Testing Equipment Dealers in Patlipada, Thane

• Power: from 20 Watts to 900 KW
• Brand Name: APPSYS MT ...
• Torque: From 1 Nm to 5000 Nm
• Speed: Upto 30000 RPM

Various Dynamometers are offered by APPLICATION SYSTEMS for Electric Motor testing, AC Motor testing, DC Motor testing, Fractional HP motor testing, Air Motor testing, Pneumatic Motor testing, Hydraulic Motor testing, BLDC motor testing, Dynamometers employed to test motors are Eddy Current dynamometers, Powder Dynamometers, Tandem Dynamometers, Pneumatic Dynamometer, AC Motoring Dynamometer, AC Regenerative dynamometers, DC regenerative dynamometers. Motor test dynamometer are offered with proprietary software developed for motor test to monitor & display Input Power, Input Voltage, Motor current, Motor Power factor, Output Power, Speed, Torque, Efficiency of motors, motor temperature, bearing temperature, winding temperature etc. Motor Test Dynamometers are offered with PC based control panel with our proprietary APPSYS Motor Test software with Power analyzer. PC based control panel with our proprietary APPSYS MOTOR TEST software is also provided with Dynamometer. Test Reports having Torque-Speed characteristics, Torque-Current and Speed-Current, Efficiency characteristics, Torque-Speed Oscillations at steady state Torque at different temperatures, Temp measurements etc. & custom characteristics required by clients, are exported & saved in MS Excel Tabular form& Graphs Accessories such as Motor Temperature, Winding Temperature measurements, Motors mounting Test bed, Test Stands with T slot having X, Y & Z adjustment for Length, Width & Height adjustments is also offered along with dynamometer

The TABER® V-5 Stiffness Tester - Model 150-B or 150-E is used to evaluate stiffness and resiliency properties of materials up to 10,000 Taber Stiffness Units.  This precision instrument provides accurate test measurement to ±1.0% for specimens 0.004" to 0.219" thickness.  Materials include paper products, cardboard, plastics, metals, textiles, rubber, wire, tubing, felts and other sheet materials.  DescriptionIncorporated in the TABER V-5 Stiffness Tester is a bi-directional pendulum weighing system.  Providing an accurate and responsive method for measuring small load increments, this system is a critical component for determining material stiffness or resiliency.  Nine (9) distinct ranges permit testing of materials that are extremely lightweight and flexible (such as cellophane or thin metallic foils) to items that are very rigid (such as plastics).For test ranges 2 - 9, specimens are mounted on the Taber V-5 Stiffness Tester using a clamping system.  Located on the pendulum, the lower faces of the specimen clamp jaws are exactly on the center of rotation.  This ensures a constant test length and deflection angle for accurate and repeatable results. Both jaws of the specimen clamp are adjustable, so the test specimen can be positioned precisely in the center regardless of material thickness. Force is applied to the lower end of the specimen by a pair of rollers. The rollers, which are attached to a driving disc located directly behind the pendulum, push against the test specimen and deflect it from its vertical position.  The pendulum applies increasing torque to the specimen as it deflects further from its original position.  The test point reading occurs when the pendulum mark aligns with the appropriate driving disc mark (7 1/2° or 15°), which points to the stiffness reading on the dial point.  The final reading will depend on the range in which the test is being conducted and what scaling factor to use.  The instrument outputs the moment load applied to the test specimen in TABER Stiffness Units (g · cm).Note: The right hand roller includes a ratchet stop mechanism that greatly reduces the potential for inter-operator error caused by over or under-tightening.  The travel on the right hand assembly automatically stops when the roller contacts the specimen.To allow the testing of materials with different stiffness properties, range weights can be applied to the pendulum.  For extremely light weight materials, a compensator range weight is mounted to the top of the pendulum.  Range weights of 500, 1000 and 2000 "Taber Units" are mounted to the bottom of the pendulum and required for stiffer materials.  An optional range weight set of 3000 and 5000 Taber units is required for test ranges 7, 8 and 9.Range 1 is used with Taber's optional Sensitivity Range Attachment (also referred to as SR or High Sensitivity Attachment) to test extremely lightweight and flexible materials whose Taber Stiffness Unit value are between 0 - 1.  Examples include cellophane, natural fibres and synthetic filaments, tissue paper, metallic foils, films, etc.  The attachment includes two parts, the Driven Pins Holder which is secured between the clamp jaws, and the Driving Pins Holder which is mounted to the studs in place of the left and right hand rollers.  Both parts include precision pins that are oriented horizontal to the face of the V-5 Stiffness Tester. A specimen 1 1/2" x 1 1/2" is mounted such that the second and fourth pins are above the specimen.  As the driving disc rotates, the fourth pin of the Driving  Pins Holder pushes down on the specimen while the first pin pushes up.  As the sample is deflected, the Driven Pins Holder aligns the pendulum to the appropriate stiffness value.  For Range 1, the specimen is only deflected to the right.Many customers have also utilized the Taber V-5 Stiffness Tester to evaluate wire and cable stiffness characteristics. The tester now incorporates a "v-notch" in the clamps to accommodate this testing. Suggested samples are 70mm long and 3mm - 8mm in diameter, and centered in the notch with care so as to not pinch or crimp the sample. For wire and cable samples less than 3mm diameter, it is recommended to secure the sample at a location in the flat region of the clamp.  Samples with curvature may interfere with proper set-up and function of the Stiffness tester and should be avoided. In addition, test results obtained should be used for comparison only - that is, between lots, between materials, etc.   The following chart is used as a guide when setting up the instrument to determine which test range to use for the type of material being tested.

