Laboratory Tables Dealers in Ambala

We are a prominent Manufacturer, Exporter and Supplier of Force Table. Force Table is used for verifying laws of composition and resolution of forces, comprising a machined aluminum table 40 cm diam., scale graduated 360o, on heavy vertical support rod and tripod base. Complete with one ring, 4 sliding clamp pulleys. The Force Table offered by us is supplied with four cords with rings at one end, without masses. Why our Force Table? Heavy Vertical Support rod & tripod baseComes with 1 ringFour Sliding Clamp PulleysComes with Four Cords with rings at one end

Force Table Comprised of an accurately machined aluminum table 40cm in diameter graduated in 360° on its rim in 1° intervals. Mounted on a heavy vertical support pillar and tripod base fitted with leveling screws. Provided with four weight hangers of 50g each and four sets of brass slotted weights (each set consists of the masses: 1 x 1g, 2 x 2g, 1 x 5g, 2 x 10g, 1 x 20g, 1 x 50g, 2 x 100g, 1 x 200g).

These Force Tables are reckoned for their functional and dimensional accuracy. Also, they are backed with 4-50 gram weight hangers. The range we present is quality assured by the professionals and from the initial stages of procurement of raw material, we make stern quality inspections to deliver the best range. Our entire range is made to go through a string of quality regulatory processes to make sure they are according to industry standards.

Our Force Table is designed for maximum stability and accurate measurement. Used for experimentally verifying the laws of composition and resolution of forces utilizing vector diagrams of several concurrent forces. Table is constructed of machined aluminum of size 40 cm diameter and graduated in degrees around its full circumference. Unit is mounted on a heavy support rod with tripod base equipped with leveling screws. Consists of : Four pulleysFour mass hangersFour sets of slotted masses (10, 20, 50, 100 g in each set)

For heating slides to a uniform temperature just below the melting point of wax to provide maximum flattening without damaging the section. Top plate is mounted on an insulated metal frame. It is fitted with imported thermostat to control surface temperature from ambient to 70°C. A depression has been provided on the top surface to house a thermometer to indicate the surface temperature. Supplied complete with pilot light, cord and plug, but without thermometer. Suitable to work on 220 V, single phase, 50 Hz, AC supply.   Top Plate Sizes in mm:(Length x Width)300 x 250400 x 250450 x 300600 x 450

Offered in the market at nominal rates, our range of Force Table is loved by our clients, and for the finest quality, we process these in compliance with the industry norms. While we offer the finest quality of products to our clients, the USP of our range of tables is that these are corrosion resistant, have high tensile strength, and guarantee longevity. While we package this product using premium materials and ensure timely delivery of the product, we source these from reliable vendors in the market. We are located in Ambala, Haryana, India.   Details : For verifying the laws of composition and resolution of forces, comprising a machined aluminium table 40cm dia. Its raised rim has engine divided scale graduated 360o, on heavy vertical support rod and tripod base. Complete with 1 ring, 4 sliding clamp pulleys, 4 weight hangers and 12 weights (2x10g, 2x20g, 4x50g, 4x100g).   Model Number : GP-814.1

For verifying laws of composition and resolution of forces, comprising a machined aluminium table 40 cm diam., scale graduated 360°, on heavy vertical support rod and tripod base. Complete with one ring, 4 sliding clamp pulleys. Supplied with four cords with rings at one end, without masses.

We are reputed as one of the reliable Laboratory Force Table Manufacturers and Suppliers in India. The Force Table consists of 4 pulleys, 4 weight hangers and 4 sets of slotted weights that assist in the force and vector demonstrations. The table is also made up of machined aluminum having the diameter of 40 cm. Moreover, the Force Conversion Table offered by us complty with the international quality standards.

FORCE TABLE Dual scale allows to take readings clock or anticlockwise. Free movement of Pulley reduces friction. Precise measurement of angle with the built-in-scale. By changing mass or angle a little equilibrium position changes immediately.

For verifying laws of composition and resolution of forces, comprising a machined aluminium table 40 cm diam., scale graduated 360°, on heavy vertical support rod and tripod base. Complete with one ring, 4 sliding clamp pulleys. Supplied with four cords with rings at one end, without masses.

The Universal Force Table also known as the student force table is used to demonstrate laws of mechanics regarding forces and resolution of forces. Technical SpecificationsDual scale that allows students to take readings either clockwise or counterclockwiseThree complete weights sets with (2x) 5g, 10g, 20g, 50g brass slotted weights and a 50 g hangerThree pulleys with clamps and two sets of strings that allow students to investigate the equilibrium of either three or four forcesA lightweight durable table top and a sturdy cast iron support that allows both ease of use and accuracyDimensions : approx. 300mm x 390 mmAll accessories, manuals and experiment literature shall be includes

To verify the laws of triangle, parallelogram and polygon of forces. Compressed with 12mm thick wooden board 30cm dia. disc accurately turned and graduated in degrees. It is provided with 4 frictionless adjustable pulleys having pivots of hardened steel, cords from central ring carries hangers for slotted weights. Pulley clamps have an index to show direction of forces. The base is of heavy cast iron with leveling screws and vertical rod is nicely polished supplied complete with 4 mass hangers and 12 masses (2 x 10 g, 2 x 20 g, 4 x 50 g, 4 x 100 gm).

Slide Warming Table   For heating slides to a uniform temperature just below the melting point of wax to provide maximum flattening without damaging the section. Top plate is mounted on an insulated metal frame. It is fitted with Imported thermostat to control surface temperature from ambient to 70?C. A depression has been provided on the top surface to house a thermometer to indicate the surface temperature. Supplied complete with pilot light, cord and plug, but without thermometer. Suitable to work on 220 V, single phase, 50 Hz, AC supply.   Top Plate Size      Length : 600 mmWidth : 150 mm

We are acclaimed as a reputed Manufacturer and Supplier of Slide Warming Table from Haryana, India. We make available these tables in different styles and sizes as per the requirements of our clients. They are made up of high quality material and have long service life. Our Slide Warming Tables have thermostatically controlled uniform temperature and their top is made up of anodized aluminium or stainless steel. Contact us for the most reasonable prices!