Pump Controllers Dealers in Bangalore

Liquid Level Controller (APC-1) is used to automatically start & stop the pump for filling the tank or emptying the tank with alarm indication With liquid level inputs from the Magnetic Float Switch fitted in the sump and over head tank, (APC-1) controller can be used for PUMP UP or PUMP DOWN operation. Alarm relay is provided to indicate abnormality in the process like liquid level raised beyond high level setting or drops below low level setting in the Overhead or sump tanks. Technical Specification :Supply Voltage : 95 - 280V AC, 50 Hz.Power Consumption : 3VA.Inputs : High High Level : Magnetic Float Switch Input (Close on Rising Level). High Level : Magnetic Float Switch Input (Close on Rising Level). Low Level : Magnetic Float Switch Input (Close on Falling Level). Low Low Level : Magnetic Float Switch Input (Close on Falling Level). PU/PD Mode Selection : Pump_UP/Pump-Down Mode is selected by Slide Swtich Provided on rear end.Outputs : Pump Relay No Contact : Potentail free 1No Rated 10Amps @ 250V AC. Pump-UP-Mode : Closes when the liquid level falls below low Low level reaches at or above high level Pump-Down- Mode : Closes when the liquid level reaches at or above High level and Opens when the liquid level falls below Low level Alarm Relay NO Contact : Potentail free 1No Rated 10Amps@250V AC. Closing When the Liquid level goes above High High level or Liquid level falls below Low Low Level and Opens when the liquid level Normal conditionor by Alam ACK button provided on front panel

This Automatic Water Level Controller System is specially designed for Dual motor operation.   This model is a Dual control type Water level controller system which can control Sump motor as well as Bore well motor with automatic changeover technology.This system is suitable where both the motors are used to pump water to Common overhead tank (Single Tank). Thereare two mode of operation. Sump mode and Bore well mode. When there is a Water in the sump the system works on sump Mode, when the Water in the sump tank gets Below foot Valve Level it Automatically switch over to the Bore well Mode. If the water gets filled in the sump tank the system Resumes back to Sump Mode. This system is suitable for Residences, Commercial complexes, Residential Apartments, hotels, hospitals, Industries, hostels, …Etc..   This system is suitable where both sump motor & Bore well motor are used to pump water to a common overhead tank. The system every time checks for available of water in the Sump and controls sump motor as first choice. If and when sump becomes dry, the system will automatically changeover to Bore well motor. The system can be upgraded into "Multi-tank control system" to maintain water level in several overhead tanks.   Visual Indications : Four stage water level indicator for over head tank, water flow indication(Running Line), voltage level indication, power on indication and auto/manual indication. Features: Switch on the panel if water tank is in required mode and switch off the panel at tank full. This is a product mainly focusedto help people with submersible pumps who previously had little control over the functionality of the pump and had to start manually and stop the pump with all those uneasy methods. which make the operation of these pump difficult for novice users, keeping in mind the ease of use we developed this system which makes the operation of these pumps a child's play.It is an unique device for single phase submersible pumps. ​ Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. How It Works : Automatically starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tankfull or the sump water level drops below foot valve level.Dry RunDue to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication. For more details please watchvideo demo.Voltage Cut-offAutomatic Water Level Controller ULDX-DR-1ph automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V.   Surge protection Built in surge protection is the Main featurese of ultradeluxe series.Soft Switch auto / Manual Automatic Water Level Controller ULDX-DR-1ph comes with this feature of selecting manual/auto mode as per the requirement by just pressing the respective soft switch. Manual mode is used to Draw the water directly from the pump for activities like carwash, front area wash, tank cleaning, watering the plants Etc….NeedThe Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank.   Rocker Bypass Switch. The optional rocker switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed.   Power ON/OFF Switch. Has rocker switch to select Power On/Off operation . The Special Feature Automatic Water Level Controller ULDX-DR-1ph shifts from Manual Mode to Auto Mode automatically if the over head tank gets filled. The system changes the mode automatically.   Application: The product is suitable for almost all site conditions water tank for maintaining level automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination stater. ​ Sutable for Dual Pump Operation Mono Block Pump and Borewell Pump(Submersible Pump) In Ultra deluxe series varients are avilable for any type of pump, bore well and any combination of tanks.

