Futuristic Climate Controls Vastrapur, Ahmedabad, Gujarat

Y-type strainer is widely used in water application and is used for protecting valve and other equipments from scrap and impurities in the system. FEATURES Ductile iron body with epoxy coating Stainless steel filter screen

Size Range : DN50 to DN600

HONEYWELL GRANIT 1980I WIRED INDUSTRIAL FULL RANGE SCANNER   HONEYWELL Granit 1980i industrial-grade scanner features full-range area-imaging technology capable of reading both 1D and 2D barcodes across a wide range of distances from 15 cm (6 in) to 15 m (50 ft).Granit 1980i scanners is IP65 rated to withstand harsh environments.   FEATURES: Full Range Area Imaging Performance Efficient Wireless Performance Single Scanning Solution Built Granit Tough Easy To Use SPECIFICATION:   Dimensions (LxWxH): 133 mm x 75 mm x 195 mm (5.2” x 2.9” x 7.6”) Weight: 335 g (11.8 oz) Input Voltage: 4.0 to 5.5 VDC Operating Power: 2.35 W (470 mA @ 5.0 V) Operating Temperature: -30°C to 50°C (-22°F to 122°F) Humidity: 0 to 95% relative humidity, non-condensing Light Levels: 0 to 100,000 lux (9,290 foot-candles) Scan Pattern: Area Imager

Availability : 335 g (11.8 oz)

HONEYWELL XENON 1900 WIRED AREA IMAGING SCANNER   HONEYWELL Xenon 1900 Barcode Scanner is a sixth-generation of area imaging technology. It gives you faster scans, greater motion tolerance, and the best scanning experience for your business. It is available as a standard range, high density, or extended range barcode scanner. It is suited to fit a wide variety of industries or needs.    FEATURES: Custom Sensor Optimized for Bar Code Scanning Multiple Focal Options Image Processing Software 240 inch per second motion tolerance SPECIFICATION: Dimensions (LxWxH) 104 mm x 71 mm x 160 mm (4.1˝ x 2.8˝ x 6.3˝) Weight 147 g (5.2 oz) Input Voltage 4 VDC to 5.5 VDC Operating Power 2.3 W (450mA @ 5 VDC) Operating Temperature 0°C to 50°C (32°F to 122°F) Humidity 0% to 95% relative humidity, non-condensing Scan Pattern Area Image (838 x 640 pixel array)    

  The Series 629 Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability. Terminal block, zero and span adjustments are easily accessed under the top cover. The Series 629 Differential Pressure Transmitter is designed to meet NEMA 4X (IP66) construction.   DWYER WET DIFFERENTIAL PRESSURE TRANSMITTER 629 SERIES   The Series 629 Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability. Terminal block, zero and span adjustments are easily accessed under the top cover. The Series 629 Differential Pressure Transmitter is designed to meet NEMA 4X (IP66) construction. Ask a question about this product     DESCRIPTION APPLICATIONS: Monitor differential pressures across:• Flow elements• Heat exchangers• Filters• Pumps• Coils• Chiller

Accuracy : ±0.5% FS (includes linearity, hysteresis & repeatability).

output signal : 4 to 20 mA. Optional 0 to 5, 0 to 10 VDC.

Response Time : 50 ms.

Availability : 10.1 oz (286 g).

 CX Series switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The product’s o-ring seals make the enclosure rain tight, but are outside of required flame paths so explosion proof requirements are maintained. Unless special ordered, all basic switches operate on clockwise and counterclockwise rotation. The actuating mechanism can be field adjusted for CW or CCW operation only. No tools are required. Sealing - applicable portions of NEMA 1, 3, 4, 4X, 6, 6P, 7, 9, and 13 Watertight and dust-tight for outdoor use 4 mA to 20 mA analog output available UL Listed, file #E14274 Analog UL file #E68247 CSA Certified, file #LR57324 INMETRO certified Rugged, cast aluminum housing Pretravel, overtravel, and actuating sequence can be field adjusted without tools (all basics individually) Rotary types convert in seconds to clockwise, counter-clockwise, or both-way operation Potential Applications Control valves and actuators Petro-chemical plants Grain handling Waste treatment Hazardous waste handing Power generating Paint facilities

