Ball Valves Dealers in Naroda, Ahmedabad

Atauff: type: ball valve KHP3 3way BODY: SquareMaterial:1,0737Ball seats: from Dn6 up to DN25O-Rings: NBR,FKM,EPDM,MVQOperating pressure:500 Bar depending on valve size and seal materials selectedTemp. range :10 C to + 100 C depending onseal material selected

The guidance of our skilled professionals so as to offer our clients high performance valves that offer tightness at low pressure as well as vacuum. The ball is arranged between the pre- compressed gaskets along with floating system, to achieve this functionality.

3 Way Multiport Ball Valve Manufacturers Mixing and Diverting type Three way L and T Port Full Bore Ball ValveEnd Connection - Flanged End, Pressure Rating - Class 150 / 300Valve Operation - Manual Hand Lever / Worm Gear / Pneumatic Rotary Quarter Turn Actuator 3 Way T Port Ball Valve Class 150 / 300 Series: F308T / F408T (Four Seat Supported, Square Body) Size - 1/2" (DN15) to 8" (DN200).3 Way L Port Ball Valve Class 150 / 300 Series: F508L / F608L (Two Seat Supported, Round Body) Size - 1/2" (DN15) to 12" (DN300) 3 Way (Three Way) Ball Valve Manufacturing Size Range:  DN25/25mm/1"/One Inch, DN32/32mm/1-1/4"/One and Quarter Inch, DN40/40mm/1-1/2"/One and Half Inch, DN50/50mm/2”/Two Inch, DN65/65mm/2-1/2”/Two and Half Inch, DN80/80mm/3”/Three Inch, DN100/100mm/4”/Four Inch, DN125/125mm/5”/Five Inch, DN150/150mm/6”/Six Inch, DN200/200mm/8”/Eight Inch, DN250/250mm/10”/Ten Inch and DN300/300mm/12”/Twelve Inch Size. Nivz Valves & Automation offers a tremendous value in Three Way Ball Valve. 3 Way Ball Valve is a Specialty of “Nivz”, a leading manufacturer, supplier and exporter of Ball Valve and Actuation. We have a wide Range/Model of Three Way Ball Valve in Carbon Steel, Stainless Steel, Cast Iron and others metal on special request. Our 3 Way Ball Valve selection covers Full Port, Flanged End with Manual Hand Lever, Gear Box, Pneumatic, Electrical Actuator Operation. Three way ball valves have an L or T Shaped Port Hole through the middle for suitable service condition. The different combinations of flow are shown in the figure. It is easy to see that a T valve can connect any pair of ports, or all three. Mixing and Diverting Type Three Way Ball Valves are also available. The L valve can connect the center port to either side port, or disconnect all three, but it cannot connect the side ports together. Nivz 3 Way Ball Valve features Four/Two seats for equal seat loading. Multiple Gland Packing V Seal & Spring Tension Washer gives zero leakage from gland portion. Our 3 Way Ball Valves are best suitable for all industrial applications. Nivz 3 Way Ball Valve application covers for Lube Oil Cooler 3 Way Ball Valve, Lube Oil Filter 3 Way Ball Valve, Duplex Heat Exchager 3 Way Ball Valve, Duplex Type Basket Strainer 3 Way Ball Valve, Duplex Filter 3 Way Ball Valve, Mixing and Diverting Type 3 Way Ball Valve, Multiport 3 Way  Ball Valve, Pump By-Pass Line 3 Way Ball Valve, Diverter 3 Way Ball Valve, Extened Stem 3 Way Ball Valve & Jacketed 3 Way Ball Valve can also available on special request. For screwed end type we provide BSP/BSPT/BSPP/NPT Female Thread as per customer choice. Socket weld end Nipple End Valve also can manufactuing on order basis. Multipor Valve available in Cast Carbon Steel (C.S - ASTM A216 GR. WCB), S.S. 304/316/304L/316L (ASTM A 351 GR. CF8/CF8M/CF3/CF3M), Low Temperature Carbon Steel - LTCS (ASTM A 352 GR. LCB/LCC), Alloy 20, Monel and Others of request. 3 Way Ball Valve application is for Mixing, Diverting & Blending. Our manufacturing range of 3 Way Ball Valve starts from size 1/2" to 12", Pressure Rating - 150# / 300# / PN10 / PN16 / PN25 / PN40 / PN64. Nivz all 3 Way  Ball Valves are supplieed with PTFE V Ring gland packing for long life zero leakages from gland area. For High Pressure application and Oil-Gas application we also do provide Fire Safe type design for better performance of valve. Nivz multiway ball valves are satisfactory perfrom in various Power Plant in Lube Oil Cooler and Filter Application. This application covers both valves operate by single Hand lever or Gear mechanism, Lube Oil cooler can be vertical or horizontal position and center distance between both valve up to 5 meter. Our lube oil 3 port valve performs at present in three Captive Power Plant at Cement Industries (major install by Thermax Ltd. / HTC China), one in KSK Power Energy and one more in Godavari Green Energy Ltd. Satisfactory performance report give by customer. Nivz Valves & Automation Three Way Ball Valve Manufacturer, 3 Way Ball Valve Exporter, Supplier, Stockist, Importer. L Port / T Port / Diverter Type / Multiway / Multiport / Lube Oil Filter / Lube Oil Cooler Changeover Ball Valve with Pneumatic Rotary Actuator, Motorized and Electrical Actuator Operated.

