Flow Sensors Dealers in Chennai

• Brand Name: Biometric
• Application: BMC Flow Sensor
• Country of Origin: Made in India
• Accuracy: +/- 8% reading
• features: Accurate, Low Pressure Drop, Fast Response Time, Long Durability
• Operation Temperature: +/-15 to +40 degree Celsius
• Added Resistance: less than 2.5 mbar
• Connection: Gold plated 4 pin
• Flow range: 0 to 160 SLPM
• Measurement Principle: Constant temperature wire hot anemometer
• Pressure Range: +/-100 mbar
• Storage Temperature: 20 to +40 degree Celsius
• Packaging Type: Box

• Brand Name: GE
• Country of Origin: Made in India
• Model Number: R860
• Media: Liquid
• Flow Range: 0 - 200 litre per min
• Height: 3inch

• Material: Plastic, Metal
• Accuracy: 0. 5% FSD
• Working Voltage: 4. 5 to 24 vdc
• Max. Pressure: 17. 5 Bar and High Pressure
• Working Pressure: 0 to 10 Bar and High Pressure
• Max. Rated Current: 8 Ma
• Withstand Current: 15 Ma
• Working Temp.: Up to 120 Deg. C
• Storage Temp.: 25 to 65 Deg. C
• Humidity: 35% to 90%
• Pulse Number: 3900 pulses/litter
• Pulse Output Protection: 50+/-10%

• Working Voltage: 4.5 to 24V DC
• Max. Pressure: 8 Bar
• Working Temperature: Up to 120°C
• Pulse output Protection: 50 ±-10%
• Storage Temperature: 25 to 65°C
• Max. Rated Current: 8 mA

• Features: Optic or magnetic measuring principle

The paddle wheel flowmeter for continuous flow measurement is especially designed for use with neutral, slightly aggressive, solid free liquids in its magnetic measuring version and for use with liquids which let pass the infra-reds in its optic measuring version.

• Output: 1 to 5 V DC
• Type: Mass Air Flow Sensor
• Application: Medical
• Flow Rate: 300 SLPM/s
• Accuracy: 4 %
• Maximum Pressure: operating pressure 15 PSI
• Operational Mode: Bidirectional
• Supply Voltage: 6 to 16 VDC
• Port Size: Fitting: 22 mm medical connector per ISO 5356 5
• Brand: ACT Sensors
• Part Number: AS40 SERIES
• Compatible for: Air medium in medical

• Accuracy: 0.5% FSD
• Material: POM
• Working Voltage: 4.5 to 24V DC
• Max. Pressure: 8 Bar
• Working Pressure: 0 to 5 Bar
• Max. Rated Current: 8 mA
• Withstand Current: 15 mA
• Working Temperature: Up to 120°C
• Storage Temperature: 25 to 65°C
• Humidity: 35% to 90%
• Pulse output Protection: 50 ±-10%
• Pulse Number: 2400 Pulse Per Litter

In order to ensure the safety of the products, we carefully store the lot under hygienic conditions and safe environment. Moreover, the lot is stringently and regularly checked by the experts. To maintain optimum product environment, we use superior grade packaging material that is nontoxic. The labels on packs provide products details clearly and are smudge-proof. Our Thermal Mass Flow Sensor is capable of instant response and is easy to operate.  

• Brand Name: Biometric
• Application: BMC Flow Sensor
• Country of Origin: Made in India
• Operation Temperature: +/-15 to +40 degree Celsius
• Accuracy: +/- 8% reading
• Added Resistance: less than 2.5 mbar
• Connection: Gold plated 4 pin
• Flow range: 0 to 160 SLPM
• Measurement Principle: Constant temperature wire hot anemometer
• Pressure Range: +/-100 mbar
• Storage Temperature: 20 to +40 degree Celsius
• Packaging Type: Box

• Type: Liquid Flow Sensor
• Material: Plastic
• Application: Industrial
• Operational Mode: Bidirectional
• Supply Voltage: 5 V DC
• Flow Rate: 0.5 to 25 liter / minute

• liquid flow measurement: 600 ml/min (36 l/h)

Type 8708 is an instrument for liquid flow control in process technology. The actual value supplied by the sensor is transmitted through the digital electronics and over a standard signal output or a fi eld bus interface. In the device two calibration curves can be stored, which the user is able to switch between.

