AIR Flow Cabinets Dealers in Ambala

• Material: Stainless Steel
• Application: In Laboratory
• Voltage: 110V, 220V
• Power Source: Electric
• Feature: Durable, Portable
• Air velocity: 0.45 m/s to 0.65 m/s

As a celebrated Manufacturer and Supplier of Horizontal Laminar Airflow Cabinet, we attempt to gain 100% customer satisfaction. Our wide range is manufactured using matchless raw material. We meet the highest parameters and norms of quality set by the industry. Designs are made by keeping several specifications in mind. The quality on offer, which is loaded with features such as exact design and effective performance, is available for economical prices.

• Material: Stainless Steel
• Application: In Laboratory
• Voltage: 220V
• Power Source: Electric
• Feature: Easy To Install, Portable
• Dimention of the Working Area: 2’x2’x2, 3’x2’x2’, 4’x2’x2’ INCH

The complete structure is made of stainless steel (Grade-304 20g) sheet all over Environmental air is drawn by a centri-balanced blower unit through pre filters and is thrown to work chamber through high efficiency HEPA filters retaining  99.97% particular and Biological contaminants. Table top is covered with stainless steel sheet . front door is collapsible type & side panels are  fixed and made of clear thick Plexi –glass or transparent polycarbonate. Complete with U.V. Tube, fluorescent Tube Light, Gas cock & manometer. Vertical Same Specification : But the air drawn vertically on the work stage , An exhaust system can be provided(optional) at the bottom of the unit to throw the air outside the work place. To work on 220/230 V AC 50 HZ.

• Application: In Laboratory
• Voltage: 220V
• Condition: New
• Power Source: Electric
• Feature: Easy To Install, Portable, Strong Construction
• Frequency: 50 Hz

We are offering horizontal laminar air flow cabinet. laminar flow principle involves double filtration of air through coarse pre-filter (up to 5 microns) and hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant unidirectional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side in laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non glaring laminated sheet or stainless steel sheet. Side panels are fixed and are made out of transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) stand is built in type or detachable. Blower unit has aue or equivalent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable uv tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been installed. Two way gas tap for gas line has also been provided.

We deal in manufacturing of Horizontal Laminar Airflow Cabinet that finds applications in various hospitals, electronic industry and others. We use high grade component and quality raw material that is tested on various quality parameters The equipment is fabricated out of reinforced pest and weather resistant board, which is clad in white mica laminated sheet. Environmental air is drawn by a balanced blower through pre filters and is thrown to work chamber through high efficiency HEPA filter retaining particulate and Biological contaminants larger than 0.3 microns. Table top is covered with stainless steel/ mica sheet.The side panels & front door is made of thick clear imported plexy glass sheet including U.V. Tube Fluorescent Tube Light, Gas Cock and manometer.

• Voltage: 220 V
• External Size: 1310*750*2000mm
• Internal Size: 1200*645*610mm
• Work Surface Height: 720mm
• Display: LCD
• Noise: Less than 60 dB
• Consumption: 400W
• Gross Weight: 170kg
• Frequency: 50Hz

Features : Motor: ¼ hp motor with centrifugal blower assembly Filtration: through Hepa and pre filter Fitted with ultra violet tube Fluorescent light illumination Manometer Gas cock assembly Thick acrylic front and side panels Outer body made of thick mild steel duly powder quoted Platform made of stainless steel

• Material: Metal
• Feature: Durability, Rust Proof, Good Quality
• Size: 200x40x80 cm
• Pattern: Plain
• Loading Cpacity: 10-20kg
• Thickness: 0-10mm

We specialize in manufacturing and supplying Laminar Air Flow Cabinet. Laminar Air Flow Cabinet provided by us is recognized in the market for its unmatched quality, effective performance and long term durability. Keeping the market standards in consideration, we have fixed competitive prices for the same and make them available in safe packaging. Specifications : Work-bench made of thick ply-board enclosed with stainless steel sheet Blowers, pre-filters and motor fixed in lower portion of the cabinet HEPA Filter offered vertically on back of the work bench horizontally Also Available In : LAFH-01 Working area size 60 x 60 x 60 cm LAFH-02 Working area size 90 x 60 x 60 cm LAFH-03 Working area size 120 x 60 x 60 cm LAFH-04 Working area size 180 x 60 x 60 cm Entire structure manufacturing using Stainless Steel Structure made of M.S supplied with S.S. Work Bench