The FC10Plus  Portable Breath Alcohol Tester offers everything found in the  Lifeloc FC10 breathalyzer  plus password protection, 100 test memory and advanced lockout features to keep your results and settings safe. The Lifeloc FC10Plus  breath alcohol testing device also includes real time date and time stamping.Features : All the advantages of the FC10 screener plus 100 Test Memory and Advanced Security Features Three test modes, Auto, Manual and Passive Instant response for volume-testing applications such as check points, schools, or work release screening Long Battery Life Low cost per test.  

We are offering stiffness tester. precision instrument evaluates material stiffness. the taber stiffness tester utilizes a two directional pendulum-type weighing system to evaluate material stiffness, flexural strength, resiliency and elasticity properties. Force is applied to the lower end of the specimen by a pair of rollers attached to the driving disc. the resulting torque tilts the pendulum from its vertical position and a taber stiffness unit reading (g•cm) is taken automatically when the pendulum mark aligns with the appropriate driving disc mark (71/2° or 15°). Predetermined sample length, deflection angle and rate of loading provide accurate and reproducible test results. onboard computer automates testing. a high resolution optical encoder and a non-contacting photo sensor are incorporated to make this instrument fully automatic. the onboard computer calculates and records testing data (average; standard deviation; high/low; time; date; and a user-defined label), and converts stiffness readings to the appropriate user selected stiffness range. Test results are displayed on a 4 x 20 character display screen, and can be printed, stored or downloaded to a pc. test a wide range of products. nine distinct setups permit the testing of very delicate to extremely rigid materials. Taber stiffness testers will evaluate paper, light metallic foil, laminated plastic, cardboard, wire, and other flexible materials up to 5.5mm (0.219 inches) thick that do not exceed 10,000 taber stiffness units.

We are offering single use data logger. The single use envirosudl has been designed specifically to continuously and accurately monitor and log, in a tamper proof manner, the temperature of the export consignments in transit, providing rich mis in 21 cfr compliant pdf format to ensure accuracy and data integrity. It accurately monitors ultra sub zero to low temperatures. Logs at set intervals, after the start delay as set by you, and also when a deviation event takes place. Can log as many as 6000 readings in transit. Excellent battery life depending on the frequency of temperature logging ie the interval. Auto email. Logged data is automatically sent by email, directly to the registered id of the exporter. The same data can also be uploaded to the enviro website, with a unique device id, to be accessed by the exporter. Various important mis reports and graphs are available, such as the mkt calculation in 21 cfr part 11 compliant pdf format and the tti report as per usp chapter 1118 on monitoring devices.

