Industrial Control System Dealers in Bangalore

We are offering Lt Panels Outdoor/indoor upto 6000 Amps. Power distribution boards meter boards auto change over acl panels mcc motor control centres pcc power control centres (mechanical interlock bus coupler) amf auto mains failure protection panel liquid rotor starters control desks integrated control centres apfc automatic power factor control panels genset control panels manual or amf synchronizing bus ducts.

  AMF panel and generator packages are designed to provide emergency power during mains supply failure. During operation, the control panel of the AMF monitors the mains entering the building. If a mains failure occurs, the panel will disconnect the mains from the load, the generator is started and its output connected to the load. (The load being appliances, lights, etc in use within the house/office/factory at the time of mains failure). The generator continues to supply the building until the mains supply returns. The generator then automatically disconnects, stops and the mains is re-connected to the load. The AMF panel reverts to the standby mode ready to respond in case of another mains failure. Operation With the generator in 'Auto' mode, the incoming main is monitored continuously. If the mains voltage falls outside the preset limits, a 'mains failure' has occurred and the process of starting the generator set is initiated. Once the mains failure is recognised, the contacts are released to disconnect the load from the mains. The 'mains available' and 'mains on load' lamps extinguish. There is a pre-set and adjustable time delay before the generator is started. This avoids unnecessary starting of the generator when very short duration mains breaks occur e.g. 2 or 3 second breaks due to lightning strikes. After the delay, the engine fuel solenoid / ignition system is energised. A pre-heat period begins for generators fitted with indirect injection diesel engines. The choke is operated on petrol-engined sets. The starter motor relay energises and the engine is cranked for a pre-set period (typically 10 seconds). If the engine fires up and the speed increases through the 'crank-cut' threshold, then the starter motor is dis-engaged. Alternatively, if the engine does not start during the first crank period then the starter de-energises for an equal rest period before energising for another attempt. If the engine has not started after the last 'crank' period, then the engine fuel solenoid / ignition is de-energised and the generator is deemed to have failed to start and the appropriate annunciator is illuminated. Assuming that the generator has started during one of the attempts, the alternator output is checked to ensure that it is within specification. If so, then the generator contactor is energised and the load is supplied from the generator. In normal circumstances, the period from mains failure occurring to generator supply being connected is about 20 seconds. During generator operation, the engine oil pressure and temperatures are monitored and should an abnormality occur, the generator will immediately be shutdown and the appropriate annunciator illuminated. When the mains supply returns, the mains available lamp is illuminated within specified limits. The main is then monitored for a pre-set time to ensure that the supply is stable. The generator contactor is then de-energised and the mains contactor energised so that the mains supply is restored to the load. The 'alternator available' and 'alternator on-load' lamps extinguish and 'mains on load' lamp is illuminated. A short break in approximately 1 second occurs whilst the changeover is complete. The generator is 'run-on' for a cooling down period (adjustable up to 30 minutes) before the fuel solenoid / ignition system is de-energised and the engine stops. The operational cycle is then complete and the generator returns to a standby condition. During this time the starter battery is maintained in a charged condition by a 'trickle' charger supplied from the mains. 

It is a flat, vertical where control or monitoring instruments are displayed or an enclosed unit that is the part of a system that users can access, as the control unit of a system.

We are offering solar panel features……. long lasting variation in model durability we are one of the leading organizations engaged in offering a wide range of solar products, which is durable and is reckoned for optimum performance, robust construction and high efficiency. These are manufactured using quality tested raw material and are offered in varied specifications. Available at industry leading prices, these products are used in different industrial applications our company holds specialization in providing services of solar panel. We offer our services in various industries like electrical industry, automotive industry and many more. We make use of top quality steel for the fabrication process. We keep in mind the needs and requirements of the clients for offering our services. Our services can be availed at highly affordable prices. Http:www.finepunchfab.in20150920solar-panel-manufacturers-in-bangalore-finepunchfabpvt-solar-panel-manufacturersolar-panel-bord-in-bengalurusolar-panel-price-in-bangaloresolar-panel-bord-manufacturers-in-bangalorekarnatakaindiasheet metal fabricators cable tray and junction box manufacturers fine punch fab is sheet metal fabricators in bangalore. We manufactures pedestal storage lockers, cable tray ,tool racks,metal pallets, sheet metal enclosures, dustbin, metal pallets,acrylic laser cutting, lockers, ladders, conveyors, , junction box et cable tray,junction box,lockers,dustbin,pedestal storage lockers,sheet metal fabrication,heavy metal fabrication,metal container, sheet metal enclosure,metal pallets, machine guard,ladder,tool racks,safe lockers,storage racks,acrylic laser cutting,pallet cups