We are the topmost manufacturer and supplier of Laminar Airflow Cabinet from Ambala, Haryana. Our Laminar Airflow Cabinet is most suitable for culture analysis and for bacteriological and biological purposes in hospitals. These cabinets are also used in plant tissue culture, food and beverage industries as well as labs. Further, the cabinet is user friendly and does not make much noise thereby offering a suitable atmosphere in hospitals, pharmaceutical industries, etc. We supply the cabinets in the most advanced packaging at reasonably low prices.   Laminar Air Flow : Labgear Laminar Air Flow Horizontal are considered to meet the requirement of US Federal Standard providing element free air to meet class 100 conditions principally used for various works that require maintenance of the purity and cleanness. It is best for culture analysis, Bacteriological and Biological purpose in Hospitals; plant Tissue Culture, Labs, and Food and Beverage industries. It provides and economical work atmosphere, suitable for hospital, drug stores, pharmaceuticals factories and sanitation.   Outstanding Features : Low cost. Low Noise. User Friendly. Controlled Environment  particulate free Product Protection. Silent Vibration. Sound level less than 65db. Suitable for class 100 conditions. Side panels and front door made of thick acrylic sheet. HEPA filter Efficiency is  99.97% down to 0.3 micron. Working Table made of Stainless Steel 304. Built in UV. Germicidal light. Static Pressure Manometer Cock for Gas and Air is provided in working Area. Working Area is Illuminated with Fluorescent light. SIT DOWN working position for the operator. Supplied with plug in to work on single phase 220/230 volts AC Supply.

• Material: Stainless Steel
• Application: In Laboratory
• Feature: Durable, Easy To Install
• Power Source: Electric
• Warranty: 1year

• Material: Stainless Steel,Stainless Steel
• Condition: Good
• Power Source: Electric
• Application: In Laboratory
• Feature: Durable
• Voltage: 110V
• Type: Vertical Laminar Airflow Cabinet,Vertical Laminar Airflow Cabinet,Vertical Laminar Airflow Cabinet
• Warranty: 1year
• Country of Origin: India,INDIA
• Warranty: 1YEAR
• Brand Name: Amesys India,Amesys india,AMESYS INDIA
• Metal Type: Vertical
• Size: 4 X 2 X 2 Feet
• After-Sales Service Provided: Vertical Laminar Air Flow Unit (VLAF)

We are the prominent Laminar Air Flow Cabinet Manufacturer, Exporter and Supplier in Amabala Cannt., Haryana. These Laminar Air Flow Cabinets are made out of best quality board & all exterior surfaces covered with laminated mica sheet. This Laminar Air Flow Cabinet is fitted with safety attachments of international standard. Also, our Laminar Air Flow Cabinet can be obtained at market leading prices.Attributes : Work table is made of mica top/stain finish S.S. Table top Complete with hepa filter & pre filters motor blower, static pressure manometer, cock for gas, air or vacuum line Front & side doors are made of plexiglas transparent thick sheet duly farmed. Built in U.V. tube work table is illuminated by fluorescent light Two legs table top and two table supports are detachable & can be taken out & fixed within minutes, front door can be kept full open/half open, fully closed as desired

• Material: Stainless Steel
• Application: In Laboratory
• Feature: Durable, Easy To Install
• Voltage: 110V
• Power Source: Electric
• Warranty: 1year

Horizontal Laminar Air Flow Cabinets : Alpha Chem is manufactures,exporter & suppliers Horizontal Laminar Air Flow Cabinets. Horizontal Laminar Air Flow Cabinets : This is"works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto"5"microns) and Hepa filters (down to"0.3"microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass. Prefilters:- DOP tested as per Standard BS:"2831"with efficiency"90%"down to"5microns. Made of Washable synthetic material. Hepa Filters:- Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per US Standard"209B."Efficiency"99.97%"down to0.3"microns. Blower Units:- Assembly of AU or equivalent motor workable on"220V"AC"50Hzsingle phase, dynamically balanced blowers making the unit least vibrant with minimum noise level. Features:- Lighting": Fluorescent tube lights Sterilization": Germicidal Ultra Violet (UV) tube Manometer": Static pressure thick Acrylic block type K-System:- The K-System encompasses the specialist requirement of ocyte, sperm and embryo handling during procedures in both animal and human reproduction. The K-system is often built into a Laminar Flow Cabinet. The utensils are warmed by the heating of part of the table plate of the cabinet. The transmitted light source and the regulation transformer for the stereo microscope are located under the stainless steel table plate, with a window for transmitted light built into the table plate.

