Jagdamba Enterprise Iskcon Temple Road, Vadodara, Gujarat

Precise Split — very low hold-up, High power solenoid, 35 gpm model, Automatic controller, Only one moving part, Fail-safe design, Adaptable to any size column, Interchangeable, Easily maintained

The Model 100 and 101 standard in-line flanged sight flows incorporate all the features shown on the front cover of the Sight Flow Indicator section and are available in 316 stainless steel (wetted parts) or carbon steel. Pipe line sizes are available up to 20 inches. Our Model 101 has face-to-face dimensions to match other manufacturers (specify when ordering.)  

Retractable Shaft (Specialised design for CIP) These rotary vacuum dryer give drying, mixing and breaking effects simultaneously. Wet cake or slurry is fed through charging door, while the agitator is rotating in clockwise direction, vacuum is applied in the dryer and heating media is circulated in the jacket. Evaporation of moisture takes place under vacuum and vapors passes through the dust catcher into the condenser, where it is condensed and collected in the receiver. Dried material is discharged through discharge valve. The lump breaker rods are provided to achieve good drying effect. This is a high efficiency dryer unit used for drying of wet cake product after filtration. This equipment can be used in drying process of various Pharmaceuticals, Intermediate Compounds, Fine Chemicals, Chemicals, Agro Chemicals, Pesticides, Insecticides, Dyes and Food Products.

Specialities : High quality mixing with reduced mixing time,Best suited for sticky, lump forming materials

This series of check valves was developed for use on fluids compatible with the corrosion resistant characteristics of virgin PTFE. The body of the valve is made from a combination of ductile iron and steel.  

The PTFE lined relief valves were developed for use on systems requiring the corrosion resistance compatibility offered by PTFE. The operating principle is the same as used in our regular line of corrosion resistant relief valves made of borosilicate glass.  

This series of check valves was developed for use on fluids compatible with the corrosion resistant characteristics of virgin PTFE. The body of the valve is made from a combination of ductile iron and steel.  

This is a multi-utility equipment which is a combination of filter and dryer unit in single equipment to achieve economy in process, space, energy, Labour and cost, thereby improving profitability.This equipment also reduces the validation documentation, which is very critical and cumbersome in Pharma industry, since it helps reducing the number of equipments downstream.

This product is Mainly Used In Industrial Refrigerating Treatment So That The Matrix Of The Metal Structure Generates a Uniform, Fine And Dispersed Precipitation. The Precipitation Of Carbide Will Improve The Abrasion Resistance,Friction Performance And Increase Hardness Of Metal. Carbide Is an Ideal Alternative To Liquid Nitrogen. For the copper sleeve and bearings contracting, it is widely used in precise mechanical assembly. It can be applied to variety of large scale equipment(cars, large engineering machineries, aircraft component, Aerospace equipment parts, Military equipment parts etc.) for their specific lower temperature test.   Overview         Microcomputer control, cascade temperature controller, digital temperature display, the regulation of unit 0.1℃, inside the temperature range -20 ℃ ~ -125 ℃ adjustable. Multi-safety protection, more reliable operation. France TECUMSEH compressor, Germany DANFOSS compressor, EMERSON compressor, automatic cascade refrigeration technology. With self-diagnosis function, freezer overload protection, high pressure switches, overload relays, thermal protection device and other security functions, and fully guarantee the use of safety Three sealed mold layer of insulation, Extra-thick high-density polyurethane foam insulation layer, the effect of good insulation;Inline vacuum insulation panels Human design, more convenient and flexible. Suitable for mechanical producing plant use. Large condenser design, fully guaranteed plant environment cooling effect. Wide volume ratio design, large load capacity design. Can be set to open compressors and compressor off temperature. Fault alarm (over-temperature alarm, sensor alarm, high alarm, overheat alarm compressor. Delay boot protection. So grounding components safely. LED display, clear display inside temperature and the desire temperature; can set the overtemperature alarm and the inside temperature, fault prompt functions Non-standard sizes can be customized, Ultra-low temperature freezer (can be produced within -100℃ 100 cubic). Optional equipments: PLC controller, color touch-screen, temperature recorder etc.

