Compression Testing Machine Dealers in Ambala

Compression Testing Machine 1000KN : Alpha Chem is manufactures,exporter & suppliers Compression Testing Machine 1000KN. Compression Testing Machine 1000KN : Capacity of the machine is 1000kN. Specimens upto 15cms cubes and 15 cms dia x 30 cms high cylinders can be accommodated. Load measurement is done by a 15 cms dial bourdon tube type hydraulic pressure gauge calibrated in 100 divisions, fitted with a maximum pointer (lag less pointer). The gauge is calibrated against an RTC tested proving ring. The machine is of channel construction, giving excellent lateral rigidity. The hydraulic loading unit is located on the base of the loading machine. The hydraulic jack is precision machined. The piston and cylinder are ground and lapped to fine tolerances. The lower platen can be centrally located on the base, and has concentric grooves for centering the specimen. Spacer is provided to test small specimens. The upper platen is mounted on a swivel arrangement for self aligning action. The pump is fitted integral on the testing machine along with oil reservoir. The hand operated pump is of two speed concentric piston type. Other Capacity : 10 Tons, 25 Tons, 50 Tons, 100 Tons, 150 Tons, 200 Tons Compression Testing Machine (Hand Operated) Four Pillar Type Available Capacity : 10 Tons, 25 Tons, 50 Tons, 100 Tons, 150 Tons, 200 Tons

compression testing machine "insif" hydraulic hand operated 50 tonnes capacity 100 tonnes capacity 150 tonnes capacity 200 tonnes capacity.

Compression Testing Machine 2000 KN (Electrically Operated) For Testing Lab     NAUGRALABS LABORATORY PRODUCT NAME: COMPRESSION TESTING MACHINE 2000 KN (ELECTRICALLY OPERATED) FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-038015 Description and Specification for Lab Tenders Compression Testing Machine (Electrically Operated) - Four Pillar type It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height.. Cement and Concrete Testing Lab equipment manufacturers,exporters and Cement and Concrete Testing Lab suppliers The machine meets the essential requirements of various Indian, British & American standards for compression tests. Loading Unit : The hydraulic jack of 2000 kN capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. Pumping Unit : The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability.The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated. Other Capacity : 10 Tons, 25 Tons, 50 Tons, 100 Tons, 150 Tons, 200 Tons, 300 Tons

Capacity : 40 ~ 100 KN Type : Triaxial System Application : Measuring soil strength, analyzing soil stability and providing data for construction projects. Perform UU, CU and CD Triaxial tests Specimen size : ��61.8 x 125, �¤ 101 x 220 mm Max. axial load : 70 ~ 100 KN Lift speed range (mm/min) : 0.003, 0.006, 0.008, 0.012, 0.020, 0.030, 0.040, 0.050, 0.060, 0.070, 0.080, 0.090, 00, 0.400, 0.500, 0.600, 0.700, 0.800, 0.900, 1.000 Max. Stroke : 45 ~ 55 mm Max. confining pressure : 2 â�� 3 Mpa Max. back pressure : 0.6 â�� 1.5 MPa Pore Water pressure : 0 â�� 2 MPa Volume change range : 0 â�� 50 ml Minimum division : 0.1 ml Axial displacement range : 0 â�� 30 mm

Our ECT Machines delivers pulsed, bi-directional square wave stimulus. The current is constant at 0. 9 ampere and the voltage varies automatically by a built in microcomputer as per the impedance of the patient. We conceived and designed the rajas keeping three major considerations in mind i. E. Its stimulus parameters had to be chosen on the basis of research data. (Maxwell 1968, weaver teal 1977 wiener 1980). It should have the capacity to produce seizure virtually 100%. It should be safe and easy to operate. Parameters display on LCD. Auto stimulus voltage. Auto impedance check. Output display in joules as well as in milli coulombs. In built rechargeable battery with charger.

Civil Lab Equipment, Volumetric Pipette, Sherrington Rotating Dru

Educational Equipment, Survey Lab Equipment, Civil Engineering Lab Equipment

Hand Sanitizer Dispenser, Nebulizer Machine, Conical Flask, Dental Autoclav