Post Free Ad Sign Up

Industrial And Commercial Heaters Dealers in Udaipur

(28 products available)
Madri Hiran Magri Transport Nagar
  • Premium
    Immersion Heater

    Immersion Heater

    Get Price Quote
    • CertificationWill be provided based on Requirement. ( U, U2, ATEX, IEC Ex, CCOE, etc)
    • RatingFrom 0.1 1kW to 5000kW (Max) in Single Bundle or combination
    • Design Temperature-40 deg C to 650 degrees C
    • Design PressureUp to 350 bar(g)
    • Element Outer SheathSS , Alloy 600 series, Alloy 800 series, Hastelloy, Titanium, copper etc
    • Terminal EnclosureAs required (Weatherproof or Flameproof)
    • Control SystemThermostat control / Contactor control / Thyristor control / combination
    • InstallationHorizontal / Vertical / direct / indirect
    • For any Production/process facility, when a large volume of fluid to be heated before pumping out to process application, the Immersion Heaters are always the best-recommended solutions. A single bundle or multiple smaller units can be installed in the Tank for the uniform heat transfer and steady heating of the fluid with all safety precautions in built within the heater and control system.Some of the precautions to be taken while designing and selecting an Immersion heater are Selection of right material for the wet parts to avoid potential corrosion from the fluid to be heated. Proper cold length & active length ratio to avoid hot spots & dry heating. Element skin temperature within flash point limit of the fluid to avoid any hazard. A Proper thermal design is very much necessary whenever heating a flammable fluid or in hazardous area installation. Fixing method & support for the bundle considering the turbulence during the in & outflow. Control system for both element skin & fluid temperature. ConstructionTerminal Enclosure: Marathon flameproof heaters are certified to install in hazardous area Zone 1 & 2 , Gas group IIC, IP66. The Terminal enclosure is designed to protect the terminals of the individual elements from external impacts, such as dust, moisture etc and to facilitate the connection of the Incoming power supply to the heater bundle.Heater Bundle: Consist of No. of U Pin heating elements adequately supported by set of Baffles & Tie rods, designed to deliver the specified temperature at outlet by maintaining the element temperature & pressure drop within the safe limits. Heating elements can be fixed to heater flange by means of standoff sleeve pipes with brazing or by direct welding or by means of threaded couplings. Heat duty of a bundle can be divided in to many sub groups (banks) based on process conditions. This will help in better control as flexibility in the operation.Temperature Sensors: The Heater bundle will have Element skin temperature sensor for monitoring and regulating the Element skin temperature within the limits. The Unit may also need additional sensors such as Tube sheet Temperature Sensor, Terminal Box Sensor, vessel Body temperature sensor and process fluid Temperature sensors based on case to case. The Sensors used for the system will be certified in accordance with the area of installation. The Temperature sensors are Typically RTD or Thermocouple. A simple heater bundle can also be controlled using Thermostat protection for skin & process temperature. If the Operation pressure is High, It is recommended to have a PSV (Pressure safety Valve) installed within the Heater Vessel as an additional safety measure.Control Panel: Heater controls Panel are designed to monitor & control the operations of the heater bundle also to ensure the safety of the equipment and operations. The control logic can be either ON/OFF (contactor) or regulated (Thyristor) or combination of both in a single panel. The control panels can be installed in both safe area & hazardous area by following respective design guidelines & certification requirements. The Control Panels are provided with various indication systems such as Power ON, Heater ON OFF, Trip, High Temperature etc for comfortable handling of the process. The Temperatures of Elements, Process fluid & other areas (with sensors) are displayed on the Panel for better monitoring & awareness. Control Panel will also have safety interlocks such as high element temperature, Earth fault, process over temperature etc along with Emergency stop access for the safe operation and control.Advantages Heaters can be used for quick heating of small volume storages as well as for heating large volumes with longer operational hours Widely used for heating high viscous fluids ( Bitumen, HFO etc) and reduce the viscosity before pumping out Environment-friendly design. No hazardous gas/smoke/ emission from the system. Precision Temperature control Can be accommodated in small footprints. Custom designed to meet specifications. Highly energy efficient and provide maximum dielectric strength. Compatible with standard industry piping and safety standards. Reliable design. Easy to operate and maintenance-friendly. Energy Saving. No need to drain the tank for any repair/replacements in case of indirect Immersion Heaters. Heating Elements: Mineral filled insulated Heating Elements or Tubular heating Elements with Ni-Cr (80-20) as heating Coil and suitable outer sheaths. Protections & control: Element Skin Temperature Control, Process Temperature Control, Earth Leakage Protection Overload Current Protection, Temperature Class Protection ( for Hazardous area only) Application At large Storage Tanks for preheating of thick fluids. Oil Heating (crude, Thermic fluids, and other Process fluids etc in storage tanks). Water heating applications & vaporizer System. For reducing the viscosity of the fluid and make it suitable for pumping out. Steam Boilers. Oil cooling systems & compression packages Edible oil heating for food industries.
    ...more
    www