• Type: Ac Solar Pump
• Application: Farm Irrigation, Submersible
• Voltage: 440V
• Fuel: Solar Water Pump
• Application: Agriculture, Deep Well Pumping, Industry, Water
• Automatic Grade: Automatic
• Power: Solar

saurally provides highly efficient solar water pumps that areautonomous and does not require any batteries. Vfd used by oursystems is of highest quality that is governed by advancedalgorithm to achieve maximum solar power conversion.saurally also facilitates conversion of normal water pump intosolar water pump. This reduces the investment on a new pump forthe farmer. features: vfd with advanced german technology superior performance & high capacity high efficiency mppt based pure sine-wave inverter completely manufactured in india extensively tested products with quality certifications

This Automatic Water Level Controller System is specially designed for Dual motor operation. This model is a Dual control type Water level controller system which can control Sump motor as well as Bore well motor with automatic changeover technology.This system is suitable where both the motors are used to pump water to Common overhead tank (Single Tank).There are two mode of operation. Sump mode and Bore well mode. When there is a Water in the sump the system works on sump Mode, when the Water in the sump tank gets Below foot Valve Level it Automatically switch over to the Bore well Mode. If the water gets filled in the sump tank the system Resumes back to Sump Mode. This system is suitable for Residences, Commercial complexes, Residential Apartments, hotels, hospitals, Industries, hostels, …Etc.. This system is suitable where both sump motor & Bore well motor are used to pump water to a common overhead tank. The system every time checks for available of water in the Sump and controls sump motor as first choice. If and when sump becomes dry, the system will automatically changeover to Bore well motor. The system can be upgraded into “Multi-tank control system” to maintain water level in several overhead tanks. Visual Indications : Four stage water level indicator for over head tank, water flow indication(Running Line), voltage level indication, power on indication and auto/manual indication. Features: Switch on the panel if water tank is in required mode and switch off the panel at tank full.This is a product mainly focused to help people with submersible pumps who previously had little control over the functionality of the pump and had to start manually and stop the pump with all those uneasy methods. which make the operation of these pump difficult for novice users, keeping in mind the ease of use we developed this system which makes the operation of these pumps a child’s play.It is an unique device for single phase submersible pumps. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. How It Works : Automatically starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tank full or the sump water level drops below foot valve level.Dry RunDue to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication. For more details please watch video demo.Voltage Cut-offAutomatic Water Level Controller ULDX-DR-1ph automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V. Surge protection Built in surge protection is the Main featurese of ultradeluxe series.Soft Switch auto / ManualAutomatic Water Level Controller ULDX-DR-1ph comes with this feature of selecting manual/auto mode as per the requirement by just pressing the respective soft switch. Manual mode is used to Draw the water directly from the pump for activities like car wash, front area wash, tank cleaning, watering the plants Etc….NeedThe Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank. Rocker Bypass Switch. The optional rocker switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed. Power ON/OFF Switch. Has rocker switch to select Power On/Off operation. The Special Feature Automatic Water Level Controller ULDX-DR-1ph shifts from Manual Mode to Auto Mode automatically if the over head tank gets filled. The system changes the mode automatically. Application: The product is suitable for almost all site conditions water tank for maintaining level automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination stater. Sutable for Dual Pump Operation Mono Block Pump and Borewell Pump(Submersible Pump) In Ultra deluxe series varients are avilable for any type of pump, bore well and any combination of tanks.

