Soil Testing Equipment Dealers in Goregaon East, Mumbai

As per IS 2720 (Part VII) - 1980. Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of 3 mm Dia.

Complies with USP, IP and Ph. Eur. specifications Parking of the baskets at the top position at the end of the test with alarm Green illumination from bottom for better visibility Programmable timer with dual range in min-sec, hrs-min and in continuous mode Snap-click loading and a swivel free baskets movement Maintenance free smooth drive

Gmp-gc-85 digital penetrometer: microprocessor based unit provides automatically timed operator programmable penetration measurements • conforms to all is,astm, ip, iso 9001 and related specifications possible user groups are: adhesives, airports & aviation, asphalt, automotive, beverages, bitumen, chemicals, confectionery, constituent, cosmetics, fats, food, lubricant, mastics, motor vehicles, paraffin, penetration, pharmaceuticals, plastics, polishes, soap regulatory authorities, road research, rubber, tar, various, wax unit tests the consistency of lubricating greases, petroleum waxes, bitumen’s, pastes, creams and other solid to semi-solid products, including a variety of food products. Microprocessor control provides a full range of measurement and reporting options. The penetrometer defaults to the standard astm interval of 5 seconds “or” 60 seconds “or” as per choice. All selected parameters are retained in memory and automatically repeated in subsequent tests until changed by the operator. Penetration measurements in the full range of 0-400 “or” 0-600 in 110th of mm scale “or” 1100th of mm are reported directly in digits. If a test result falls outside of the programmed range, an audible signal and visual error message alert the user of a failed sample. It is incorporated with motorized placement of rack on the penetrated plunger carrying needle & locks the reading once it touches tip of the plunger-head with auto-positioning of rack at its home position for subsequent next measurement. It is also coupled with electrically operated plunger solenoid coil to activate release of plunger shaft as per set duration of time. For precise placement of tip of needle to the specimen sample surface, the unit is coupled with jack for updown movement.the height of the whole assembly (rack &pinion ,plunger with electrical coil etc)can also be adjusted & fixed for test-run results can be communicated to a printer or computer via a built-in rs232 interface (as

A 19mm vane blade is screwed in to the base of the Geovane and the vane is pushed into the soil. Simply rotate the Geovane at a rate of 1 revolution per minute and take a reading off the face when the soil fails. A pointer stays in place when failure occurs so all you have to do is look up the reading from the face on the supplied calibration chart to get your reading in kPa.

SLUMP TEST APPARATUS. Complete with Slump Cone having 100mm Dia Top x 200mm Dia Bottom x 300mm Height, octagonal shaped Base Plate with Swivel handle and Bakelite Bolt-knobs & 'L' Shape steel clamps and Tamping Rod of 16mm Dia x 60mm Long with 0-30cm Graduation.

Dissolution Test Apparatus, Laboratory Oven