Industrial Pump Dealers in Dholkot, Ambala

The submersible water pump set that we manufacture has a wet type water cooled rewind able motor. This water pump set has a bearing set designed to withstand high axial thrust load. Furthermore, the motor of this water pump set is fabricated to cove a wider voltage range. The water pump set is checked with the help of computerized testing procedure. appreciated for : lightweightnoiseless operationsophisticated designlow power consumptionhigh durability extensively demanded for : sprinkler irrigationfire fightingirrigation purposesdrinking water supplyindustrial water supply

  Self Primimng Pumps are normally manufactured as per IS: 8472. These Self Priming Domestic Pumps are light in weight with rugged construction design and balanced parts which give noiseless operation for a longer duration. These pumps are available from 0.25 HP to 1.50 HP. Pumps are used for wide range of applications like – Domestic Water Supply, Gardening and washing purposes, etc.     The motor body is made from extruded aluminum and cast iron for better heat dissipation. Capacitor starts and runs motor with IP 44 protection. Pre-lubricated double-shielded ball bearings for a longer life. High quality carbon-ceramic mechanical seal for a longer life. The rotating parts of motor and pump are dynamically balanced to ensure minimum noise and vibration. Protective Enclosure – Totally Enclosed Fan Cooled motor (TEFC) type means no dust or moisture. Pump can operate in wide voltage range.     Centrifugal Monoblock Pumps Centrifugal Monoblock Pumps are manufactured as per IS: 9079. These pumps and impellers are specially designed to get the best hydraulic efficiency. At the same time, the totally enclosed fan-cooled system is suitable for conditions where there is a wide voltage fluctuation. These are used in wide range of Applications like Domestic and Agricultural Water, Community water supply, Commercial establishments etc.     High operating efficiency resulting in lower power consumption. Dynamically balanced rotor for longer trouble-free life of the pump. Dynamically balanced impeller for vibration-free operation and long life of the bearings. Rotating parts are dynamically balanced to ensure minimum noise and vibration. "A" Class insulation and low temperature for trouble-free operation in wide voltage bends. Grease-lubricated anti-friction ball bearings of “SKF” brand are fitted at both ends to withstand radial and axial loads. Single shaft for motor and pump ensures good mechanical strength and higher efficiency.

We are instrumental in the supplying of high-performance Self Priming Monoblock Pump sourced from the trusted manufacturers or vendors. Before procurement, we stringently check our Self Priming Monoblock Pump against various quality parameters. Our Self Priming Monoblock Pump is accredited for attributes like high strength, flawless performance, superb finish and corrosion resistance. Buyers can contact us for bulk as well as urgent orders.   Specification : RPM - 2880 Power Range - 0.5 Hp. & 1.0 Hp. Version - 200-240v, 50 Hz. A.c.-1 Ph. Permanent Split Capacitor (psc) Incorporated with Thermal Overload Protector. Degree of Protection - Ip 54 Class of Insulation - B Delivery Head upto - 42 Mtr. Self Priming Capacity - 15 Ft.  Suction Lift upto - 25 Ft. Normal Suction X Delivery Size in Inches - 1x1

A Simple hand operated syringe type, dual purpose air pump which can be used either to exhaust or compress. The metal cylinder is of size 185 x 32 mm.  length x diameter. Two oiled valves are provided, outlet valve mounted axially and the end of cylinder and inlet valve radially at the side. With an adapter for the connection of  rubber pressure tubing which can be screwed on to either the inlet or the outlet valve depending on whether the pump is used to exhaust or compress. With  wooden handle at the rear end and two riffled nozzle of  9 mm. diameter. Overall length of the pump when fully closed is 325 mm. and width including the side mounted valve assembly is 110 mm.

The setup is designed to study the Hydraulic Ram. Hydraulic Ram is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “when flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. Set up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure gauge is connected for the purpose of measurement. Closed loop water circulation Compact & stand alone set up Stainless Steel tanks and wetted parts Superb Painted structure Simple to operate & maintain

Oil sealed, air cooled, V-belt driven and mounted on Base Plate with belt guard etc. With motor 220 volts AC Single Phase.Displacement Motor Rate LitersMin. 32 0.25 50 0.25 75 0.50

Offers air pump, fixed to polished seasoned teakwood base with stopcock. Pump plate made of brass metal.

Submersible Moto

Submersibles Pumps, Sewage Pumps, Electric Motor

Submersible Pump Sets, Hand Pumps, Steel Tube

Submersible Pump, Drip Irrigation System, PVC Pipe, Submersible Cabl

Solvent Pump, Mechanical Engineering Consulting Service

Oil Filled Submersible Pumpset, Air Break Starte

Vertical Process Pum

Submersible Pump, Motor Pump, Pipes, Sanitary Ware, Wash Basi