    Tempsens Instruments (India) Limited

    Madri, Udaipur
    GST 9 yrs 4.4 (7)
  • Bobbin Heater

    Bobbin Heater

    1,000 / Piece
    • Country of OriginCustomized
    • Power(Watts)Up to 6 kW
    • Temperature0 to 250 Degree C
    • BenefitsHighly efficient, Long working life, Versatile and nonpolluting, Good conductor, Highly suitable for low watt densities.
    • Sheath MaterialCopper, Steel, 304 Stainless Steel, INCOLOY
    • DiameterUp to 50 mm
    • ControlThermocouple, RTD, Thermostat, Digitally Controlled
    ...more

    Tempsens Instruments (I) Pvt Ltd

    Transport Nagar, Udaipur
    14 yrs
  • Solar Water Heater

    Solar Water Heater

    Get Price Quote
    Solar Water Heater is useful at places that need large quantities of hot water. Installing Solar Powered Water Heater is relatively cheaper in long term when compared to other conventional water heating sources. We are the Manufacturer, Exporter and Supplier of a wide range of Domestic Solar Water Heaters that is the best in terms of efficiency. Our Solar Water Heaters are made from good quality materials, which make them reliable for longer use. We are counted among the reliable Solar Water Heater Suppliers in India. Our Solar Water Heaters find application in varied places across the industry like homes, hotels, hospitals, etc. Applications Residential CommercialIndustrialHotels & ResortsHouses & BunglowsHostels & RestaurantsApartments & Institutions Hospitals & nursing homes Industrial & Commercial Advantages Pollution freeInexhaustible supply Run on free fuelLong life
    ...more

    Gehlot Associates

    Hathipole, Udaipur
    13 yrs
  • Premium
    U-Shaped Air Heater

    U-Shaped Air Heater

    Get Price Quote
    • ShapeU shape
    • Country of Origin230
    • MaterialFiberglass Flexible
    • Size1 meters to 2 meters
    • Outside Dimensions11 mm X 3 mm
    • Cold Tails Length0.5 m
    • Our company is specializes in manufacturing and supplying sturdy U-Shaped Air Heater in India and abroad at market leading prices. The U-Shaped Air Heater, offered by us, is highly capable of being accommodated into any configuration to heat liquids, air gases and surfaces providing uniform heating with low power consumption. Avail them from us in varying sizes.
    ...more
    www

