Civil Engineering Test Equipment Dealers in Mumbai (76 products available)

We are a renowned Manufacturer, Exporter & Supplier of Digital Penetrometer. The Digital Penetrometer is manufactured by our team of skilled engineers as per IS: 1203-1978. The Digital Penetrometer offerd by us is widely demanded all across the world because of its strong construction, reliable performance, excellent efficiency and high functionality. Clients can avail the Digital Penetrometer from us at competitive price. Use : Used for the determination of penetration of asphaltic bitumen and fluxed native asphalt and blown type bitumen, Petroleum wax & jelly Construction Bath Unit consists of container of specified dimensions, needle, transfer dish, water bath Inner of SS outer powder coated finish with motorized stirrer to maintain desired temperatureCooling & heating arrangement controlled by a digital temperature controller cum indicator with PT100 sensor, electrically operated plunger, penetration indicator and timing device Digital penetrometer with digital timer coupled with Electrical plunger to measure the penetration in mm by digital penetration indicator in mm is also available in our stock

This equipment is specially designed for testing of the porosity of lacquer / wax which is internally coated on metallic (aluminum) tubes as per ISI std. The coated tube is filled with test-solution containing copper sulphate and copper electrode is immersed in this solution. The tube itself makes contact with the cathode and fixed small D.C. potential is then applied between the sliding top copper whose flow is proportional to the areas of the surface not covered by internal coating. In addition visual indication is provided by deposition of copper if coating is not continuous

• Material: Plastic
• Frequency: 40 - 50 Hz
• Weight: 1 Kg
• Display Type: Digital
• Battery: 3000 MAH

• Color: Silver
• Standard: ASTM F963 4.8, EN-71 1998 8.14, ISO 8124
• Certification: Traceable to NABL Certification
• Testing Type: Durability
• Inspection Type: Production Inspection
• Standard: IS 9873 Part 1
• Weight: 500 grams
• Light colour: Red

To determine whether accessible sharp points on toys are likely to cause injury. If the accessible sharp point penetrates a specified depth into the small rectangular opening of the tester, the LED is illuminated to indicate that the point is unacceptably sharp. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.Dimensions: 112× 16× 16mm; Weight: 80 gAccessories: weight, batteries, bulb 1piece.   Toy Safety Testing Sharp Points Testing Type Durability Type Of Toy Plastic Test Location By Samples in Lab Inspection Type Production Inspection Other Criteria Checks Random QA Certification Standards Type 16 CFR 1500.48, ASTM F963 4.8, EN-71 1998 8.14, ISO 8124 Minimum Order Quantity 1

• Type: Fashion Bangles
• Material: Metal
• Shape: Round
• Color: Black
• Feature: Attractive Designs, Finely Finished, Shiny Look, Unique Color
• Finishing: Polished
• Coating: Black Oxidized
• Occasion: Festive Wear, Party Wear, Wedding Wear
• Style Type: Jewellery
• Country of Origin: India
• Brand Name: Shree Jagdamba Bangles
• Gender: Female
• Bracelets or Bangles Type: Bangles Type
• SKU: SMB30001
• Size: 2/4, 2/6, 2/8

• Material: Stainless Steel, Aluminum, Copper, Nickel, Inconel, Titanium
• Brand Name: Gamma Solutions
• Size: Standard
• Length: 25 mm, 50 mm
• Material Grade: SS304, SS316 etc.
• Features: High performance, Accurate functioning, Application specific design
• I Deal: in new only

• Brand Name: Baby Master
• Material: Cotton
• Color: Assorted colors & prints
• Model Number: 590-3274
• Place of Origin: Mumbai
• Name: Baby Cap Booty mitten set

We are offering baby master presents this cute set of cap-booty mitten set made of 100 % bio-finish silicone washed cotton fabric .our cap, mittens and booties will keep your baby warm and cozy all day long. We make as per the buyers requirement and specifications

• Features: Concrete Rebound Schmidt Hammer NOVOTEST SH has 3 modifications with different impacting energy, so that user can test all kinds of concrete and other building materials
• Measurement accuracy, %: 10
• Hardness value of impact plunger working surface, HRC, no less: 60
• Surface roughness of testing object, Ra um, no worse: 40
• Radius of impact plunger, mm: 25
• Operating temperature range, oC: -20 … +50
• Weight of the device, kg, no more: 1
• Gross weight of package, kg: 1.7

• Certification: CE Certified
• Weight: 100-500kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric

Now purchase Leakage Testing Machine at highly affordable prices from us. We are its well-known supplier in the country. In our well-constructed warehouse, we store the entire lot under safe conditions and away from various damaging factors such as direct sunlight, moisture, dust, rain and others.

• Driven Type: Electric
• Made in: India
• Material: Steel
• Phase: Single Phase
• Frequency: 50 Hz
• Usage: Used for Determination of Softening Point of Bituminious Materials

Regrett. Want Buyers detail

• Size: Multisize
• Material: Glass
• Application: Milk Storage
• Feature: Food Grade
• Sealing Type: Screw Cap
• Shaping Mode: Round

• Max.distance between grips: 700mm
• Displacement resolution: 0.1mm ( by scale)
• Accuracy: 0.4% of F.S.

The H.D.T V.S.P Apparatus offered by us is widely used as Heat deflection Testers and Vicat softening Point. This apparatus is essentially used to test the variations in the temperature & softening point of the specimen used. Available in various models with a number of stations, these apparatus are manufactured as per the ASTM D 1525 & D648 standards.