Our company is engaged in the manufacturing of varied range of laminar air flow horizontal equipment, which is known for their best quality performance and the durability it contains. Our range of laminar air flow horizontal have the following features: It work-bench made of thick ply-board covered with stainless steel sheetHEPA Filter provided vertically on back of the work bench horizontallyBlowers, motor and pre-filters fitted in lower portion of the cabinet Apart from that, our range of products is available in the following specificationsLAFH-01 Working area size 60 x 60 x 60 cm.LAFH-02 Working area size 90 x 60 x 60 cm.LAFH-03 Working area size 120 x 60 x 60 cm.LAFH-04 Working area size 180 x 60 x 60 cm. ALTERNATIVE OPTIONSComplete Structure made of stainless steelStructure made of M.S. with S.S. work bench

• Type: Automatic
• Material: Stainless Steel
• Application: In Laboratory
• Voltage: 220V
• Power Source: Electric
• Feature: Durable, Easy To Install, Strong Construction
• Warranty: 1 Year

Laminar flow principle involves double filtration of air through coarse pre- filters (upto 5 microns) and Hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non-glaring laminated sheet or stainless steel sheet (optional). Side panels are fixed and are made out transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) Stand is built in type or detachable. Blower unit has AU or equivalent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been installed.Two way gas tap for gas line has also been provided.

We are offering laminar air flow cabinet with hepa filter, gas & vaccume cock, uv & florocent tube & ss top. size 2'x2'x2' & 4'x2'x2'.

Vertical Laminar Air Flow Cabinet Ask for Price Add To Cart VERTICAL LAMINAR AIR FLOW CABINET People who are looking for VERTICAL LAMINAR AIR FLOW CABINET)one of the Manufacturers, Suppliers& Exporters of laboratory equipments in which this is one of them for more information below mention is the details:- VERTICAL LAMINAR AIR FLOW CABINET(PSAW-157A) Details same as above BDI-170 with laminar flows down vertically form top to wards the work table. Supplied complete with static finish Mica table top. Transparent front door (5m.m). Static pressure manometer. Built in U.V. Germicidal light & fluorescent light and Cock for gas, air or vacuum line. Working Chamber Size A. 2�x2�x2� B. 3�x2�x2� C. 4�x2�x2� D. 6�x2�x2�

• Type: Laminar Air Flow Cabinets
• Material: Mild Steel, Stainless Steel
• Application: In Laboratory
• Voltage: 110V, 220V
• Condition: Good, New
• Power Source: Electric
• Feature: Durable, Easy To Install, Fine Finish, Portable, Rust Proof, Strong Construction
• Warranty: 1year, 2years

LAMINAR AIR FLOW CABINETS- HORIZONTAL : JCA-07A Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto “5” microns) and HEPA filters (down to”0.3″microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and HEPA filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass. Prefilters:-DOP tested as per Standard BS:”2831″with efficiency”90%”down to”5microns. Made of Washable synthetic material. HEPA Filters:-Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per USStandard”209B.”Efficiency”99.97%”down to 0.3″microns. Blower Units:-Assembly of AU or equivalent motor workable on”220V”AC”50Hzsingle phase, dynamicallybalanced blowers making the unit least vibrant with minimum noise level. Features:- Lighting”: Fluorescent tube lights Sterilization”: Germicidal Ultra Violet (UV) tube Manometer”: Static pressure thick Acrylic block type Available in following sizes :-Working Chamber: 2 x 2 x 2′Working Chamber: 3 x 2 x 2′Working Chamber: 4 x 2 x 2′Working Chamber: 6 x 2 x 2′Working Chamber: 8 x 2 x 2′

• Prefilters:  DOP tested as per Standard BS: 2831 with efficiency 90% down to 5microns. Made of Washable synthetic material.
• Hepa Filters: Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per US Standard 209B.Efficiency 99.97% down to0.3 microns.
• Blower Units: Assembly of AU or equivalent motor workable on 220V AC 50Hz single phase, dynamically balanced blowers making the unit least vibrant with minimum noise level.
• Lighting: Fluorescent tube lights
• Sterilization: Germicidal Ultra Violet (UV) tube
• Manometer: Static pressure thick Acrylic block type

We are offering vertical laminar air flow cabinet that has been manufactured using superior quality raw material. Due to its attractive features such as durability, high performance and accurate dimensions, it is widely accepted by our clients. Applications : microbiological operationsbio-assays and sterility testingmicrobiological labsproviding protection for open vessels of chemicals, solvents or powders ideal for : tissue culturemicrobiologybiotechnologypathology labspharmaceutical industryelectronic industry working area sizes : 90 x 60 x 60 cm90 x 60 x 60 cm120 x 60 x 60 cm180 x 60 x 60 cm

• Brand Name: JLab
• Model Number: JLab8788
• Place of Origin: India

Works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass.

• Application: Laboratory
• Power Source: Electric
• Material: Mild Steel
• Brand: Almicro
• Surface Finish: Polished
• Voltage (V): 220 V
• Phase: Three Phase
• Frequency (Hz): 50 HZ

Specifications are same as in VT.401.17.Ch but in vertical design.