Industrial Control System Dealers in Kamakshipalya, Bangalore

We are the prime manufacturer and exporter of generator control panels, which are engineered by technical experts. The smooth functioning and reliable performance of our automatic general control panel has raised their demand in global markets. Designed to monitor & to start : generatorremote generator control panelmains sourcepartial or full failure of the sourcemain supply functions : control panel will provide a volt free contact outputstart signal to the remote generator control panelenable automatic start of the generatorsense the generator if it is running at correct outputtransfer switch of motor runs from the mains position to generator positiontransfer site loadreturn the mains source and after a time delay to allow for mains to stabilize applications : cinema hallsmultiplexesfactoriesmalls

Mahaveer Fire Safety is trusted by clients for supplying Fire Alarm Repeater Panel that is sophisticatedly designed by the experts. To cater to the diverse requirements of the clients, we supply, the Fire Alarm Repeater Panel in the market in varied specifications. The efficient performance of these Repeater Panels has earned us a huge list of clients in nationwide markets. MAIN FEATURES � Built in Power supply � Built in Buzzer - Audio Alarm � Mute Switch - To silence Audio Alarm � User friendly display - Back lit LCD (Liquid Crystal Display 4x20)80 Characters � LCD gives - Zone Number, Floor Number And Block details where exactly Fire is occurred. TECHNICAL SPECIFICATION Mains Input Voltage : 230 V A.C, 50Hz +/- 10V Secondary Voltage : 5V.DC Normal current consumption : � 50mA @ 230V And � 100mA @ 5V D.C Maximum current consumption : � 200mA @ 230V And � 500mA @ 5V Enclosure : CRCA Fabricated Wall mounting type Dimensions : 300(H) x340(L) x100(D) mm

Wè provide high efficiency off grid solar power panelsfor your house, industry. need based solutions are executed based on your requirements. n choice.   Additional Information : Minimum Order Quantity: 1 Kilowatt

Being a noteworthy manufacturers and suppliers, Vajra Controls in Bangalore are offering extensive assortment of Drive Panels. These are manufactured using superior quality components and innovative technology under the guidance of skilled professionals. We offer both AC and DC Drive panels. Moreover, our products are known for rendering hassle free performance. They are known for their effective use, premium quality, reliability, reasonable etc.

  AMF panel and generator packages are designed to provide emergency power during mains supply failure. During operation, the control panel of the AMF monitors the mains entering the building. If a mains failure occurs, the panel will disconnect the mains from the load, the generator is started and its output connected to the load. (The load being appliances, lights, etc in use within the house/office/factory at the time of mains failure). The generator continues to supply the building until the mains supply returns. The generator then automatically disconnects, stops and the mains is re-connected to the load. The AMF panel reverts to the standby mode ready to respond in case of another mains failure. Operation With the generator in 'Auto' mode, the incoming main is monitored continuously. If the mains voltage falls outside the preset limits, a 'mains failure' has occurred and the process of starting the generator set is initiated. Once the mains failure is recognised, the contacts are released to disconnect the load from the mains. The 'mains available' and 'mains on load' lamps extinguish. There is a pre-set and adjustable time delay before the generator is started. This avoids unnecessary starting of the generator when very short duration mains breaks occur e.g. 2 or 3 second breaks due to lightning strikes. After the delay, the engine fuel solenoid / ignition system is energised. A pre-heat period begins for generators fitted with indirect injection diesel engines. The choke is operated on petrol-engined sets. The starter motor relay energises and the engine is cranked for a pre-set period (typically 10 seconds). If the engine fires up and the speed increases through the 'crank-cut' threshold, then the starter motor is dis-engaged. Alternatively, if the engine does not start during the first crank period then the starter de-energises for an equal rest period before energising for another attempt. If the engine has not started after the last 'crank' period, then the engine fuel solenoid / ignition is de-energised and the generator is deemed to have failed to start and the appropriate annunciator is illuminated. Assuming that the generator has started during one of the attempts, the alternator output is checked to ensure that it is within specification. If so, then the generator contactor is energised and the load is supplied from the generator. In normal circumstances, the period from mains failure occurring to generator supply being connected is about 20 seconds. During generator operation, the engine oil pressure and temperatures are monitored and should an abnormality occur, the generator will immediately be shutdown and the appropriate annunciator illuminated. When the mains supply returns, the mains available lamp is illuminated within specified limits. The main is then monitored for a pre-set time to ensure that the supply is stable. The generator contactor is then de-energised and the mains contactor energised so that the mains supply is restored to the load. The 'alternator available' and 'alternator on-load' lamps extinguish and 'mains on load' lamp is illuminated. A short break in approximately 1 second occurs whilst the changeover is complete. The generator is 'run-on' for a cooling down period (adjustable up to 30 minutes) before the fuel solenoid / ignition system is de-energised and the engine stops. The operational cycle is then complete and the generator returns to a standby condition. During this time the starter battery is maintained in a charged condition by a 'trickle' charger supplied from the mains. 

