Precision Gauges Dealers in Vadodara

Features Dial Size : 50, 63, 100 & 150 mm. Bourdon, Movement & Block : Non ferrous. Accuracy : ± 2%. Pressed Steel Case & Cover Connection : 38" BSP. Ranges : 1 kgcm2 to 600 kgcm2 with psi scale, -760 mmhg (Vacuum) and compound ranges

Dial Size : 40,50,63,100,150 mmRange  : 0……Vaccume to 700 Kg/Cm2 and above on your request Connection : 1/8" , 1/4" , 3/8" , 1/2" BSP Mounting : Bottom , Surafce , Back, Panel with hole and Bracket etc..

Determination of the flakiness and the elongation index for the given aggregate sample.   This test is used to determine the particle shape of the aggregate and each particle shape being preferred under specific conditions.   The significance of flakiness & elongation index is as follows: The degree of packing of the particles of one size depends upon their shape. Due to high surface area to volume ratio, the flaky and elongated particles lower the workability of concrete mixes. Flaky and elongated particles are considered undesirable for base coarse construction as they may cause weakness with possibilities of braking down under heavy loads. BS-1241 specifies a Flakiness index not exceeding 30% irrespective of the aggregate size. Maximum permitted Elongated index is 35, 40 or 45% for aggregate sizes     2 ½’’ – 2’’, 1 ½’’ – ¾’’ & ½’’ – 3/8’’. Both Flakiness and Elongation tests are not applicable to sizes smaller then 6.3mm i.e. ¼’’ sieve.

The meriGauge® plus is a break-through digital pressure gauge with modular sensors. This new gauge is Meriam’s latest offering in the pressure measurement line. The meriGauge® plus is unique in that it features the capability to support detachable sensors to meet all of your range requirements. This modular system allows you to purchase only the pressure ranges you need, for less than the cost of a stand-alone pressure gauge. To add to the efficiency of this gauge, the small sensors contain the calibration and they are easily exchanged for recalibration so the gauge itself is never “out for recalibration.” The meriSense sensors have been specifically designed to compliment this product and will be compatible with all of Meriam’s future measurement and calibration equipment. They are available in various types and ranges. The sensor label indicates the type of range. The meriSense sensors support 32 pressure units.

Size (Inch) OD (mm) 10 (3.025) 12 (2.64) 14 (2.03) 16 (1.62) 18 (1.21) 20 (0.91) 22 (0.71) 14” 6.35 0.075 0.070 0.065 0.058 0.046 0.037 0.030 516” 7.93 0.114 0.105 0.089 0.079 0.060 0.048 0.038 38” 9.52 0.152 0.135 0.113 0.097 0.080 0.058 0.046 12” 12.7 0.226 0.200 0.157 0.134 0.105 0.079 0.063 34” 19.05 0.386 0.326 0.256 0.215 0.161 0.124 0.097

We are offering Manifold Pressure Gauge in the market. Our Manifold Pressure Gauges are extremely functional and durable. These Manifold Pressure Gauges are well known in the market for their accuracy and sturdy construction. Manifold Pressure Gauges, offered by us, are fit for measuring different pressure range. One can avail these Manifold Pressure Gauges at competitive prices.

MODEL: ETM 2 / ETM 2DL Features PC compatible with memory of 1000 readings Auto / Manual calibration option Variety of probes for different applications

Reflex Level gauges are designed to operate based on the difference in the refractive indices of Liquid and vapor. Liquid Flows through the gauge chamber behind the viewing glass located on only one side of the instrument and which is clamped to the gauge body. When liquid is present the glass will Appear black where it is in contact with the process medium and when no liquid is present the Glass is silvery or white thus the level can be seen. SPECIFICATION Range: 0- 3000 mm Maximum Pre & Temp: 220 Kg/cm2 & 400 ºC Liquid Chamber: CS, ASTM A 105, SS 304, SS 316L, Monel, Titanium, Inconel 600, Hastelloy Cover: CS, ASTM A 105, SS 304, SS 316L Gasket & Cushion: IFG 5500, CAF, PTFE, Graphoil SS316 reinforced, Graphoil SS304 Glass: Toughened Borosilicate Size 115, 140,165,190,220,250,280,320,340 Options: Frost Free Extension, Mica Shield, NACE Wetted Part, Heating Jacketing, Cooling Jacketing, Scale, Type of Isolation Valve Type of Model: PERL-30, PERM-85, PERH-170, PERHH-220, PERLC-28, PERW - 120 APPLICATION High pressure and temperature, Storage tank, Chemical plants, Process and Power plants, Boiler Drum Level and Process Heaters, Chemical / Fertilizer plants, Bulk Carriers, Applications for viscous coloured and interface liquids

Utility Pressure Gauges are available in 40, 50, 63, 80, 100, 150 & 250mm dial size. These are specially designed for valve positioners, airfilters & regulators, small boilers, fire extinguishers, pharmaceutical & food processing equipments, pumps, compressors, hydraulic & pneumatic systems, ammonia & refrigeration services.   Specification :   Dial size: 40mm, 50mm, 65mm, 80mm, 100mm, 150mm & 250mm Accuracy: + 2% of f.S.D. Bourdon tube: brass / phosphor bronze / S.S. 316 Movement: brass / S.S. 304 Socket: brass/S.S. 316 Case: mild steel / S.S. 304 Mounting: direct with bottom entry / direct with back entry / flush panel with back entry (three hole panel or bracket type) / surface with bottom entry Thread connection: 1/8", 1/4", 3/8", 1/2"    bsp/bspt7 npt (m) Window: glass / polycarbonate. Joints: S.S. Bourdon tube tip and the socket ends are argon arc welded and phosphor bronze bourdon tubes are silver brazed / soldered. Bourdon tubes are heat-treated and stress relieved.

We are offering low cost differential pressure gauge. Features  mounts in industry standard holes   accuracy 2%   die cast aluminum housing  applications  filter status   duct static pressure   clean room pressure   building pressure   fan and blower pressure   paint booths   dust collectors   glove box pressure   bubbler systems   cabinet purging  specifications pressure limits: -20”hgto15psi(-0.677 bar to 1.034 bar); mp option: 35 psi (2.41 bar); hp option: 80 psi (5.52 bar) media compatibility: air and compatible gasses accuracy: +- 2% full scale (+- 3% on -0 and +- 4% on -00) throughout range at 70°f (21°c) temperature ranges: 20° to 140°f (-7° to 60°c) housing material: die cast aluminum case and bezel, with acrylic cover process connection: 18”femalenptduplicatehighandlow pressure taps –one pair side and one pair back. Weight: 1 lb 2 oz (510 g), mp & hp 2 lb 2 oz (963 g) accessories: two18”nptbarbedfitings,two18”npt plugs, and three mounting tabs and screws.