Density Testing Equipment Dealers

Digital Automatic Tap Density Test Apparatus, Model: VTAP/MATIC-II is designed to hold two cylinders, capacity: 100 ml & 250 ml. The mechanism provides simultaneously rotating and tapping motion to the cylinders for packing the sample under test, evenly and uniformly. The equipment meets the requirements of USP Standards suitable for Method-I & Method-II. The user-friendly microprocessor based circuitry enables to select two different modes of testing tap density. In USP-I or USP-II mode, the numbers of taps are fixed and they can be set accordingly. The other is user mode in which, the user can select the number of taps as per requirement. The apparatus will run on the selected mode and at the end of the test, it will calculate and display the percentage difference between tapped volume and tapped density, compressibility index and Housner ratio automatically. Provision is made in the apparatus to accept an 80-column centronic parallel port printer for printing the results. Thus, a hard copy of test report can be obtained for each test. The menu appearing on the 4 line LCD screen gives almost all instructions on the screen, eliminating the need to refer the instruction manual while working.Instruments with only USP Method-l or Method-II specifications and non-digital junior models are also available.

Field Desity Test Apparatus Core Cutter method (Core Cutter Dolly with Hammer) consisting of a core cutter 100m internal diam , dolly for use with above and metal rammer for driving core cutter.

It Determines Bulk Density or unit weight of aggregates. It consists of a Calibrated Cylindrical Measures of sheet iron with handles. Capacities available 3 litres, 5 litres, 7 litres, 15 litres & 30 litres. Complete with One Tamping Rod 16mm dia x 600mm long both ends rounded.

Ideal for installation in pipe lines for continuous measurement of density of liquids. Available in different materials of construction and in screwed or flanged type connection. Measuring Range : a) 0-1 gcm3 b) 0-2 gcm3 c) 0-3 gcm3

It shall be of seamless steel tube, 130 mm long and 100 mm internal diameter with a wall thickness of 3 mm, bevelled at one end,( as per section 2.1) Steel Dolley It shall be 25 mm high and 100 mm internal dia with a wall thickness of 7.5 mm with a lip to enable it to be fitted on top of the core cutter. Steel Rammer It shall have solid mild steel foot of 140 mm diameter and 75 mm height with a concentrically screwed 25 mm dia. Solid mild steel staff. The overall height of the rammer including the foot as well as the length of staff shall be approximately 900 mm.The foot and staff together shall weight approx, 9.0 Kg. Pallete Knife It shall have a blade of stainless steel approximately 200 mm long & 30 mm wide (Stainless steel spatula ). Scraper A steel strip about 300 mm long, 25 mm wid & 3 to 5 mm thick with one bevelled edge with suitable to level off ground.

Turnkey Fire Testing Lab Setup in India – ISO, EN, ASTM, BIS Compliant Solutions | KDM Global KDM Global is a trusted provider of turnkey fire testing laboratory setups in India, offering end-to-end solutions that comply with ISO, EN, ASTM, and BIS fire testing standards. We specialize in designing, manufacturing, and installing fully equipped fire testing labs for railways, construction materials, electrical products, automotive components, plastics, and textiles. Whether you are an OEM, third-party lab, government testing facility, or certification body, our team provides complete project execution—from planning and layout to equipment supply, installation, calibration, and training. Complete Fire Testing Lab Setup Includes: Cone Calorimeter (ISO 5660) Smoke Density Chamber (ISO 5659-2) FTIR Toxic Gas Analyzer (EN 45545-2 / ASTM E662) UL 94 Flammability Tester Glow Wire, Needle Flame, and Oxygen Index Testers Surface Spread of Flame Tester (ISO 9239) Flame Retardant Testing Apparatus (ISO 11925-2) BS 476 Parts 6, 7 Testing Machines Cable Testing Apparatus (IEC 60332) Vertical & Horizontal Burning Tests for Plastics Customized Enclosures, Fume Extraction & Safety Systems Data Acquisition, Software & Remote Monitoring Tools Designed for Indian & International Standards Our fire testing labs are built to comply with: EN 45545-2 – Railway applications – Fire protection of materials ISO 5659, ISO 5660, ISO 4589, ISO 11925, ISO 9239 ASTM E662, E1354, D3801, D1929 BIS/ISI Standards (IS 16426, IS 15061, etc.) UL 94, NF X70-100, IEC 60332, and more Applications Railway and metro component fire testing Cable and electrical insulation testing Plastic, rubber, foam, and textile flammability analysis Building material flame spread and smoke generation testing OEM and BIS-compliance quality control labs Key Services by KDM Global Lab layout planning and compliance consultancy Equipment design, customisation, and manufacturing Delivery, installation, and in-house training Calibration with traceable certificates Annual maintenance contract (AMC) and spares support Documentation for BIS/ISO/EN audits Why KDM Global? 100% Made in India lab solutions Compliant with ISO, EN, ASTM, and BIS norms Pan-India delivery and international export services End-to-end project execution from concept to commissioning In-house technical support, remote servicing, and operator training

NON DIGITAL Provided with Mechanical timer without glass cylinder - M.S.I.47DIGITAL supplied without glass cylinder - M.S.I.76Glass Cylinder 100ml Available per pcGlass Cylinder 50ml Available per pc

We are a trusted entity from this domain, devotedly committed to offer a vast assortment of high-quality silt density index kit. Our offered range is manufactured by our experienced professionals in complete compliance with the international quality standards. Further, high quality raw material and contemporary technologies are used in the production process of this kit. Our esteemed clients can purchase offered product from us at affordable prices. Features: integral ss needle valve for pressure control quick release coupling making multi-point sampling convenient 40 mm dia.0-4 kgsq.cm on line pressure gauge automatic release valve transparent body 500 ml.beaker for sampling best way to enhance the life of your membrane technical specifications: material - polycarbonate abs sealing - silicon o-ring filter specs - 47 mm dia.0.45 micron filtration area - 12.5 cm² capacity - 250 ml housing 500 ml beaker connection inlet - 14" female threaded needle valve 14" f for pressure gauge operating test pressure - 23 kgcm2 installations provide 14" bsp male threaded nozzle at the location where the sdi has to be measured. Screw the needle valve to the nozzle. Connect the kit at the quick release coupling. The installation is now complete. Disconnect the kit and keep in the box.