• Brand Name: R S Enter
• Accuracy: 2 %
• Storage temperature: - 20 to +40 Degree Celcius
• Pressure Range: +/- 100 bar
• Operating temperature: +15 to +40 Degree Celcius
• Features: Maximizes conveyor throughput, Reduces maintenance costs by preventing belt slippage, Increases the conveyor belts service life, Reduces loading time, Increases efficiency by optimizing belt capacity, Simple installation, Low maintenance costs, Offers sav

• Accuracy: +/- 2% of FullL Scale
• Type: Full Bore Turbine
• Pressure Drop: 0.3 kg/sq.cm at Max.flow
• Bearing: Ceramic
• Impeller: Polypropylene
• Fluid: Water
• Housing: GF Nylon
• SG of Medium: 1
• Pin or Shaft: Carbide / Ceramic
• Sensing Element: HallL Effect I.C.
• Maximum Temperature: 50 deg C
• Maximum Pressure: 5.0 kg/sq.cm
• Cable Length: 3 mtr.Shielded (STD.)

The HI3001 is a potentiometric sensor, utilizing four-ring technology to achieve accurate EC measurements. The four-ring technology allows for a wide range of measurement with a single probe as compared to amperometric two-pole probes that have a limited range and can suffer from polarization effects. The platinum sensors are protected by a PEI cover that can easily be removed for quick maintenance.   Internal Temperature Sensor The integrated NTC temperature sensor of the HI3001 probe is crucial for accurate EC measurements. Since the temperature of a solution can drastically change the amount of conductance, obtaining a fast and stable temperature measurement allows for an accurately compensated EC reading.   Threaded Connection The ½” front NPT threaded connection of the HI3001 allows for flow-thru mounting, while the ¾” back threads allow for submersion or pipe mounting without the need for additional hardware.   PVDF Body Polyvinylidene fluoride (PVDF) is a plastic that is resistant to most chemicals and solvents. It has high abrasion resistance, mechanical strength, and resistance to ultraviolet and nuclear radiation. PVDF is also resistant to fungal growth.   Multiple Cable Lengths The HI3001D models feature a DIN connector for use with Hanna’s HI99XX series of wall-mounted controllers, along with varying lengths of cable.   HI3001D comes with a DIN connector and 3 meters (9.9’) of cable attached. HI3001D/5 comes with a DIN connector and 5 meters (16.4’) of cable attached. HI3001D/10 comes with a DIN connector and 10 meters (32.8’) of cable attached.

The lowest rated working voltage: DC4.5 5V-24V Maximum operating current: 15 mA (DC 5V) Working voltage range: DC 5~18 v Load capacity:  10 mA (DC 5V) or less  Use temperature: 80 Degree   or less Operating humidity range: 35%~90%RH (no frost) Allowing pressure: pressure 1.75Mpa Temperature: -25~+80 ° c External threads: 1/2" Kept under the temperature: - 25 ~ + 80 Degree   Keep humidity: 25% ~ 95% RH Attention: Taboo water or water vapor into the circuit board Apply to water heaters, credit card machines, water vending machine, and flow measurement device.

Flow Sensor, Industrial Sensor, Connection Box, Vision Sensor

flow sensors, Inductive Proximity Sensor, Pressure Sensors

mass flow sensor, air dry tester, Air Leak Tester, Flow Tester

Flow Sensor, Electronic Card, Frequency Converters, Microprocessor board

air flow sensors, Sensor & Temperature Controllers