Dhumal'sPlatinum Plus and Junior Poultry House Controllersare a modular system which manages all aspects of a poultry house: climate, temperature, feed, weighing and ventilation. Designed for operations requiring a large number of relays, the Platinum provides a plug-and-play solution for growers wanting to invest minimal time in programming thecontroller. Alternatively, growers wanting to configure the controller to fit exactly their particular installation can set every detail. Platinum Plus and Junior Controllers feature Rotem’sPrecision Ventilation technology, an innovative technology that has revolutionized poultry house ventilation worldwide. Precision Ventilation features Dynamic Cruise Control, which automatically adjusts the ventilation system according to the changes in temperature, humidity and static pressure. The system takes into considerationthe wind chill factor, fan air capacity, minimum required ventilation according to bird weight, and the temperature differential between the two ends of the house. In doing so the Platinum provides: Optimal target temperature, humidity and CO2, Optimal air conditioning; reduced humidity & ammonia levels, Reduced heating & ventilation costs   User Friendly : Using a Platinum Plus/Junior is simple. The units feature a large LCD graphic display, and on-screen help and graphs. A Windows-based software package can be installed on any PC, enabling remote monitoring and control over the unit.     Platinum Plus/Junior Features : 16 independent heat zones Precise fogging and cooling systems Feed management with integrated overflow alarm and shutoff Current sensor for monitoring power consumption Low water pressure alarm Up to 80 heavy-duty relays Fail safe emergency relay Static pressure control Detailed alarm and event log Modular system to meet specific requirements Complete remote communication with real-time visual outlook Large LCD graphic display On-screen help and graphs Data plug for easy data transfer Large & friendly numeric keypad Smart On/Off/Auto override switches Battery backup option (12 V) SD card port to save history & update software   Functionality : A Platinum Plus/Junior provides the grower with a large variety of functionality: Digital inputs provide data on the feed count , water meter, feeder overtime, auxiliary alarm. 0 to 10 volt analog outputs enable control over light dimmers and variable speed fans. Growers wanting to control their feeding operations as well as collect the data needed to properly analyze their operations can connect the controller to bird, feed and silo scales. Full control via a PC (both locally and remotely) is possible by installing a communication card and by connecting the Controller to aRotem Communicator. An optional digital input/analog output combo card frees a card slot, thereby enabling even more functionality.

We offer motor control panels are efficient to carry heavy loads and come with multiple power stabs. They are known for supporting high capacity industrial motors. We are capable to manufacture mcc panels with any specifications provided by customers. Functioning : capable to feed larger loadscome with multiple power stabssupport high capacity industrial motors implemented with : ac variable frequency drivesnon reversing induction motorsdigital meteringfeeder protection breakerssolid state motor controllersfusible disconnects. Applications : cinema hallsmulti-complexesfactoriesmalls

We offer an excellent range of good quality electrical control panels. Our high quality & comprehensive Electrical Control Panels are rather prominent and popular, and are extensively used for supplying power to electrical motors and various other industrial equipments.   Standard and A.M.F.Panels are available from 5 KVA TO 750 KVA DG sets

Our company designs an exclusive range of change over panels, which are made of best quality raw materials to ensure durability and efficiency. Our change over panels serves various industries̢۪ requirements. These are used for changing over from DG set to mains and vice versa. The change over panels has the castle lock facility that prevents from accidental change over. These can take up to 415V and are provided with IP54 protection and fabricated as per IS standards. Characteristics : Can be changed to generator mode automaticallyWhen EB supply resumes it goes back to EB modeSwitches off the generator automaticallyShock proofDurableStrong and sturdyEasy to operate and install Applications : FoundriesApartmentsTextilesSugarChemical industries

HV Circuit Breaker Panels are manufactured to meet the customer specific requirement and our panels are type tested with Central Power Research Institute and meets the IS/IEC standard.  