    Nutech Electinstruments (I) Pvt. Ltd

    Hiran Magri, Surguja
    GST 17 yrs 4.6 (30)
  • Flanged Immersion Heaters

    Flanged Immersion Heaters

    Get Price Quote
    • Country of OriginUp to 600 V
    • Diameter0.260”, 0.315”, 0.375”, 0.430” or 0.475”, 0.625”
    • Flanged industrial immersion heaters are amongst the most popular heaters owing to wide customization, easier installation and operations in stringent environment. Made by brazing or welding flange with several hairpin elements or bulge tubular elements, these are designed for heating chemical, petroleum and water based applications specially heat transfer fluids, medium and lightweight oils and water in tanks and pressure vessels. A thermocouple or RTD is often used within the bundle of elements to maintain the desired target temperature. Extra wiring boxes to make electrical connections are provided with it. Tubing known as a thermowell is used to protect thermocouples and heating elements. Temperature readings are then transmitted to a control unit that regulates power. Although, they occupy a small space, but have a large heating element which is perfect for applications which require high wattage heating. This is one of the most efficient forms of process heating with nearly 100 percent efficiency.
    ...more

    Marathon Heater (I) Pvt. Ltd.

    Madri, Udaipur
    12 yrs
  • Finned Strip Heater

    Finned Strip Heater

    Get Price Quote
    • Sheath MaterialSteel, 304 Stainless steel, Iron, Aluminum, Zinc coated Steel
    • Watt DensityUp to 38 W/square inch
    • Finned Strip Heaters are used for both forced and natural convection air heating. It is designed using a helically wound resistance coil placed on a ceramic insulator. Remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Continuous spiral fins are permanently furnace brazed to the sheath. Stainless steel rectangular tubing is used to house the heater assembly. It can be easily regulated by using a heating control panel or a thermostat as temperatures can reach as high as 500 degrees F. Lower sheath temperature and element life are all maximized by this finned construction as the fins improve heat transfer in free or forced air heating applications. They can be molded into rectangular, spiral, round or any shape as demanded. Finned Strip Heater is a flexible and reasonable heating source used across a wide range of applications such as surface heating (platens, dies, molds, tanks, piping); process air heating (drying cabinets, ovens, baking ovens, vacuum dehydrating ovens, moisture protection for motors); dropping resistors for line applications in railroads and load banks; winterizing (hoppers, conveyors, ducts, car heating, thawing); original equipment (air conditioning, laboratory equipment, food packaging, ovens, presses, drying equipment).
    ...more

    Marathon Heater India Private Limited

    Transport Nagar, Udaipur
    9 yrs
  • Industrial Heaters

    Industrial Heaters

    Get Price Quote
    • UsageProcess Heating Applications
    • Number Of FlowerIndustrial Heating Systems
    • Power SourceElectric
    • Trust LevelTrusted By Global Industries
    • Tempsens is a leading industrial heaters manufacturer, trusted by global industries for delivering reliable, process-engineered thermal systems. Our industrial heating systems are developed to meet the exact demands of modern process control—where thermal accuracy, energy efficiency, and system integration are essential.
    ...more