  honeywell watertight miniature basic switches v15w series is a miniature-sized basic switch designed for harsh-duty, wash down areas. Rugged yet precise, the series provides machine control for turning circuits on and off. The v15w can be used in a wide range of challenging environments and is designed for applications requiring electrical ratings from 0.1 a to 10 a. Standard in the v-size package, the v15w is watertight to an ip67 rating (with wired leads). Choose the v15w when you need accurate repeatability in a compact, lightweight, and long lasting basic switch. description the v15w series offers   value:rugged yet precise, the v15w product performance matches customer design expectations for compactness, accurate repeatability, and extended life, giving them flexibility in a wide range of washdown applicationscustomization:for design engineering flexibility, the v15w series features a variety of straight, roller, simulated roller, and special actuators to choose from (connectors on lead wires also available) many switch characteristics are available to create thousands of different potential configurationsreliability:designed specifically for challenging outdoor applications, the v15w gives repeatable and consistent performance within a range of conditionsenvironmental protection:able to operate under difficult environmental conditions, the micro switch™ v15w series is designed to work in watertight or sealed applications requiring greater than or equal to15g of operating force rated to ip67 (except terminal parts)industry-leading current capability:the only v-sized switch rated up to 10a! the higher rating allows the v15w to be used in a wider range of high current consumer and industrial applications.

DESCRIPTION Available in sizes 40mm to 300mm for flow rates of between 0.35m³/h and 2000m³/h, H4000 operates at temperatures up to 50°C and amaximum working pressure of 16 bar.

 Volumetric cold water meter's unique design offers an unparalleled blend of accuracy, durability and security. Available in sizes from 15mm to 40mm, with flow rates of between 3 7.5 l/h to 20 m/h.

Vane Flow Switch offers an economical flow proving solution. The FS-2 features an aluminum weatherproof housing for outdoor installation. Paddles are adjustable to fit 1˝ to 8˝ size pipe. FS-2 is ideal for use in “flow or no flow” applications in cold and hot water systems. Perfect for proving flow in boilers, hot water heaters, and chillers.

The relief valves are normally closed. The valves open as the inlet pressure rises above the calibration value. The valves close automatically when the pressure returns below the calibration value.  

The VR8204 AND VR4204 Intermittent Pilot Dual Automatic Valve Combination Gas Controls are used in gas-fired, intermittent pilot appliances.The controls include a safety shutoff, a manual valve, two automatic operators, a pressure regulator, a pilot adjustment screw and a conduit cover (VR4204 only). VR8204 used with S8600, S8610 and S8620 ControlModules.VR4204 used with 120 Vac intermittent ignition modules. VR8204 for use with 24 Vac heating appliances andVR4204 for use with 120 Vac heating appliances thatburn natural or manufactured gas, or liquified petroleum(LP) gas.Capacity rated at 150 cfh at 1 in. wc pressure drop [4.2 m3/hr at 0.25 kPa].Solenoid-operated first automatic valve opens on thermostat call for heat and closes when call for heat ends.Diaphragm-operated second automatic valve opens under control of the regulator and closes if gas or power supply is interrupted.Two-position gas control knob has ON and OFF positions.All adjustments and wiring connections are accessible from top of the control.Compact size.Straight-through body pattern; right angle adapters available for inlet and outlet.1/2 in. inlet and 1/2 in. outlet; adapters available for 3/8 or 3/4 in.

Honeywell UV Detector with 6' cable , Mounting 1"-11-1/2 NPSM Internal Threads, Amb. Temp. -18 to 121 C, Pressure Max. 5 PSI.  

  HONEYWELL Voyager 1450g(wired) Upgradeable Area-Imaging Scanner handheld scanners let you embrace area imaging at your own pace – and in the most cost-effective way. It  delivers omnidirectional reading of linear bar codes, plus the ability to affordably upgrade the device to enable PDF and 2D bar code scanning—either at the time of purchase, or as data capture needs evolve.     FEATURES: Mobile Phone Reading Future Proof Reliable Data Collection Go Beyond 1D Codes Flexible Licensing Solution SPECIFICATION:   Dimensions (LxWxH): 62 mm x 169 mm x 82 mm (2.4” x 6.6” x 3.2”) Weight: 130g (4.6 oz) Input Voltage: 4.0 to 5.5 VDC Operating Power: 2 W (400mA @ 5 VDC) Operating Temperature: 0°C to 40°C (32°F to 104°F) Humidity: Up to 95% relative humidity, non-condensing Scan Pattern:  Area Image (640 x 480 pixel array) Scan Angle: Horizontal 37.8°; Vertical 28.9°