Flow Meter transducer adapts to measure the liquid rate and total flow rate of low viscosity and for clear liquid. It can be widely used in the fields of petrol, chemical Industry Metallurgy , Scientific research for measuring or control. Several output display methods can be selected.

To monitor the volume of oil in the accumulator at the fluid port of the accumulator an equipment consisting of a tube with piston attached to reed switch to sense its position is fitted.

• Weights: 2.16 kgs. and 5.0 kgs.
• Max. Temp.: 300 ° C

Melt Flow Index instrument measures the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position. This instrument measures the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position. Instrument with the following accessories are supplied : Digital Timer, Temp. Controller (PID), Piston, Barrel Cleaner, Orifice Cleaner Scoop,

• Brand Name: Automatic Electric Ltd.
• Product Code: AE 1440

AE -1440 is developed specific for Utility Substation applications. .AE – 1440 computes -Display, Monitor, stores, and communicate up to 67 major electrical parameters, including true RMS Voltage, Current, PF, Frequency, Active power, Reactive power, Apparent power, Active energy, Reactive energy, Apparent energy, Total harmonic distortion (THD) and Maximum demand. The meter offers simple user-friendly Programming of Voltage, current, and power Measurement parameters using a menu driven interface. Status of all parameters can be viewed through 30 main Screens on the 3 line, 4 digits LED display. The AE -1440 has digital RS485 Communication outputs for MODBUS and is ideal for Energy Management System at Electrical Substation. Operation AE – 1440 offers high functionality and uncomplicated operation. AE- 1440 measures all the values needed to monitor power and Energy. A five-button interface on the front panel gives simple access to the measuring, display and configuration screens. With the help of “A” (navigation key) buttons, we can access total 67 major electrical parameters. The parameters to be viewed through display screens.

• Accuracy: + 1% of F.S. + 1 digit
• Display: 16 x 2 alpha numeric LCD display
• Range: 0.1 uS to 100mS (6 decadic ranges)
• Resolution: 0.1
• Calibration: Auto / Manual
• Temperature Range: 0 to 100°C
• Cell Conatant: 0.1 to 5.0
• Storage: Up to 100 samples
• Power: 230V + 50Hz
• Accessories: Conductivity Cell, Temperature probe, Stand, Clamp, Dust cover, Manual

We are well known for supplying of wide variety of Magnetic Level Indicator.

The young lin blood alcohol concentration (bac) analyzer can precisely analyze the amount of alcohol in the blood of a suspect related to drunk driving. It can also distinguish the drinking of inedible alcohol by analyzing methyl alcohol or alcohol metabolites in blood.

• Automation Grade: Manual
• Model Name/Number: 550 / 551
• Brand Name: Taber
• Hardness Scale: Balanced, calibrated scale beam

Need for checking the adequacy of Insulation, provided in the electrical apparatus, cannot be over emphasized. Insulation between the live and earth or between two different sections of live parts, this insulation is required to be tested at high voltage values recommend by applicable relevant standards. The standard specifications for various electrical apparatus specifies power frequency voltage withstand tests at different levels depending upon the working voltage of electrical apparatus. It is observed from the various standard for electrical equipments that the minimum power frequency voltage withstand test level for electrical Insulation is 2KV for one minute.

We are offering electronic hour meter. Universal application for tractors, trucks, cars,heavy earth movers, boats and many more. 52 mm dia, 7 digit display, with least significant digit being 1/10 hour , in put voltage from 10-60v ac/dc, high impact durable plastic case is tempere proof.