What Are VOC’S ? : Volatile Organic Compounds ( VOC ), are generated in streams where oils are present in refinery and petrochemical effluents or streams. These normally consist of BTEX (Benzenes, Toluenes, Xylenes etc.), and other organic compounds which add to the odor and are now required to be controlled whereas they were previously vented into the atmosphere.VOC Control : All VOC generating points such as oil sumps, storage tanks for slop and feed oils, separator tanks like API’S, TPI’s, DAF systems, etc. need to be fitted with the VOC control system. This control may be either by Carbon adsorption and subsequent desorption, or by use of thermal oxidizer systems, to ensure that the vapors escaping from these units are controlled to contain the VOC’s.Carbon Adsorption : This is the easiest and most basic form of VOC control, wherein a particular grade of Carbon is chosen based on tests on the streams and on experience. The VOC’s are then passed through the Carbon bed to adsorb them and to ensure that the vapors coming out are harmless to the atmosphere. This is carried out in Carbon canisters or in Tanks, depending on the flow and the site conditions. Basically, a Fixed Bed or a Fluidized Bed option is possible.Thermal Oxidation : Popular for higher VOC concentrations, thermal oxidation will combust the VOC gases to achieve very high levels of purity of the vented air. Obvious advantages are non-replacement of the spent carbon bed.Advantages Of Nacahtech Systems Basic design of systems including estimation of nature and quantity of VOC’s provides comfort level for plant engineers/operators. Optimizing choice of Activated Carbon usage due to vast experience in the field. Saves initial costs, assures proper capture, and optimizes operating costs. Individually designed systems to suit particular applications depending on type and quantities of VOC ‘s. Optimizes costs and operation success. Equipment manufactured locally in India based on specifications and design by Nacah Tech to reduce total cost of system.   User list of Nacah Tech USAUser list of Nacah Tech / TIGG experience begins primarily with EIL/IOCL Panipat In India through NICCO Engineering, for ETP VOC control.Additionally - Amoco, Whiting, Indiana, USA - VOC control, burners Ashland, Pittsburgh, Pennsylvania, USA - VOC control, Thermal oxidizer, Service BP, Toledo, Ohio, USA - VOC control, Thermal oxidizer BP, Texas City, Texas, USA - VOC control, burners BP/Premcor Lima, Ohio, USA - VOC control, Thermal oxidizer Conoco, Ponca City, Oklahoma, USA - VOC control, burners Exxon, Baytown, Texas, USA - VOC control, burners, Thermal oxidizer Esso (Imperial Oil), Sarnia, Ontario, Canada - VOC control, burners Exxon Mobile (Chemicals) Baytown, Texas, USA - VOC control, burners, t.o. Exxon Mobile Beaumont, Texas, USA - VOC control, burners Bayer, Baytown, Texas, USA - VOC control, Thermal oxidizer Mobile, Chalmette, Lousiana, USA - VOC control, burners Monsanto/Solutia, Chocolate Bayou, Texas, USA - VOC control, burners, t.o. Monsanto, Rock Springs, Wyoming, USA - Emission Control, Service, combustion System Solutia, Pocatello, Idaho, USA - VOC control, Thermal oxidizer, APC Philips, Borger, Texas, USA - VOC control, burners Texaco, Port Arthur, Texas, USA - VOC control, burners, cogen Ultramar, Long Beach, California, USA - VOC control, Thermal oxidizer Shell/Exxon. Aruba - VOC control, burners Maraven, Venezuela - VOC control, Thermal oxidizer UEM, Barauni, IOCL India - VOC control, ETP Package

Electrical control panel board The special thing about these electric control panel boards is that these require least amount of maintenance and anyone could utilize their options. Control Panel Board is stringently tested on various quality parameters and is provided in accordance to the quality standards.