Brand Name : Jagdamba Enterprise

Number Of Flower : refrigerators chillers

Certification : ISO

Saving resources;closed cycle pipeline design, highly prevent circulating liquid pollution and extend the lifetime of circulation liquid. Multi-safety protection,easy operation. Human design,more convenient and flexible. Efficient two-condensate system. Computer-cascade temperature controller, temperature figures display, adjust unit is 0.1℃. PT100 temperature sensor. Can set the temperature difference of compressor on/off. A variety of fault alarm (overtemperature alarm, sensor alarm, high pressure alarm, compressor overheat alarm, liquid level alarm). Power on delay protection. All parts are safety grounding. High-performance circulating pump, can guarantee 24 hours continuously running a day

Sanitary Level Gauge   The Model 100 and 101 standard in-line flanged sight flows incorporate all the features shown on the front cover of the Sight Flow Indicator section and are available in 316 stainless steel (wetted parts) or carbon steel. Pipe line sizes are available up to 20 inches. Our Model 101 has face-to-face dimensions to match other manufacturers (specify when ordering.)

It is mainly used for scientific research, special materials of low temperature test and preservation; freezing of red blood cells, white blood cells, skin, bacteria, semen, biological products, ocean products and electronic components; special glue, special materials low temperature preservation and test. It is mainly used in blood stations, hospitals, health and epidemic prevention departments, research institutes, electronics industry, chemical medicine, biological engineering, laboratory, military industrial enterprises etc.

The splitter is electrically operated by a timer and a solenoid which provide accurate control. Reflux splitters facilitate measurement and control at a single station, streamlining your system. The precision timer has an adjustable ratio of 1:1 and 1:120 seconds. This timer is available in general purpose or Class 1, Group D enclosure.

Features         With self-diagnosis function, freezer overload protection, high pressure switches, overload relays, thermal protection device and other security functions. Use the French compressor Tecumseh, filter drier Danfoss, solenoid valve Emerson, expansion valve. LED display, clear, easy to operate. Succeed in making the temperature decrease successively. The liquid container is made by stainless steel, the volume is very suitable. Adopt the environmental refrigerant to meet environmental requirements without using fluorine. Multi-safety protection, more reliable operation. Use the pump stir up to make the temperature in the container uniformly. The function of correcting the temperature. Independent automatic overheat preventive device.

UC series with function from high temperature to cooling process, from 300°C~50°C. Equipped with heating cooling container,with large heat transfer area,fast heat-up and cooldown, small heat transfer oil demand. Can heat-up and cool-down continuously. The whole cycle is full closed,there is no oil mist at high temperature,heat transfer oil can not be oxidized and browning. With function of internal PT100 for correcting internal circulation. The whole system is closed with expansion tank,the expansion tank and liquid circulation are thermal insulation,do not participate in liquid circulation,regardless of high or low temperature,the medium in expansion tank is limited to 60°C.

The whole system we adopt is fully closed piping design, high efficiency plate heat exchanger used to reduce the demand of thermal fluid as well as greatly increase utilization of heat in order to achieve rapid ups and downs in temperature. The system with an expansion vessel, and the heatconducting medium in the expansion vessel does not participate in liquid circulation, whatever the temperature is high temperature or low temperature, the expansion tank is limited to 60°C. The working life and properties of the thermal fluid are also protected, by avoiding direct contact between the hot fluid and atmosphere.     Overview Working temperature rang from -100 °C to +300 °C. Centralized control of 3~20 reactors, each reactor’s material temperature and jacket temperature can be set independently. One system control multiple reactors of target temperature is realized. Maximum process stability and reproducibility. Under the system control, energy-saving efficiency is improved.The freezing medium and heating medium flowing through the conduction angle of the reactors are controlled accurately. Previously unachievable performance. High-accuracy and intelligent temperature control. Adopt Plate heat exchanger & Piping heater to improve the heating and cooling rates. High Cooling Power from 0.5 to 400 kW. Factory’s existing refrigeration system and heating system can be used together with this system in order to reduce the input cost. Large temperature range without fluid change. Increased thermal fluid life. 10 inch TFT touchscreen with graphic display. Comprehensive warning and safety functions. Rapid cooling down from high temperature (from 300 °C). Using Magnetic drive pump with no leakage of the shaft seal. With USB interfaces, RS485 interfaces, industrial control configuration software. It can be produced explosion-proof function according to customer’s requirement.

