Wireless Motion Detector Dealers

A NEGAVEEZ PIR Motion Detector offers security and convenience in the areas that they cover. Motion detector is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. The Electrical Loads can be Lights, Fans, Air Conditioning Units for Energy Saving Application or Siren, Buzzer along with Lights for Security Application. When it detects human movement within its detection area, it automatically turns ON the load. The Loads Continue to be ON till the time Human Movement is detected. The Loads are turned OFF after preset time delay if no movement is detected within the set time. It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings along with security.   TECHNICAL SPECIFICATIONS: Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection DC 12 V/24 V versions are also available*** PIR Sensor: Dual Element Pyro Electric Sensor Time setting: Min 30 sec to Max 30 min to turn OFF loads after the last detected motion. Default time is 30sec. LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition. Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating. Sensor warm-up time: 1 Minute Sensing angle: 140 degrees Sensing distance: 10-14 Meters Operating Temperature: -10oC to 50oC Protection class: IP55 Enclosure is protected from environmental conditions that are water and dust. EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players. Over Current & Short Circuit Protection by an external replaceable fuse In built Protection circuit for lighting loads Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON ***

We are offering a quality range of panasonic pir sensors. Features: low current consumption built-in-amplifier. Smooth surface lens for standard and long detection. Available in wl, vz and napion series detection range : 5 (m) application: occupancy detection, motion sensor lights, computer monitor, security system, automatic control, corridor, stairs lights etc

We are offering Outdoor Pir Motion Sensor. We are engaged in manufacturing and supplying superior quality Outdoor PIR Motion Sensor. The Outdoor PIR Motion Sensor offered by us possesses matchless features including excellent detection range, less power consumption, high range of ambient light, and various others. Widely appreciated for quality richness and hi-tech features, our Outdoor PIR Motion Sensor is extensively demanded for both residential as well as commercial establishments. Outdoor PIR Motion Sensor Specifications Power source : 220-240V/AC, 100-130V/ACRated load : 100W (max.)Detection distance : 8m (max.

Specifications:   Rated Voltage: 230V AC 50Hz Load Wattage: Max.1500W incandescent bulb or Max. 300W fluorescent lamp Detection Area: Max. 5 Meters in radius Detection Angle: 360° around Time –delay: From 10 ± 5 seconds to 4 ± 1 minutes adjustable Protection Class: IP 20   Features:   Stand alone 220V AC operation Room Can switch light load of up to 300 Watts DetectionRange 5m in radius Lux Level Control & Time control Re-trigger Function Applications:   Offices / Conference Toilets Pantry Stores / Stairways Lifts / Lift Lobby Dining Area / Canteen Basement / Covered Parking Area Locker /Safe Room in banks/ Vaults ATMs - Colleges/ Schools/ Institutes Multi- Apartment Complexes Hospitals /Nursing Homes Malls And many more places…!

Motion Sensor for Factory Warehouse and Godown. IS 345 Mx Highbay [High ceiling mount PIR motion sensor] Type : - 180° PIR Motion Sensor Ceiling Mounting Height : - 12 meters Application : - Factory Warehouse and Godown Technology : - Ceiling mount Passive Infrared PIR motion sensor Reach : - 30 meters x 4 meters Time Setting : - 5 Sec - 15 Minutes Lux setting facility : - 2-2000 Lux Load switching : - 1000 W uncorrected inductive loads like fluorescent lamps/tubes with electronic ballasts - 230V AC 50 Hz. http://www.occupancysensor-motionsensorlights.com/warehouse.php

We also Deal in Speed Breakers , Breath Alcohol Analyzer, Solar Blinkers, Delineator (With /Without Pole), Manhole/Jumbo/Median , Portable Barricade, Metal Delineator, Safety Cones, Safety Chain, Queue Manager Barricades, Modular Barrier, Spring Post, Flexi Post, Pillar Guards, Convex Mirrors, Bollards, Crash Barrier, Road /Park /Solar Stud, Traffic Baton, Reflective Jackets, Signage, Caution Sign ,Solar Traffic Signage, Solar Street Light, Speed Limit Indicator & Wheel Stopper & Wall Guard.

Can detect surrounding environment of the humidity and temperature DHT11 sensor adopts Humidity measurement range: 20% ~95% Humidity measurement error: ±5% Temperature measurement range: 0℃~50℃ Temperature measurement error: ±2 ℃ Operating voltage:3.3 V~5 V Output form:digital Has fixed bolt hole and easy installation

We source the raw material from the trusted places in the market. As a result of which, the finished products stand high on the expectations of the clients. Engaged in the industry as a prominent Supplier of PIR Motion Sensor Switch, we present the finest range of products.

we are offering Pir + Mw Motion Sensor. • advanced dro type microwave sensor • target size verification (tsv) technology • superior rfi and emi protection • adjustable microwave detection range • almost no false triggering. • fluorescent light interference filter circuit

Infrared photocell sensor designed for avoiding the crash when the boom falling, so as to prevent the vehicles from being pressed.It can not only use with boom barrier, but also use with sliding gate motor.