• Gas Group: IIA, IIB and IIC
• Zone Protection Class: Zone 1 and Zone 2
• IP Protection: IP65/66
• MOC: SS304,SS316,SS316L, Brass Nickel Plated, Aluminium Alloy (LM6)
• Mounting: Different for different type of fitting.
• Cable Entry: As per customer specification. Size and type like

Flame Proof Data Loggers suitable upto 5HP/10HP DOL Starters.   •  Applications :   1) Road traffic counting   2) Measures temperature, pressure, humidity etc   3) Environmental monitoring   4) Water level monitoring for underground water   5) Tank level monitoring.   6) Soil moisture level recording.   7) Instrument Panel/ Temperature indicator panel.   •  Features :   1) High Tensile strength   2) Protect  IP65/66   3) Available for Zone1 and Zone 2   4) Gas Group IIA,IIB and IIC   5) Ex d , Explosion Proof, FlameProof, Weatherproof

All the instruments offer 12 steps of test force: 1, 5, 10, 15, 25, 50, 100, 200, 300, 500, 1000, 2000 p (gf) covering the range of test forces required by the standards ASTM E-384, EN ISO 6507 and EN ISO 4545. At the touch of a button, the test force is automatically selected. The test force can also be changed by the computer when running automated measurement cycles and as a consequence allowing different test forces in the inspection.

Capacity: 100 - 400 liters Temperature range: -70°C to 200°C Humidity range: 40% to 98% @ 20°C to 60°C. Rate of Heating & Cooling: 1°C min, 2°C min, 5°C min & 10°C min.

• Test Options: Flow Function
• Application: Flow Tester
• Temperature Sensor: DVP-94Y
• Humidity Sensor: PFT-607Y
• Vane Lids: 316 s/s
• Width: 14 inch
• Load for Vertical Axis Compression: 7 kg - Accuracy +/-0.6% FSR
• Axial Speeds: 0.1 mm/second up to 5mm/second
• Trough Rotational Speeds: 1 revolution/hour (RPH) up to 5 RPH
• Temperature Sensing: -20 Deg C to 120 Deg C
• Humidity Sensing: 10% to 95% RH +/-5%

EXAIR’s Digital Flowmeter is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used downstream. This makes it possible to save thousands of dollars per year in compressed air waste – helping to identify costly leaks or inefficient air products. Many companies install the Digital Flowmeter on each major leg of their air distribution system to constantly monitor and reduce compressed air usage.   Advantages • Easy to install • Summing Remote Display And Data logger Available • No Moving Parts • Sensitive At Low Flows • No Calibration Or Setup required • Includes All Components For Installation • Model From 1/2" to 4 Schedule 40 Iron Pipe in Stock • Model Are Available For Sizes 1/2" to 6" in Iron Pipe • Model Are Available For Sizes 3/4" to 6" in Copper Pipe

We offer shaw digital dew point meter. We bring forth for our clients, an accurately performing range of sadp-d (shaw digital dew point meter) that is used as a dew point meter. Widely used for spot checking and cylinder, these sadp-d digital meters are widely appreciated by our client for their precision output and reliability.

Above testing unit are in compliance with International standards and with rebound and ultrasonic testing principles.

• Temperature: 130°C
• Main chamber pipe: S.S. / P.P.
• Float: SS 316 / P.P.
• Outside casing pipe: Bicolour red & white magnetic roller
• Pressure: 20 Kg/cm2 0r 50 Kg/cm2
• Available Length: Maximum 3.5 meters

Side mounted magnetic level indicator works simple magnetic principle used to get unique, most reliable & absolutely safe level indicator. It is mainly under used for most dangerous liquids even with under high pressure & high temperature.The unit consists of all SS 316 parts. With inside of SS main chamber pipe, the SS magnetic float which moves up & down. Accordingly follows liquid variation in the tank.The Float Magnet is operated by magnetically coupled to the Bicolour red & white outside chamber, which is mounted on front side of the main S.S. pipe.

foam tester, multifunction rheometer, Resilience Tester, rheometer

• Brand Name: EXTECH
• Model: EC600-EC400-WQ510
• Application: Industrial
• Type: Meter
• Power: Electronic

We are offering best bitumen testing equipment

trivector meter, single phase meters, trackside transformers