Civil Engineering Test Equipment Dealers in Odhav, Ahmedabad (11 products available)

• Application: Soil Testing
• Weight: 2 Kg
• Color: DA Gray
• Power: Electronic
• Body Material: Mild Steel
• Brand Name: DM
• Fall Frequency Of Soil Disc: 120 Beat/ min
• Usage: Determine the Moisture Content

Motorised Model: With consists of a brass cup held on an adjustable bracket. The bowl can be adjusted for a fall raised & dropped on a rubber of standard hardness by cam action. Complete with one casagrande-grooving tool, one ASTM grooving tools and a height gauge block. With counter. Fitted with a motor geared down to give approximately 120 RPM. Suitable for operation on 230 Volts, single phase, 50 cycles, A.C. supply. Relevant Standard: IS : 2720 (Part-V)    

• compressive strengths: 100-700Kg/cm
• specification: piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent

Our organization is involved in providing a qualitative Pile Integrity Tester to our customer. These test are performed by pulse echo or Transient Response Method used to test piles integral in the structure. Pile Integrity Tester is available in several configuration to meet the needs of the customer. It provide high quality services to our esteemed clients.

• capacity: 5 kg/1gm or 2 kg/0.1 gm

Used for the measurement of resistance to plastic flow of cylindrical specimens of bituminous paving mixtures when tested in a marshal load frame. Test specimens are produced and tested at a speed of 50.8mmmin.The maximum load(stability) and deformation(flow) of the specimen are recorded. Generally the test is applicable to hot mix designs using bitumen and aggregate of maximum size of 25mm. Widely used for designing and evaluating bituminous paving mixes. Comprising of a hard wood block with a steel plate, complete with specimen holder, semi circular base and a circular top to hold 4” dia specimen mould in place during compaction of the specimen. (Pedestal to accommodate 6” dia specimen can be supplied at extra cost), Flow meter Dial Gauge with 0.01mm graduation and 25mm travel.

• Brand Name: KJ
• Triaxial Cells: 38mm and 50mm dia
• Size: 50 Kn ( 5,000 kgf )
• Digital Timer And Counter: YES

• Voltage: 230
• Material: SS
• Display Type: DIGITAL
• Scale Value: 1 TO 100 KG
• Power: DC
• Size: 1 TO 25 MM

• Dimensions: Cm.
• Bottom diameter Top diameter Height: 20 10 30

Introduction The oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.     The device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight.   General Descriptions & Specifications The apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter X 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.     The mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows   The Cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle.   Optional Accessories CONCRETE SCOOP.FUNNEL FOR POURING CONCRETE IN CONE STRAIGHT EDGE

The apparatus, consist of a rigid frame that supports two conical hoppers vertically aligned above each other and mounted above a cylinder. The top hopper is slightly larger than the bottom hopper, while the cylinder is smaller in volume than both hoppers. To perform the test, the top hopper is filled with concrete but not compacted.

Soil Testing Equipment, Digital Comparators

Slump Cone, Tower Hoist, Rotary Type Electric Sand Screening Machine