EOT Crane Dealers in Ahmedabad

We are counted among the trusted Manufacturers, Suppliers & Exporters of Single Beam Goliath Crane. We offer high-grade Single Beam Goliath Cranes that are manufactured as per international quality standards and are thoroughly tested before they are dispatched to our clients. Our Single Beam Goliath Cranes are appreciated for their high performance and durability. Our range of Single Beam Goliath Cranes comprises of indoor Single Beam Goliath Crane & outdoor single Beam Goliath Crane. Features : Application specific design Consistent performance Heavy load caring capacity Easy to operate Robust construction Low maintenance High efficiency Longer service life Range Available : 1t. Cap. Single Beam Goliath Crane 2t. Cap. Single Beam Goliath Crane 3t. Cap. Single Beam Goliath Crane 5t. Cap. Single Beam Goliath Crane 7.5t. Cap. Single Beam Goliath Crane 10t. Cap. Single Beam Goliath Crane

We provide power - master goliathgantry cranes to our customers that are designed in accordance with is: 807 & is: 3177 standards. These goliath cranes are similar to those of overhead cranes except that the bridge for carrying the trolley or trolleys is rigidly supported on two or more legs running on fixed rails or other runway.

We are considered as major manufacturer and supplier of finest quality overhead e.o.t. crane. It is suitably used for all kinds of material handling need of varied industries. It is used to lift and move the objects from one place to other place. Our eot cranes move easily on antifriction ball bearing. We stringently follow international norms and conditions for the manufacturing of overhead e.o.t. crane.   It is provided with twin drive arrangements. It is made confirming IS-3177 and its lifting attachments; hoists are designed as per IS-3938. Structural steel parts are made as per IS-226 relevant standard. It contains specially designed motor for eot crane duty. Motor is designed confirming IS-325. Trolleys are provided with drive motors and AC/DC brakes.

We offer single girder eot cranes. Single girder eot cranes are designed and made in accordance with the duty classification as per is-3177. These single girder eot cranes are known for providing cost-effective solutions due to their low dead weight. Electric overhead traveling cranes are designed and manufactured with adequate factor of safety in compliance with the is-807. Moreover, these cranes provide greater floor coverage than any other type of cranes. We are looking for queries mainly from gujarat, maharashtra, delhi, rajasthan, chennai, and kolkata. Other details: 1. Used for heavier loads and longer spans 2. Offer advantage of low headroom 3. Selected for crane duty applications

A crane mechanism is lifted to goods and equipment to move parallel for both up and down. Cranes for transporting to play a big role, lift heavy stuff and move to other places.     Safal 13 is an Ahmedabad based prominent Crane Manufacturer and suppliers of EOT Cranes, HOT Cranes, JIB Cranes, Gantry Cranes, and other custom cranes, with over 3 years of designing and manufacturing experience in Gujarat, India.     We manufacture and export a range of material handling equipment cranes as per Indian standard IS 807, 3177, 3938 & 4137, which assures the quality of the product.     Safal 13 is the most important thing to consider in manufacture and design for cranes. (i) The crane must be able to lift the weight of the load (ii) the crane must not topple (iii) the crane must not rupture.     We offer material handling equipments like low-cost cranes and wire rope hoist to meet your requirements and budget.     We provide high quality huge range of Crane such as:   EOT Crane (Electric Overhead Travelling) Single Girder EOT Crane Double Girder EOT Crane HOT Crane (Hand Operated) Jib Crane Gantry Crane Electric Wire Rope Hoist Goods Lift Transfer Trolley Cranes Spares   Cranes used in such as:   Automobile industry Pipe mills Power sector Shipbuilding Industry Heavy engineering industries Transportation industries Construction including high buildings, flyovers, roads, bridges and tunnels Steel industry Woolen Mills logistics

VGOR brand Electrically Operated Overhead Travelling Cranes are designed & manufactured in accordance with IS: 3177 and IS: 4137. The structural parts of the cranes are designed in as per with IS: 807 and IS: 800. Our cranes are manufactured with standard components and controls to ensure reliability.The single girder design, in general preferred up to 15T capacity and span of 20M, is made from either rolled steel I-beam with C-Channel capping section on top for lateral stiffness or box section fabricated from plate. The rolled steel section girders, even though widely used, are ultimately limited by the availability of beam size and length. The distance from the hook at the top most position to the top of the gantry is often greater than in double girderdesigns, although low headroom hoists can minimize this limitation.   STANDARD FEATURES:  VGOR cranes have high quality structural assembly.  VGOR cranes have minimum maintenance.  Easily adjustable imported brand limit-switches.  Load tested to 125% and certified by VGOR from tests undertaken in our own workshops. RANGE OF SPECIFICATIONS:  Safe Working Load: 500 kgs to 50,000 kgs  Span: 30 mtrs  Height of Lift: As per customer specifications  Class of Duty / Standards: M5 to M8 as per IS 3177 / IS 807  Speeds: As per clients’ specification / application.  Crane Control: From floor through Pendant Push Buttons, Optionally through Radio Remote Control / cabin with master control  Drive System: Twin Drive through Squirrel Cage Induction Geared Motors with built-in fail safe brakes  Motors: Squirrel Cage Induction Crane duty motors, IP 55 enclosure, S4 duty, 40% CDF  Brakes: ACEM / DCEM disc type brakes, optionally Shoe type brakes for hoist & LT motion  Power Supply System: To Hoist and Cross Travel through C-Rail Cable system / Cable Drag Chain To Crane through Shrouded Bus Bars / Trailing Cable / MS Angle Iron Conductors / Bare Copper Conductors (depending on customer's choice and application)