    Tempsens Linn Thermal Solutions Pvt Ltd

    Madri, Udaipur
    11 yrs
  • Ceramic Band Heater +3

    Ceramic Band Heater

    500 - 1,500 / Piece
    • MOQ5 Piece
    • Resistance Tolerance-5%, +3%
    • Thickness12 Mm
    • Country of Origin110 V /230V/ 440 V
    • Length50 mm And Above
    • Brand NameFLOMAC
    • MaterialSteel
    • Sheath MaterialStainless Steel and anodize coated Galvanized sheet
    • ConductorNi-Cr 80/20
    • Diameter50 mm and above
    • Insulation Thickness32mm/54mm/74mm
    • Watt Density25 W to 50 W/sq. Inch
    • ClampingM6 Allen bolt with spring
    • TerminalJunction Box, Junction Box with Breaded Wire, Post Terminal
    • Ceramic Band Heater FLOMAC offers Ceramic Band Heaters are engineered to suit industrial requirements for high-temperature, long-lasting heaters. These heaters are well-suited to fulfil the demands of today's modern resins, which require continual temperature increases during processing. Internal resistance coils are spirally coiled and laced through interlocking ceramic "Knuckle" in this ceramic band heater. The ceramic core or "mat" of the tiles is concealed beneath a stainless-steel sheet with serrated edges. The combination of the two makes this heating system both versatile and efficient. The ceramic band's heat comes from the inner coils, which conduct heat at high temperatures. They distribute heat uniformly across the tiles, which radiate energy into the barrel. We have a variety of ceramic band styles with different Ceramic Band Heater Power Saver Additionally, FLOMAC provides ceramic band heaters designed specifically for injection moulding machines and other applications requiring greater temperatures. Up to 30% less electricity can be used with these heaters. At a temperature of 250°C, the outer shell will be 70°C. the barrel's temperature measurement. The purpose of the element winding is to both convey energy through contact with the barrel and heat the ceramic blocks to the point where they radiate energy into it. Perforated Ceramic Band Heater We also provide perforated ceramic band heaters, which are commonly used in blow moulding machines, extrusion cooling, and PVC injection moulding. The perforated metal sheet allows the heater band to be 60% open, maximizing surface exposure for optimal cooling. A blower cover is placed over the heater band to mount the blower. Lower costs, ease of replacement, less maintenance, no leakage issues, and consistent temperature control are some of the benefits of air-cooled operations versus liquid-cooled ones. Features 1. Superior heat transfer & uniformity 2. Easy Replacement & Low Maintenance 3. To Heat and Cool the Barrel 4. Improves Quality of finished products 5. Available with Various Diameter, Length, Voltage, Wattage and Configurations 6. Perforated heater will give faster cooling on barrel 7. Constant and long lasting efficiency           Applications 1. Blow Molding Machinery 2. Extrusion Machinery & Dies 3. Injection molding machines 4. Other Process Applications 5. Blow Film Co-ex Lines   6. Laboratory Equipment
    ...more

    Flomac Instruments

    Titardi, Udaipur
    GST 3 yrs 5.0 (1)
  • Laboratory Heating Mantle

    Laboratory Heating Mantle

    2,000 - 10,000 / Piece
    • MOQ1 Piece
    • Brand NameERA Heating Mantle
    • Packaging Detailspacked in wooden Box
    • Place of OriginRajasthan, India
    • Lab Heating MantleElectric
    ...more

    The Era International

    Toran Bawri, Udaipur
    12 yrs
  • Flanged Immersion Heaters

    Flanged Immersion Heaters

    2,000 / Piece
    • Number Of FlowerFlanged Immersion Heaters
    • MaterialAlloy Steel, Cast Iron, Copper, Mild Steel, Stainless Steel
    • CertificationCE Certified, ISO 9001:2008
    • ApplicationImmersion Boiling
    • Country of Origin110V, 220V, 380V
    • ConditionNew, Used
    • Power SourceElectric
    ...more

    Tempsens Instruments (i) Private Limited

    Udaipur
    17 yrs
  • Industrial Heaters

    Industrial Heaters

    Get Price Quote
    We offer wide range of Industrial heaters – High Watt Cartridge Heaters, Tubular Heaters, Silicion Heaters, Mica Band and Strip Heaters, Ceramic Heaters, Air Heaters and Custom Heating Built Units. • ISO 9001:2008 • UL & CE certified plant
    ...more

    Tempsens Instruments

    Madri, Udaipur
    10 yrs
  • Solar Water Heater

    Solar Water Heater

    Get Price Quote
    We are offering domestic flat plate solar water heater we are based at udaipur rajasthan. We offer our customers a wide range of residential solar water heater systems. It's eco-friendly, high thermal efficiency, instant hot water any time, durability & very compact, output temperature up to 85ã�â°c, short repayment period. It is a flat plate solar water heating system works on thermosyphone cycle. The material, its made of, is selected such that its performance is not affected over long time. So itã¢ï¿½ï¿½s a perfect system to fulfill your domestic requirement. Don't miss this opportunity to save on your bills! contact us today, while you're looking about saving. These residential solar water heater systems are available at industrial leading price.
    ...more

    Shree Ji Solar Energy Solutions

    Fatehpura, Surguja
    16 yrs
  • Flanged Immersion Heaters

    Flanged Immersion Heaters

    Get Price Quote
    Flanged Immersion Heaters, Mica Band Heater, Silicon Rubber Heate

    TEMPSENS INSTRUMENTS (I) PVT. LTD

    Madri, Udaipur
    8 yrs
  • Nozzle Heaters

    Nozzle Heaters

    Get Price Quote
    Cartridge Heater, Viper Coil Heater, Mica Strip Heaters, Band Heate

    MARATHON HEATER (I) PVT. LTD.