CSLFB: The CSLF series of ultrasonic liquid flow transmitters are designed for use with building automation, energy management, and process control systems. Models include various sizes and connection types for liquid flow measurement. FEATURES Dual Sensor, Bi-directional 2 Field selectable ranges Loop-powered 4-20mA  Zero Pressure Drop Several pipe size available Choice of connection No moving parts No initial calibration  Plug 'n Play  DESCRIPTIONThe CSLF series ultrasonic liquid flow transmitters are ideal for the measurement of flow rates of acoustically conductive liquids including most clean liquids and many liquids with entrained solids.Main advantages include excellent long term stability, no pressure drop, no moving parts, broad fluid compatibility, high accuracy and low cost.At the heart of the transmitter is a proprietary mixed signal ASIC which allows sophisticated timing, control and transducer drive circuitry to be combined on a single integrated circuit. The ASIC uses a special algorithum that is an improvement upon the standard single-path measurement technique. Using the "sing-around" method, the ultrasonic transducer alternates between transmitting and receiving to measure differences in flight time between upstream and downstream transmissions. A sound pulse is transmitted from an upstream transducer towards a downstream transducer like a traditional time-of-flight measurement. However, the received sound pulse then triggers a second downstream transmission that then triggers a third and so on for a specific number of cycles. This process is repeated in the upstream direction.Because it takes an average flight time over multiple cycles to compute the difference in flight times, the approach yields a significant improvement in timing accuracy when compared with the time-of-flight difference of a single sound pulse in each direction. This algorithm, combined with the pico-second timing resolution of the ASIC, provides the precise time measurement capability necessary for compact, small diameter ultrasonic meters.The output of the transmitter is unaffected by changes in fluid temperature, density and viscosity as the flow calculation is independent of the speed of sound.Wetted materials include ULTEM® encapsulated ultrasonic transducers with a choice of elastomer seals and epoxy coated carbon steel body material.

Key Features & Benefits: • Plug and play• 0.4 - 2.0 V and digital UART outputs• Two-piece structure• Full-range calibration with PC or one-key calibration• Protection against incorrect connection

  SECURE METER Premier 300 transformer energy operated meter is the family ofCurrent Transformer/Voltage Trasformer operated meters covers a wide range of power levels and offers flexible time-of-use tariff metering and communications capabilities.     FEATURES:   CT/VT-operated industrial and commercial billing Transformer metering, boundary metering and substation monitoring Three-phase LV, MV and HV circuits

Thyristor - CD3000M 2PH 15A to 700A DC Logic/Linear, ZC/BF 24V to 600VAC Supply, DC Logic, 4-20mA, 0-10V DC linear or 10K potentiometer inputs. CD3000M-2PH is a digital and universal Thyristor unit fully configurable via serial communication port. A fully digital and universal Thyristor, configurable via RS485 serial communication port or dedicated configuration port for all inputs, firing & performance parameters. Configuration software available as a download at no cost. Overview: Two leg switching of three wire star or delta resistive loads  Suitable for loads up to 700A Microprocessor based electonic circuit fully isolated from power Universal input signal with automatic zero/span calibration Universal firing, customer configurable via serial port for zero crossing (ZC) and burst firing (BF) modes RS485 comms, MODBUS protocol included as standard Heater Break circuit microprocessor based to diagnose load failure and short circuit on Thyristors as option IP20 Protection

Special Features: Design as per PTC 19.3 These Thermowells are manufactured from solid bar stock and installed into the process with the help of threaded process connection. This design is suitable for all type of RTD’s, Thermocouples, mechanical as well as digital thermometers. Available in various shapes like Straight, Straight with reduced tip,partial taper & full taper.

The T1 series thermowell are available in 304 or 316 series stainless steel. They are available in a wide range of lengths. Custom lengths and materials are also available.  

Precesion Thermostats can provide either temperature control or over temperature protection by breaking electrical contact when specified temperature is reached.   Computers Medical electronics Power supplies Industrial controls Test equipment Infotech  FEATURES Hermetically sealed Tight tolerances Tight differentials

TM 50 thermostatic mixing valves provide control of the water temperature and are used: For centralised control on hot water supply units or for localised control adjacent to point-use outlets. Or for use with solar-heated hot water units with dual energy source. In heating systems with underfloor heating or for limiting boiler return temperatures. Where a system includes a hot water circulation circuit, a KB 191 return flow retarder unit (see accessories) must be fitted to prevent cold water backfeeding and cooling the mixed water at the outlets. Special Features! Highly sensitive thermal element with good all-round water temperature sensing, even at low flow rates! Simple setting of the required water temperature! Scald protection - the hot water inlet is automatically cut off if the cold supply fails provided that the hot water inlet temperature is at least 10 K higher than that of mixedwater setting! The cold water inlet is automatically cut off if the hot supply fails! Inner components are of scale-resistant materials! Complies with KTW requirements Range of ApplicationFlow medium: WaterOperating pressure Maximum: 10 barMaximum pressure difference between hot and cold inlet supplies: 2.5 bar

Honeywell digital thermostat, 220 vac, 2-pipe fan coil control, tf228wn honeywell thermostat.

Brand Name : Honeywell

 Temperature Transmitter

Brand Name : Greystone

output signal : 4 - 20 mA

Honeywell Wall Mount Humidity & Temp. Sensor With LCD Display,Output 0…10V, 4%RH , 0.3°C, -5°C to 55°C, Silver cover.