Tablet Compression Machine Dealers

We are offering compression testing machine, compression testing machine (electrically operated) - four pillar type it is an electric machine that can also be hand operated for compression tests on concrete specimens up to 20 cm dia and 30 cm in height. The machine has the ability to precisely meet the essential requirements of various indian, british & american standards for compression tests. Loading unit: the hydraulic jack of 2000 kn capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. Pumping unit: the motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is a separate unit that is connected to the jack by means of a steel connecting tube. To connect the motor to the mains a junction box is suitably fixed that is initiated through a push button. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed at such an angle on the pumping unit that enables easy read ability. A hand wheel control is fitted in the machine which enables the rate of application of load to be varied. In case of power failure, the machine is equipped with a facility for hand pumping. The electric pumping unit is fixed with a micro-switch that automatically turns off the motor when the load on the machine reaches the rated capacity. In case of power break-down relays are incorporated in the pumping unit so that, the motor will stop and would not-re-start unless starting switch is turned on.

• superior quality graded cast iron body. • system for weight and pressure adjustment. • contact parts: s.s. 304/316. • stroke per minute: 45 nos. • max. Diameter of tablet: 38 mm. • depth of fill: 22 mm. • pressure: 21 tonnes. • size: 60 cm. X 50 cm. X ht. 125 cm. • weight (approx.): 500 kg. • electricals: 3 & 5 h.p. Motor- 3 - phase.

We are regarded as the leading manufacturer, exporter and supplier of Concrete Compression Testing Machine in Kolhapur, India. The offered machine is available in both manual and electrical configuration. The machine has high stability and durability. They are designed keeping in mind quality standards and norms. The machines can be availed from in various dimensions as per the specification of the client. Specifications : RSI-095 Compression Testing Machine, hand operated, 2000 Kn (200 tonne), Channel Model: Fitted with double plunger pump and hydraulic Load gauge 0-2000 KN cap RSI-096 Compression Testing Machine, hand operated, 2000 KN (200 tonne), 2 or 4 Pillar model, with separate pumping unit connected by a copper/rubber hose pipe, double plunger with pressure gauge 0-2000 KN capacity. RSI-097 Compression Testing Machine, 250 KN (25 tonne) Electrically-cum-manually operated. Two Four/Pillar Model. " Compression Testing Machine, 500 KN (50 tonne) Electrically-cum-manually operated. RSI-099 Compression Testing Machine, 1000 KN (100 tonne) cap. Electrically-cum-manually operated. 2 or 4 Pillaar Model RSI-100 Compression Testing Machine, 1000 KN (100 Tonne)cap. Electrically-cum manually operated. 2 or 4 Pillar Model : with two pressure gauges i.e. 0-500 KN x 2.5 KN divn. and 0-1000 KN x 5 KN/ divn. RSI-101 Compression Testing Machine, 2000 KN (200 Tonne) cap. Electrically-cum-manually operated. 2 or 4 pillar model. RSI-102 Compression Testing Machine, 2000 KN. (200 tonne) cap., Electrically-cum-manually operated with two Load gauges 2 or 4 Pillar Model. 0-1000 KN x 5 KN/divn. and 0-200KN x 10 KN/divn. RSI-103 Compression Testing Machine, 2000 KN (200 tonne) cap., Electrically-cum-manually operate with 3gauges. 2 or 4 Pillar MODEL. 0-500 KN x 2.5 KN, 0-1000 KN x 5 KN/div. and 0-2000 KN x 10 KN/divn. RSI-104   Compression testing Machine. Digital 2000 KN x 1 KN least count.                       RSI series Compression Testing machine are the finest of there type obtainable. The rugged construction & extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. RSI Compression Testing Machine conform to the requirements international Standards like BS ASTM & Indian Standard IS:516.   Some Salient Features : High Stability, Self Aligning Platen Suitable for Testing Cubes and Cylinders of various sizes, Brick can also be tested, Digital having function of peak hold facility, memory status, automatic cutoff of maximum Load, Alarm generated when the sample breaks down, Cubes of size 50 mm - 200 mm can be tested, Cylinders 100 mm x 200 mm ht.& 150 mm dia. x 300 mm ht. can be tested.      Note : You can get Digital Readouts in all Machines cap. 250 KN to 3000 KN.

EN 12390-4, ASTM C39, AASHTO T22, IS : 14858 (2000) Automatic Test Execution Set test parameters - including load rate and Press the start button The machine automatically starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically release the pressure upon specimen failure Save the test including data results and load-time graph (Optional) Dual stage pump assuring fast piston approach and precise test execution Test execution conforming to EN 12390-4, ASTM C39, AASHTO T22 Controllable pace rate from 1 KN/Sec to 10 KN/Sec. Inbuilt graph in the touch screen display. Auto stop and auto release after completion of each test. Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale. Soft platen-to-specimen contact and smooth load rate control from the very beginning of the ramp Allow remote verification of settings and performances. For easy debugging of unexpected malfunctions. Complete IP based controller. Working on 240V, 50-60Hz, single phase. Frame Four column high stiffness welded frame tested for stability. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens Series TM-042-AA fitted with 300 mm dia. platens which are suitable for testing cylinders up to dia. 150x300 mm and cubes up to 200 mm. Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request. Attachment for Paver block testing is available at extra cost. Safety Features Max. pressure valve to avoid machine overloading Piston travel limit switch (Extra cost) Emergency stop button Hardware 132,000 points effective resolution, touch screen graphic display 240 x 128 pixel, sampling rate 50/sec, large storing capacity on USB pen drive test data downloadable to PC, Ethernet port, real time management software (optional). Optional Accessories at extra Cost Dedicated Data manager PC software

2000 kN CTM both Digital & Analog operated (0.1 kN Display) Fully New conditions Purchase Year -2019

Features       The FIE Compression Testing Machine Incorporates design features to enable high accuracy testing with economy, speed & versatility.       Loading Accuracy as high as + 1%     Straining at variable speeds to suit a wide range of materials.     Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials     Motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.     High reading accuracy due to large size and design of dial.     Wide range of standard and special accessories, including load stabilizer.     Large effective clearance between columns enables testing of standards specimens as well as structures.     Simple controls for easy of operation.     Robust staining frame of an extremely rigid construction.     Safe operation ensured be means of safety devices.     Application :       FIE Compression Testing Machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted.         Principal of Operation :       Operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.     Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The piston of the dynamometer is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen.     Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.         Machine consists of :         Straining Unit      This consists of a hydraulmic cylinder and a table coupled with the ram of hydraulic cylinder, mounted on robust base. The cylinder and the ram are individually lapped to eliminate friction. The cross-head is connected to two screwed columns and is driven by a motor, for rapid adjustment of test height.     An elongation scale with a minimum graduation of 1.0 mm, is provided to measure the deformation of the specimen.     Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.     Control Panel :      The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.     Power Pack :     The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.     Hydraulic Controls :     Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of table movement.     Load Indicator System :     This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.     Pendulum Dynamometer :      This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer  system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.     Autographic Continuous Roll Load-Elongation Recorder :     This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10.A continuous roll of graph paper is stored inside the drum and is easily replaced.     Accuracy & Calibration :      AII FIE Compression Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828. An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.    

Interested buyers can place orders with us, timely delivery of the same are our foremost concern. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts.