Industrial Control System Dealers in Nikol, Ahmedabad

When a VFD starts a motor, it initially applies a low frequency and voltage to the motor. The starting frequency is typically 2 Hz or less. Starting at such a low frequency avoids the high inrush current that occurs when a motor is started by simply applying the utility (mains) voltage by turning on a switch. When VFD starts, the applied frequency and voltage are increased at a controlled rate or ramped up to accelerate the load without drawing excessive current. This starting method typically allows a motor to develop 150% of its rated torque while drawing only 50% of its rated current. When a motor is simply switched on at full voltage, it initially draws at least 300% of its rated current while producing less than 50% of its rated torque. As the load accelerates, the available torque usually drops a little and then rises to a peak while the current remains very high until the motor approaches full speed. A VFD can be adjusted to produce a steady 150% starting torque from standstill right up to full speed while drawing only 50% current.

Combining the knowledge of Chinese and German engineers, Kinco servo and stepper drive products inherit the typical German symbols: high quality, high reliability and stability. Servo System comprises CD series, JD series, FD Series, and ED series.

We are counted as one amidst the supreme Computerized Control Cabin Manufacturers in India. The use of optimum quality materials in the manufacturing of the Control Cabin ensures high durability, tensile strength and resistivity to adverse conditions. Easy operation and low maintenance cost have also made Dust Proof Control Cabin ideal for different industrial applications.

Power factor correction panel(apfcrtpfc) • automatic power factor control panel are use to gain to unity pf in fluctuating loads. • we are manufacturing range of 30kvar up to 1000kvar apfc panel. • enriched with vast industrial experience, we are involved in manufacturing and supplying a qualitative range of power factor correction panels. • these are engineered from top quality raw materials which are procured from trustworthy vendors of the industry. • multistage controller, automanual controller, p.f. Closer to unitytargeted, thyristorcontractor switched, zero voltage switching as per controller, suitable for variable load. • we offered compartmentalisenon-compartmentalise panel special design for cooling of panel.

We are highly efficient in presenting a wide array of Control Panel to the clients. In synchronization with the set industry standards, offered products are designed using high grade material and top notch technology. Owing to their robust construction, these products are widely admired by our precious clients.

We manufacturer high end, high performance mcc panel boards. These panel boards have high efficiency and can also be designed as per customer requirement. These boards are available in different feature.

With the constant support of our dexterous crew of professionals, we are fulfilling the varied requirements of clients by offering optimum quality Panel Board. The offered panel is manufactured by our trained professionals by making use of basic components in adherence to set electronic industry norms. Moreover, it is checked for its quality on different stages of quality parameters before being supplied to our clients. Features : Low power consumption Easy to operate Long service life

We are one of the leading manufacturers and suppliers in India offering high quality Control panel accessories to our clients as per industry standards. Our products are well known in automation market because of its better service life, durability, functionality, and precision engineering. Our products are well tested on various parameters before they are deployed and dispatched to our business clients. Our products are well customized according to customers’ specification to make them more satisfied.

Power Control Centre Are Used For Intelligent Selection Of Transmitter Power Output In A Communication System To Achieve Good Performance Within The System. These Panels Are Used For Diverse Industrial Applications. We Are Engaged In Manufacturing PCC Up To 6300 Busbar Rating. These Panels Are Manufactured In Various Sizes Based On Client’s Specifications. The Panels Are Totally Dust And Vermin Proof. The Entire Panel Will Undergo Pre-Treatment Covering Decreasing, Water Rinsing & De-Rusting/Phosphating. It Will Be Synthetic Enamel Painted Or Powder Coated As Per Requirements.   Product Features: High Degree Of Flexibility Available With Provision Of Mounting ACB And Automatic Transfer Switch For The Incoming Supply Multitier Compartmentalized Vertical Bus For Two-Tier Feeders Up To 1600A Short-Circuit Rating Planned For 70KA Modular Design Extensible At Both Sides Arrangement For Receiving Supply Through Power Cable/Bus Duct Applications::   Process Industries: Dairy, Paper & Pulp, Pharmaceuticals, Leather, Sugar, Fertilizer Manufacturing: Automotive, Plastics & Chemicals, Electronics & Telecommunications Power Plants, Heavy Machinery, Infrastructure, Heating, Ventilation And Air Conditioning

Fully computerized control cabin with on board electrical power control console, distribution switch board, fully automatic process and sequence controls are a standard on our KEW series plants. A user friendly software gives you total reliability and ensures top notch performance. Fail proof interlocks and auto process controls Online fault detection Online printing facility Provisions to print, store and edit production details, mix proportions, etc. Display of all process control parameters Automatic, semi-automatic & manual operation The control of drum mix plants is equipped with function keys and numeric keys and does not require special skills for operation.

Our Power Distribution Panel are using in applications like power-distribution, control, ground-fault protection and monitoring. Apart from this, Power Distribution Panel also serves as alarm panel for freeze protection, broad temperature-maintenance and heat-tracing applications. These Power Distribution Panels are integrated with ground-fault circuit breakers in an enclosure having assembled circuit-breaker panel board with or without alarms contacts. Furthermore, equipped with the group control package, Power Distribution Panels have the capability of automating operation in conjunction with an ambient-sensing thermostat, individual electronic or duty cycle controller.

We provide a wide range of Changeover Panels using advanced machines and technology and strictly in accordance with industry standards. Extensively used for providing mains and generator power change over flexibility application, our range is manufactured using high quality raw material and advanced machines. We can also provide customized to meet the specific requirements of the clients.

Remote Control Electrical Curtain System, Wifi Door Lock Syste

Salient Features : Generator start/stop Monitoring and protection facilities Monitors availability of power and automatically starts the DG With fault in DG it trips the DG and indicates via LEDs/LCD Continuously monitors the status of mains supply Configurable via front panel feather touch push buttons Configurable solid state outputs Large number of configurable timers Continuous monitoring of three-phase voltage/current/frequency of mains and DG Along with battery voltage of DG Continuous monitoring of power supplies status from Electricity Board and DG Available with lightening and surge arresters

Conforms to International standards of electrical components and wiring. Star-delta starter with thermal protection to reduce in rush current to the motor during start up and smooth running of motor. All electrical control through MMI operation. A large mushroom emergency button for quick stoppage of compressor in an easy accessible location at operator level.

We are manufacturing complete range of  special panel as follow. Testing Panel. Rotogravure/Flexo Printing Machines Lamination Plants Slitting & Rewinding Machines for Paper, Foil, Metal Etc. Wire Drawing Re-rolling. Tube Mill Plant Textile Processing Machines. Packing Machines Seweage Treatment Plant.

1.Container with tinted glass windows at all sides. 2.Insulated, dust proof and air-conditioned. 3.Pre-wire electrical power and control panels along with console. 4.Depending on plant configuration, the power requirement may change. 5.All plant controls, PLC, switch gear and control gear are housed within the power and control panels. 6.All motors are rated IP55, class F insulation.