Soil Testing Equipment Dealers in Bangalore

Leak test apparatus made out off ss 304 Quality argon arc welded comprising a Cylindrical vessel and ss lid provided with Gasket and ss wing nuts for locking. A glass window provided at the top enables easy Viewing inside. A vacuum gauge with two control valves one For charging and one for releasing vacuum Vacuum pump for the above is required.

We are offering ductility testing apparatus, ductility testing apparatus: in flexible pavement construction, bitumen binders are used. It is important that bituminous material forms ductile thin film around the aggregates that serves as a binder. The binder material not of sufficient ductility renders pervious pavement surface and leads to development of cracks. Therefore it is important to carry out the ductility tests on bituminous material. Ductility is defined as distance in cms to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a rate of 50mmminute ±25mm per minute at a temperature of 27ºc ± 0.5ºc. specifications: the apparatus consists of a water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature one half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch the motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1mm fixed on the bath with “0” (zero) of the scale towards the fixed plate side the rotating shaft has 2 speeds of travel for the bracket, 5 cmmin and 1 cmmin., selected by a clutch water bath inside is aluminum, it is an insulated water bath water bath is provided with a drain a heater with thermostatic control is fixed inside the water bath control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath, complete with three briquette moulds and one base plate, all made of brass operates on 230 volts a.c. Single phase accessories: thermometer ip 38 c, range 23ºc to 27ºc ductility mould with base-plate.

Star automations provides complete solutions for the support and maintenance of high value electronic Printed Circuit Boards (PCBs) and modules.We are an electronic engineering company specializing in component level Repair with Automated Test Equipment.

Get Ahead with the best ATE test solutions from testamatic. Our integrated solutions comes from over 75 years of multi-industry expertise. With 100+ successful projects behind us, you can expect great test automation features, bed of nails fixtures, ergonomic designs with small footprints.

Perfectly Balanced Load Cell arrangement with frame and HX711 interface ready to use with nay of the microcontrollers.  

We offer our customers a range of functionally advanced Slump Cones that are manufactured with precision. Our full range of products is of durable nature and high tensile strength.   We are one of the leading manufacturers and suppliers of compressor testing machines that find wide application in the construction industry. These machines are used to test the particular compressive strength and the sample of cubes or concrete cylinders by applying a load through this machine. We offer portable models that are very useful and convenient for transporting specimens to sites instead for testing in a standard laboratory. Supplied with special accessories, the machines can also be used safely for bricks. The machine has a load chassis with suitable plates and is equipped with a pumping unit with manometer. The machine operates manually or operates electrically according to customer requirements.   Characteristics: 1) Easy to use and Useful for hollow or solid concrete blocks (using a suitable capacity machine). 2) The pressure pipes connect the load chassis and the pumping unit.

Applications: Resistance to flame and ignition test on insulating material such as CFI outer insulating material, HID lamp cap insulating parts etc System Features / Technical Data: The heating element is made of Nickel/ Chromium (80:20) wire, 4 mm in diameter The temperature sensor is made of a sheathed fine wire of Cr/ A1 thermocouple resistant to a temperature of 1000 C Self adjusting current source is used to heat the Glow-wire up to preset temperature A microprocessor based PID temperature controller is used to control temp of glow wire. (Range: Ambient to 960C, Resolution: 1°C Accuracy: 1% Display: 4 Digit Red LED) Microprocessor based digital timer is used for pre-setting the test duration (Range: 0.1 999scc) with audio alarm to remove the test sample from the glow wire tip Digital time interval meter to record the burning time of the sample Glow wire penetration into the sample can be limited mechanically Provision to press the sample towards the glow wire tip with a force of 1 Newton In Auto models motorized forward and reverse motion for the movement of specimen with additional manual jog switches Automatic start of the test and draw back of the sample after the pre-set test time with a single press button Manufactured confirming to IEC, BSS and IS specification.

It is specifically designed for disintegration testing of tablets, suppositories, capsules and other solid dosage medications. It complies with USP,BP, JP requirements.

We have a complete devout in developing highly demanded Foundry Sand Testing Machine. We bring forth the highly versatile and next generation equipment that is widely acclaimed for its maintenance free design. The offered equipment is fitted with innovative components and demanded widely for measuring the permeability number of sand.

Vicat Softening Point Apparatu