I/O Capacity - Up to 48 IO, Extension Unit - 8 Input, 6 Output, Communication - Ethernet - Modbus RTU - Serial, Display - 3.5'' Monochrome  

We manufacture, supply and export the best quality Electrical Test Panels. Application: To measure electrical parameters of electronic and magnetic ballast/ chokes, luminaries etc. System Features / Technical Data: Consists of power meter WT210/ WT230 (Yokogawa), Auto transformer, cyclic timer, preset timer, event counter etc Power meter measures supply voltage-current power-frequency-power factor, V harmonics, I harmonics, TIM etc Also measures ballast voltage, open circuit voltage, cathode current, impedance, output frequency of electronic choke etc Testing can be done both in AC and DC voltages. Auto transformers for output fine tuning of supply voltage.

Our Fire Fighting Panels run on diesel or electric motors. We source the Panels from the reliable manufacturers who endow these systems with oodles of power. Our name resounds with quality assurance; hence, with each product that we offer, client’s satisfaction follows. So, when it comes to laying hands on premium Fire Fighting Panels, trust us! We are counted amongst the premier Exporters and Suppliers of Fire Fighting Panels in Bangalore, India.

Enobio® is a wearable and wireless electrophysiology sensor system for the recording of EEG,Signals you can trust,Quality EEG made easy,Advanced development tools,Integrated with an intuitive user application,Brain Computer Interface applications,Medical applications,Neurofeedback training

It is a flat, vertical where control or monitoring instruments are displayed or an enclosed unit that is the part of a system that users can access, as the control unit of a system.

Venkat Switchgears has a major presence in distribution stage of the power supply chain, with a wide range of products that includes Distribution & Power Transformers, Instrument Transformers – Current and Potential Transformers, HV Switchgears – Load Break Switch & Vacuum Circuit Breaker, LT & HT Panels, Compact Substations, Diesel Generator Sets and Cable Trays approved by ESCOMS, ISRO, CPCB II, BIS and other Electricity Companies.

Electronic Control Panel Boards, Electrical Control Panel Board

Ht Metering Cubicle, Ht Load Break Switch Panel, HT Transformer

Control Panel Boards, MS Control Panel

Servo Auger Filler, VFFS Machine, Three Axis Servo FFS Machin

Combustion Control System

Fire Alarm Control Panels, Nurse Call System, Public Address Syste

Electric Control Panel, Control Panel Enclosures, Extruded Rubbe

Panel Board, Electric Panel Boar

Panel Board, Air Break, Auxiliary Switches, Brake Switch, Electric Cabl

Single Phase Panel Board, Switch Gear Items, Electronic Component

Electric Control Panel, LT Control Pane

Vacuum Circuit Breaker Panel, Ht Switch Panel, Metering Pane

Automatic Control System, Access Control Syste

Mild Steel Control Panels, Control Panels, Stainless Stee