Soil Testing Equipment Dealers in Mumbai

As per IS 2720 (Part VII) - 1980. Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of 3 mm Dia.

Microprocessor water and soil analysis kit for measurement of pH, conductivity, mv, TDS, Salinity, D.O. & temperature 16X2 Alphanumeric LCD Display, Battery cum mains operated with all accessories fitted in an briefcase. Data storage facility up to 1000 samples and external printer attachment facility available, computer interface through USBRS232.

Bath Unit consists of container of specified dimensions, needle, transfer dish, water bath Inner of SS outer powder coated finish with motorized stirrer to maintain desired temp. With cooling & heating arrangement controlled by a digital temp. Controller cum indicator with PT100 sensor, electrically operated plunger, penetration indicator and timing device. Digital penetrometer with digital timer coupled with Electrical plunger to measure the penetration in mm by digital penetration indicator in mm is also available in our stock.

14 Nos. Easy to attach and detach `Press Fit’ wobble free Stirrer shafts with removable Paddle basket assembly.14 Nos. Unbreakable clear MOULDED Dissolution Vessels or Glass Vessels.Motorized sensor tray to measure individual vessel temperature, can be programmed to move as per set time.Equipped with very reliable maintenance free stepper motor drive for stirrers.Tablet dropping system.Sampling tray with 6 probes can be programmed to move as per set time.

Unique Features : Extremely Compact Construction Long Lasting Vacuum Pump Polycarbonate Vacuum Dessicator Stainless Steel (GMP) Construction           Vacuum Level now Upto 25” of Hg It’s the most ideal “ LEAK TEST” instrument for checking Blister Packs, Strips and Pouches. It makes the conventional dessicator with a huge vacuum pump, obsolete. The Vacuum Pump ensure that a high level of vacuum is created in the shortest possible time. And the die-pressed, polycarbonate vacuum dessicator sustains the vacuum for a long time. A vacuum gauge is provided to indicate the vacuum level. This is connected to the isolation valve which helps disconnect the source, thereby avoiding the need for running the vacuum pump continuously. While it’s amazing compactness saves valuable space in process laboratories and timer helps the operator attend to other chores at a time.

The unit consists of a Acrylic tube connected to a tank. At entrance of tube a bell mouth section is provided and at the other end a valve is provide to control the rate of flow. A capillary tube is introduced centrally to the bell mouth to inject die. By varying the rate of flow the Reynolds number changes. This also changes type of flow. Visual observation of die (thread) will indicate the type of flow which can be confirmed from the REYNOLDS number computed. FEATURES Steady flow arrangement Very clear flow visualization Fine control of die thread. Accurate flow measurement & control.   SPECIFICATIONS Acrylic tube (transparent) 25 mm OD / 20 mm ID of 1 meter length. Main Tank - 400X400X700 mm Constant Supply tank of 200x200x 200 Flow control valve. Dye tank and syringe Measuring Flask & stop watch for flow measurement.   RANGE OF EXPERIMENT To determine the Reynolds number & hence the type of flow either laminar or turbulent. To determine upper & lower Reynolds number & velocities.

Used to obtain quickly and easily an approximate measure of the shear strength of cohesive and semi cohesive soils. The special feature of this model is the design of the penetration rod, which allows a relatively deep penetration into the soil (up to 6 cm) thus reducing errors and uncertainties typical of shallow measures, which are often affected by remoulding, drying, etc.Three different sizes of penetration tips are available: the small one for hard soils, the medium one for soft and medium soil, and the large one for soft soil.

Soil Testing Kits with reagents for estimation of ph, phosphorous, Potassium, Nitrogen (Nitrate & Ammoniacal) & Organic Carbon (Code-Kit C/O) For 25 Soil Samples   Soil Testing Kits with Fibre Glass Reinforced Plastic (FRP) Cabinet, Borosil Glass Test Tubes for estimation of pH, Phosphorous, Potassium, Nitrogen (nitrate & ammoniacal) Organic Carbon, Reagent Sufficient to carry out 25 tests (code - kit F/O)   Special Soil Testing Kit, with reagent for estimate of pH, Phosphorous, Potassium, Nitrogen (nitrate & Ammoniacal) Organic Carbon,(Code Kit 100 ST) for testing 100 soil Samples   Soil Test Kit for 50 Nos Test Ech for pH, Nitrogen, Phosphorous, Potassium & Organic Carbon, Model STK - 50 B   The Kit Can be Used to Rapidly test Soil for Following 5 Parameters Parameter Range Tested by Kit No of Tests a) pH 4.5, 5.0, 5.5, 6.0 6.5, 7.0, 7.5, 8.0, 8.5, 9.0 50 b) Nitorgen (N) (Kg/ha) 140, 280, 420, 560, 700 50 c) Phosphorus (P) Kg/ha) 7, 14, 21, 28, 35 50 d) Potassium (K) Kg/ha) 100, 150, 200, 250, 300 50 e) Organic Carbon (%) 0.2, 0.4, 0.6, 0.8, 1.0 50   KIT For ACIDITY of TRANSFORMER OIL,as per IS   KIT For Estimation of IODINE in Common Salt (NACL)   HORROCK'S APPARATUS   Simple Bacteriological Water Testing KitComplete with kerosene heated small chamber to maintain temp.at 35ºC ( Manually Operated )Complete with electricity heated chamber with automatic control   Water Testing Kit Complete,useful for NGO Centres,School & Colleges : Tests possible with the kit : physical parameters : Colour,Odour,Temperature,Turbidity,Suspended Solids.Chemical Parameters : PH, Alkalinity , Dissolved Oxygen , Hardness , Calcium , Magnesium Chloride, Fluriode , Nitrate,Ammonia, Phosphate,Total Iron,Residual Chlorine, Biological Parameters : Estimation Of total Coliform,Estimation OfPrimary Productivity ,Estimation Of Water quality using Benthic macro-invertebrates   CHLORINE TEST KIT For determination of Residual Chlorine in water, Range : 0.1 to 5.0 PPM , SUMITRA , Deluxe