Accurate Engineers Crane Manufacturers manufactures EOT cranes ranging from 500kg to 500t and above. Our range of EOT cranes includes Single girder EOT, Double girder EOT, Under slung EOT and Light weight cranes. Accurate Engineers Crane Manufacturers specializes in providing total customized solutions for our client’s material handling requirements, helping you choose the perfect EOT crane for your requirement. We provide material handling solutions through all types of overhead cranes and lifting equipments along with service support to make sure our customers are satisfied. For heavy duty applications Accurate Engineers Crane Manufacturers. cranes can supply fully customized double girder EOT cranes as per your requirement for different duty cycles and for a diverse range of applications. Customized EOT cranes such as those with rotating crabs have also been successfully executed by us. Precise and convenient control on up –down motion along with safe traverse motion is achieved by fitting variable frequency drives in the electric panel. Advanced pendant push button station or a radio remote control ensures a smooth and safe operation. Today Accurate Engineers Crane Manufacturers. Is India’s largest overhead cranes manufacturer by volume. With installations across a wide spectrum including the Automobile industry, Shipbuilding Industry, Power sector including Nuclear power plants numerous small scale industries; Accurate Engineers Crane Manufacturers. cranes has made a mark. Range: All Type of eot crane Manufacturers, Suppliers And Exporters

Production and Manufacturing Industry Fabrication Industry Leather or apparel factory Food factory Thus, if you are planning to purchase single or double girder EOT cranes from the market, the first name you should consider is Ganesh Engineering Co. Our company uses top notch products for the cranes and we assure you of perfect service.

MP Crane is engaged in manufacture and export of Single Girder EOT Cranes includes Material Handling EOT Cranes with capacity ranging from 1 ton to 50 ton. These single girder overhead cranes are fabricated by us keeping into consideration the Indian standards.Dimensionally accurate and functionally superior, these cranes are immensely used in diverse industries for material handling. Sturdily constructed, these cranes serve the application demands of different industries for a long period of time. Single Girder EOT cranes offer following advantages. Cost effectiveness solutions for optimum utilization of space High stability for very low dead weight Low load on the crane run way and building structure Maximum hook approach Outstanding travel characteristics ensuring safe and gentle handling Capacity : 1 Ton to 50 Tons Span : 5 to 35 meters

Safex Electromech underslung cranes are designed to run directly on gantry girders. Made to suite narrow headroom constraints or other building dimension restrictions, our underslung cranes offer unique solutions to factory lifting needs.

We are engaged in making available precision made Goliath Crane to our customers. The Goliath Crane is designed in accordance with IS: 807 & IS: 3177 standards. The Goliath Crane, that we provide, is similar to those of overhead cranes except that the bridge for carrying the trolley or trolleys is rigidly supported on two or more legs, running on fixed rails or other runway. Our offered Goliath Crane is known for its durability and high performance. Characteristics : Available in Single & Double GirderTailor made as per customer�s requirementBuilt tough to work in open yardsCapable to handling heavy loads Advantages : Easy to erectInvolves less structural investmentCan be installed in open or covered area

Single / Double Girder type Gantry / Goliath Cranes   Capacity : Single Girder crane up to 20 ton. Double Girder Crane up to 100 ton. Span : Up to 30 mtrs. Long travel speed : Up to 20 mtrs / min. Cross travel speed : UP to 15 mtrs / min. Used for outdoor applications – Ship yards, Construction area. Travel on rails are installed on ground surface. Cost effective – economical solution, No need to concrete foundations, runway beam and column   Design   CRANOIST electric overhead traveling cranes are designed & manufactured accordance with IS 807, IS 3177, code of practice for design, manufacturing, erection, testing of structural part of the crane and IS 3177 code of practice for design of overhead traveling crane. In the design of components adequate factors of safety as per relevant code is allowed impact, fatigue, wear and stress concentration factors are taken whenever applicable. All drives are designed to give sound & efficient performance.   Steel Construction   Structural steel are used in the manufacturing of crane conforming to IS 2062 or equivalent.   Bridge Girder   The bridge girder is fabricated from RSJ / Box type construction in the manufacturing. The maximum deflection of the bridge girder is limited to span / 1000 of the live loads. Bridge girder designed to sustain stress creating due to vertical & cateral forces with impact.   End Carriages / End Trucks   End carriages are fabricated from rolled steel section / plate with adequate diaphragms & stiffeners to give a rigid construction. The girder with the gusset plates are set on end carriages joined with bolt in rimmed holes, rubber buffer are provided on both the side of end carriages for abhorring the jerks. Twin drive arrangements will be provided for L.T. motions, central drive arrangement also available on request.   Hoisting Machine   The hoisting machinery / crab is designed with IS 3938 in modular construction which simplifies repair & maintenance consist of a CRANOIST heavy duty industries type std. wire rope hoist.     Controls   The crane is controlled from pendent push button station is suspended from one end of bridge at a suitable height from the floor level with stepped down voltage of 110v, 24v. Dust proof powder coated sheet – metal housing consists of contactors overload relays fuses, transformers etc. Emergency stop button in all cranes to shutting of the power to the main connectors.   Motors & Brakes   The motors used are specially crane duty suitable for frequent starting, reversing and braking in accordance with IS 225. All trolley are drive motors have suitable AC / DC / brakes as std. equipments with smooth running properties.   Optional Features   Following features shall be supplied on request. Micro speed arrangement through frequency inverters / variable frequency drives. Cable festooned system or shrouded bus bar system. Warming horn. Bridge lights. Cabin operated through master controller.