We are offering v notch ball valve, v notch ball valve , segment ball valve is quarter turn valve ,primarily intended as a control valve, but it can also used for shut off service .v notch ball valves is in v-notch design with strong cutting force and self-cleaning ,especially suitable for control of medium containing fiber and tiny solids ,therefore ,it is widely used in the auto-control systems in industries such as pulp and paper, chemical industry , petroleum , chemical fiber ,power ,metallurgy, pharmacy, environmental protection.

GAJANAND Ball Valves are the best choice for isolating Agricultural Irrigation lines.GAJANAND Ball Valves are made up of a thermoplastic material exhibiting excellent cold flow, bi-axial strength, and yield elongation properties.It can be used in exposed applications because of its resistance to UV, weathering, and ozone. It is an anti-corrosive material, which protect it when used against Corrosive substances.Each Ball Valve is tested to a pressure of 1.4 times its nominal pressure i.e. 16 kg.GAJANAND Ball valves are highly durable, requiring zero maintenance, easy to install, and most cost effective way of controlling the smooth flow of fluids in your irrigation needs.

AUDCO VALVES, Industrial Gauges, Motor Pumps, Pipe Fitting

We are acknowledged as the customer oriented organization, we always strive to provide the products which are needed by our clients to meet with rising demands of industries. We are offering range of Solid Ball Valve White with long MS plate handle, which is quite easy to utilize and operate due to attached long MS plate handle .The existing valve, is having ultra violet resistive body made up using Poly Propylene material.

Ours is a most trusted organization engaged in offering supreme grade Ball Cock. We offer these products in different sizes ranging from 15 mm to 25 mm. These products are used for preventing the over flow of water from the tank. Moreover, our quality inspectors check these products rigorously against pre set industry norms and ensure that only quality products reach customers. Features: Durable Easy-to-fit Light weight

The company deals in the superior quality of threaded ball valves in the marketplace. Our thread ball valves are remarkable for well defined threads. These well defined threads offer high level of gripping with the component with which they are being attached. Apart from this, the company is reckoned to be one of the most trustworthy threaded ball valves suppliers in national as well as international market.

Our customer-centric approach while making online or offline procedures makes us a reliable name. We keep a close eye on the transactions made to keep all the information shared by the clients safe and confidential. Ours is the known organization deeply ingrained in the Ahmedabad(India) and make sure to reach any destination with ease. Approx Price : Rs 25 / Unit Minimum Order Quantity : 200 Unit Brand No Specfic

We manufacture High performance Ball Valve as per international design and standard to get 100% Client Satisfaction and repeat order with total interchangeability, superior quality, workmanship & service. These Ball Valves come in Single Piece (12 to 4) Two Piece (1 to 8) as well as in Three Piece Design (12 to 12) to suit various critical, non-critical applications and pressure rating up to 1500 class in both full bore & regular (reduce) bore design.