This completely new concept of relief valve seat construction provides a pressure seal of the seat to plunger. The sealing pressure increases as the inlet pressure builds up. This is accomplished by the lip on the inside diameter of the seat pressing against the side of the plunger.  

After-Sales Service Provided : Engineers available to service machinery overseas

Country of Origin : Can be provided with offer

Total Carbohydrate : 12 months from shipment

Condition : New

Structure : Tube Heat Exchanger

Maximum Working Pressure : Can be provided with offer

Liquid Flow Rate : Can be provided with offer

Certification : CE, cGMP OR similar as per requirement

A fully closed piping design, high efficiency plate heat exchanger used to reduce the demand for the thermal fluid utilization while providing the system to achieve the rapid ups and downs in temperature The whole system is a closed liquid circulation system with the expansion of container, expansion of the container and the liquid circulation is adiabatic, and do not participate in liquid circulation, only mechanical Only the heat conduction medium in the expansion container touches the oxygen in the air. (The container temperature is limited to 60°C). No volatilization of the heat conducting medium at high temperature. No need to change the heat conducting medium.Continuous control of the temperature of the below range can be done without rising the pressure: -80°C~190°C, -70°C 220°C, -88°C 170°C, -55°C 250°C, -30°C 300°C. Typical Applications Reactor Systems Autoclaves Pilot Systems Mini Plant Systems Scale up for Operational Development Double wall reactors Advanced-Flow Reactors Distillation Systems Material Testing Combinational Chemistry Semiconductor Industry Vacuum Chambers        

Theory : Temperature Controller

Application : Industrial

Accuracy : Can be provided with offer

Temperature Range : -100°C to +350°C

The splitter is electrically operated by a timer and a solenoid which provide accurate control. Reflux splitters facilitate measurement and control at a single station, streamlining your system. The precision timer has an adjustable ratio of 1:1 and 1:120 seconds. This timer is available in general purpose or Class 1, Group D enclosure.  

We have unique medium-sized low-temperature freezers with refrigeration temperature range from -5°C to -150°C. It is a completely safe, reliable and a rapid cooling for the liquid which is widely used in petrochemical, medical, pharmaceutical, biochemical and freeze-dried, military and other high-tech industries.   Features         Temperature ranges from – 5 ~ – 150 degrees. According to the product selection; our models can meet different temperature. Adopt environmental protection refrigerants. Famous brand semi-closed piston compressor, semi-closed bipolar piston compressor, semihermetic screw compressor, main brand are BOCK. Bitzer, Copeland, Hanbell, fusheng Plate heat exchanger, Small volume and High efficiency. Top imported cold controller(DANFOSS pressure controller, balance valve, expansion valve, solenoid valve, filter drier, Emerson oil separator, ALCO liquid mirror, check valve, etc.). Generator cooling water circuit use intermediate heat exchanger, improve system reliability and safety. DANFOSS electronic expansion valve, high precision control. Adopt Siemens PLC S7-200/300, LNEYA touch screen, automatic control, temperature curve display, temperature record U disk, fault alarm. Large cooling capacity adopts semi-hermetic screw compressor, electronic expansion valve control, high efficiency and energy saving. Offer machine installation and system test, users only need to finish the installation of refrigerant and cooling water. Factory testing: each refrigerating unit is on load test of not less than 12 hours in the factory.