• Soiling Measurement Kit |15 Watt PV Panels: Soiling Loss Measurement
• Soiling station interface module: 5-15 Vdc: Soiling station interface module and the amplifier power for the Isc measurement:Max 2.5mA
• RNRG Solar Resource Assessment System using SymphoniePRO Data Logger: PCB Temperature: -40C to +65C Temp Probe and adhesion Temperature: -40C to +85C
• 0 to 100% Corrosion resistant UV resistant: IP Rating  Interface module: IP55 when installed in a standard Symphonie Shelter Box | FRP

SOILING MEASUREMENT KIT Quantify the site-specific impacts of soiling on prospective and current PV projects with NRG's Soiling Measurement Kit.   NRG’s Soiling Measurement Kit provides users with the information needed to quantify the site-specific impacts of soiling caused by snow, dust, and other particles on prospective and current PV projects. These data are used to improve pre-construction annual energy production (AEP) estimates as well as maintenance schedules (i.e., panel washing) and forecast models in the post-construction setting. The Soiling Measurement Kit interfaces with the SymphoniePRO Data Logger via its interface module, which provides four 0 V to 5 V (analog) signal outputs: Temp CLEAN Isc CLEAN Temp SOILED Isc SOILED The interface module requires a single 12 V excitation (EXC) and ground connection (GND) available from any combination of built-in logger channels (16-19) and P-SCM channels (20-26). P-SCM channels require P-SCM item 9132.  BENEFITS • Determine site-specific soiling loss characteristics with this turnkey soiling measurement solution.• Install easily as an accessory to NRG’s SRA System – complete with PV modules, pre-installed back-of-module temperature sensors, flexible mounting hardware, and integrated soiling interface module.• Measure short circuit current and back-of-module temperature with user’s choice of statistical interval as well as optional 1 Hz sample data collection for flexible analysis options to meet data demands.   IN THE BOX Three (3) 15W PV panels (data logger power, dirty panel, clean panel) Two (2) back-of-module temperature sensors One (1) interface module (in shelter box) Related mounting and wiring components  

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material.

Bath Unit consists of container of specified dimensions, needle, transfer dish, water bath Inner of SS outer powder coated finish with motorized stirrer to maintain desired temp. With cooling & heating arrangement controlled by a digital temp. Controller cum indicator with PT100 sensor, electrically operated plunger, penetration indicator and timing device. Digital penetrometer with digital timer coupled with Electrical plunger to measure the penetration in mm by digital penetration indicator in mm is also available in our stock.

In geotechnical engineering, the Stress Path Triaxial Tests System is the laboratory test most commonly used to determinate the stress-strain relationship of a soil, in order to obtain reliable soil parameter information for a wide range of geotechnical problems and soil types. With the manual equipment the operator must follow a test step-by-step; adjusting the pressures via the adopted panels and regulators and opening and closing triaxial cell valves. To make the effective stress testing procedure much quicker and easier, a fully automated, computer controlled system is developed. Stress Path Triaxial Tests The laboratory triaxial stress path tests allow the engineering to replicate the changes in stress conditions experienced during excavations, constructions or natural events. Specific stress conditions as compression and extension loadingunloading, k0 consolidation, can be recreated with this type of test. In the automatic systems, the different stages of effective stress and stress path triaxial tests are automatically set up and managed via closed loop servo-pneumatic or servo-hydraulic high technology devices.

• Condition: New
• Adaptor plate: 200 mm dia hole
• Durability: High
• Corrosion Resistant: Yes
• lead screw movement: Stoppable at any point
• Availability: Depends
• Plunger Adapters: 38 mm, 75 mm, 100 mm, 150 mm diameters specimens

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material. The time is displayed on screen. The time of flight and the velocity of sound in the material are correlated to estimate the mechanical strength of concrete.Applications• Non destructive strength measurement of in situ or precast concrete.• Crack & Void detection.• Determination of Homogeneity of concrete.• Elastic property measurement of concrete.• Infrastructure Checking.• Construction Testing.• For Research Purpose.• For Students Practical(Civil/Mechanical Engineering Colleges).• To Test Wood,Rocks and similar materials using suitable probes.• To Check Railway Path.• Old Building Strength Check.Features• Compliant with International Standard BS-4408 (Part V – 1974) and ASTM C-597.• Light weight, easy to operate.• Range up to 5 meters using suitable probe.• Fast, Reliable results.• Computer compatible.Additional features for 4600M • LCD display.• Direct velocity measurement.• RS-232 output.• Memory for calibration & measurement data.• Curve fitting for mechanical parameters Vs Velocity Correlation. Additional features for 4600G • Large Graphic LCD display.• Bidirectional data transfer with PC.• Elastic Mode for elastic constant measurement with special probes.• All other features of 4600 M.

The machine comprises of a hollow cylinder, which is horizontally mounted on a strong frame on ball bearings.Abrasion testing machine is used to test crushed rock, crushed slag and uncrushed gravel for resistance to abrasion. The machine determines the resistance to wear of small size coarse aggregates and crushed rocks.

• Dia: 8.5 cm x 12 cm

This apparatus is meant for determination of softening point of bituminous materials. The Apparatus consists of a Glass Beaker of Heat resistant Glass of Internal Dia 8.5 cm x 12 cm Depth (Approx.), Two steel balls each of 9.5 mm Dia, Two Tapered Brass Rings, Two ball Guides, Ring Stand and a hand stirrer.

• Country of Origin: Made in India
• Weight: 500-600 kg
• Capacity: 200 Ton
• Frame: Four Pillar Model
• Mode of operation: Electric cum Hand Operated

Vertical Height Adjustment up to 250 mm (Normal Distance 180 mm) Horizontal Distance Adjustment from 150 mm to 250 mm (Normal Distance 180 mm) Spring Constant: 25 N / mm Motorized arrangement to adjust dropping height = 40 mm Digital pre-counter is provided to count the number of drops