    Transport Nagar, Surguja
    11 yrs
  • Industrial Solar Water Heater

    Industrial Solar Water Heater

    15,500 / Units
    • MOQ5 Units
    • FeaturesSturdy design, High functionality, Long working life .

    Mundra Energy Pvt. Ltd.

    Sector 11, Udaipur
    9 yrs
  • Solar Water Heater

    Solar Water Heater

    14,000 / 100 Litre
    Solar water heater starts from 100 ltr to 1000 ltr 24 hr hot water available there is a subsidy on it from your electricity department on your electricity bill durable safe no ellectric heater requirment etc.

    RB Technology & Energy Solution

    Hiran Magri, Surguja
    9 yrs
  • Solar Water Heater

    Solar Water Heater

    Get Price Quote
    Solar Water Heate

    Gloima Metal

    Surajpole, Udaipur
    14 yrs
  • Industrial Heater

    Industrial Heater

    Get Price Quote
    Industrial Heate

    Heatsens Technology

    Udaipur
    2 yrs
  • Solar Water Heater

    Solar Water Heater

    Get Price Quote
    Solar Water Heater, Solar Home Lighting System, Solar Inverte

    Novergy Energy Sol

    Fatehpura, Udaipur
    12 yrs
  • Solar Water Heater

    Solar Water Heater

    Get Price Quote
    Solar Water Heater, Solar LED Lights, Solar Panels, Solar Produc

    Enspace Energy Systems

    Sector 14, Udaipur
    12 yrs
  • Furnace Heaters

    Furnace Heaters

    Get Price Quote
    Furnace Heaters, Thermocouples, Infrared Non-Contact Pyromete

    Tempsens Instruments Pvt. Ltd

    Madri, Udaipur
    6 yrs
  • Industrial Heaters

    Industrial Heaters

    Get Price Quote
    Industrial Heaters, Timing Belts, Colet Multi Boring, Glue Applicato

    Tech Supports

    Hiran Magri, Surguja
    14 yrs
  • Cartridge Heaters

    Cartridge Heaters

    Get Price Quote
    Cartridge Heaters, Thermocouples, Temperature Sensors, Thermowell

    Tempsens Instruments Pvt Ltd

    Madri, Surguja
    14 yrs
  • Immersion Heater

    Immersion Heater

    Get Price Quote
    Rtd Probe

    THERMOSENSE ELECT INSTRUMENTS

    Hiran Magri, Udaipur
    12 yrs
  • Cartridge Heater

    Cartridge Heater

    Get Price Quote
    Cartridge Heater, Thermostat

    Marathon Heaters India Pvt. ltd.

    Transport Nagar, Udaipur
    12 yrs
  • Solar Water Heater

    Solar Water Heater

    Get Price Quote
    Solar Water Heater, Biomass Briquette

    Shri sai agro fuels

    Hiran Magri, Udaipur
    12 yrs
  • Solar Water Heater

    Solar Water Heater

    Get Price Quote
    Solar Water Heater, Solar Light, Solar Pump

    Dharti Enterprises

    Adarsh Nagar, Udaipur
    12 yrs
  • Solar Water Heater

    Solar Water Heater

    Get Price Quote
    Solar Water Heater, Solar LED Street Light, Solar Water Pum

    niscon sor urja experts pvt. ltd.

    Surguja
    11 yrs
Filter by Locality

GENERAL LINK

Top Cities (India)

Udaipur Localities

top