for fasteners and other hardwares. Properties of Pultruded FRP gives the cooling tower distinct advantages over other material of construction like concrete or timber. Engineering at ICTM CO. gives shape to the finest of cooling towers whose aesthetic beauty make cooling tower area very special place in the plant. The strength of Pultruded FRP can be compared with that of steel. With FRP the question does not stop at performance but carries on to beauty and aesthetics. With wide range of colours to choose from, the colour of cooling tower can be matched to rest of the plant. No wonder when ever a timber cooling tower reaches its end of its life, there is always a demand to convert it to Pultruded FRP cooling tower.  For large field erected cooling tower Pultruded FRP structural members are used for constructing the cooling tower. Pultrusion is an industrial process that is dedicated to continuously process Reinforced Plastic having constant cross sectional shape like I, C, U, H, flat panels etc. Reinforcing fibers are pulled through a Plastic liquid impregnation bath through rollers etc. and then through a shaping die followed with a curing action. It produces products which meets high structural requirements, high weight to strength performances, electric requirements etc. In case of Pultruded FRP Cooling Towers materials are shipped to the site and cooling tower is erected first by putting up the structural framework and then fan deck, torque tube, mechanical assembly, fills, casing sheets etc. 

Enhanced range of FRP Cooling Towers Series 20 & 22 Wooden Coooling Towers Pultruded FRP Cooling Towers in different capacity Different Ratio of Gearbox Improved different type of nozzles

The cooling tower was initially manufactured to reuse precious water after a great amount of groundwater had been utilized for industry to make land subsidence a social issue. It might be taken as “water chiller” utilizing common powers. Our cooling tower solutions really help in water resource recycling.

Pultruded Frp Cooling Tower, Chilling Plants, Cooling Tower Spares

Pultruded Frp Cooling Tower, cooling tower fan balancing

Pultruded Frp Cooling Tower, cold storage unit, commercial cold storage

• Brand Name: National
• Material: FRP
• Certification: ISO 9001:2015
• Type: Counter flow
• Voltage: 415
• Condition: New
• Warranty: 1 year from diapatch
• Cooling Type: Induced
• Place of Origin: India
• LIGHT GREY: 2500000

Pultruded Frp Cooling Tower, wooden cooling towers

Pultruded FRP Counter Flow Cooling Tower, Treated Timber Cooling Towers

Pultruded Frp Cooling Tower, frp pultruded profile

Pultruded Frp Cooling Tower, wooden cooling towers, Supply, repairing

Pultruded Frp Cooling Tower, Cooling Towers, cooling tower nozzle

Pultruded Frp Cooling Tower, cooling tower gearbox, Cooling Tower Motors

Pultruded Frp Cooling Tower, Frp Pipe, Frp Ladders, frp bench, frp sections

Pultruded Frp Cooling Tower, Fanless Induced Draft Cooling Tower

Pultruded FRP Cooling Towers, Concrete Cooling Tower