Energywin's solar water pump controller is an efficient, low-maintenance and economical option for livestock, agricultural, recreational and residential applications. With rising prices of diesel and the vagaries in agriculture power supply situation many farmers have been considering solar energy as an alternative. Interestingly customers are seeing solar pumps as both pumping and an energy solution. The solar pump controller is well suited to cover the needs of smallholder farmers as it is an affordable irrigation technology for individual use that combines environment-friendliness and low maintenance costs with income, productivity and labor-saving benefits.   FEATURES Dual Input source selection (Grid and Solar). Integrated MPPT technology with 99% accuracy. Protection against input lighting surge, over load, dry run, etc. Compatible with wide range of pumps ranging 1HP to 15HP. Suitable for both submersible and surface pumps. Indicators for RYB and solar availability. Manual by pass switch to grid. Low maintenance cost and easy to install. With IP54 enclosure. OPTIONAL: Online monitoring system with GSM-GPRS modem. Monitoring parameters include water discharge in litres, PV voltage and string current, mains voltage and current.  

Optional Accessories –Auto Control Panel that integrates with fire detection panels and starts engine set based on signals from Pressure Switches

Features   Enclosure – IP54 category Wide MPPT Range Automatic Start & Stop based on solar Irradiation Max I/P Voltage Model: 800V Ground water extraction for Irrigation, Commercial and Household use Particulate filter for air intake and exhaust 3 hp, 5hp, 7hp & 10hp Dry run protection IEC 61683/IS 61683 & IEC 60068-2(1,2,14,30) 5 Years Warranty Suitable for both Open Well and Tube Well MC4 connector for Solar input

Automatic Water Level Controller For Single Phase Submersible Pumps Panel Driver (Single phase to three phase). This is a unique device for submersible Pump Up to 2.5 HP Capacity. Our submersible panel drive is the most suitable device for start/Run capacitors Panel Driven Water Pumps. It increases the life of motor to work for year. Application Like Residential Buildings, apartment’s, Commercial Complexes, Industrial Buildings, Hotels, Hospitals, . . . .Etc. Visual Indications : Four stage water level indicator for over head tank, water flow indication(Running Line), voltage level indication, power on indication and auto/manual indication. Features: Switch on the panel if water tank is in required mode and switch off the panel at tank full. This is a product mainly focused to help people with submersible pumps who previously had little control over the functionality of the pump and had to start manually and stop the pump with all those uneasy methods. which make the operation of these pump difficult for novice users, keeping in mind the ease of use we developed this system which makes the operation of these pumps a child's play. It is an unique device for single phase submersible pumps. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. How It Works : Automatically starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tank full or the sump water level drops below foot valve level. Dry Run Due to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication. For more details please watch video demo. Voltage Cut-off Automatic Water Level Controller ULDX-DR-1ph automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V. Surge protection Built in surge protection is the Main featurese of ultradeluxe series. Soft Switch auto / Manual Automatic Water Level Controller ULDX-DR-1ph comes with this feature of selecting manual/auto mode as per the requirement by just pressing the respective soft switch. Manual mode is used to Draw the water directly from the pump for activities like car wash, front area wash, tank cleaning, watering the plants Etc…. Need The Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank. Rocker Bypass Switch. The optional rocker switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed. Power ON/OFF Switch. Has rocker switch to select Power On/Off operation. The Special Feature Automatic Water Level Controller ULDX-DR-1ph shifts from Manual Mode to Auto Mode automatically if the over head tank gets filled. The system changes the mode automatically. Application: The product is suitable for almost all site conditions water tank for maintaining level automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination stater. Sutable for Bore well submersible pumps. Jet Pumps, In Ultra deluxe series varients are avilable for any type of pump, bore well and any combination of tanks.

• Type: Pump Controllers
• Shape: Rectangular, Square
• Application: Solar Pump Controlling
• Voltage: 110V, 220V
• Condition: New, Used
• Power: 1000W, 600W, 750W
• Feature: Durable, Flameproof, Light Weight, Moisture Proof, Stable Performance
• Warranty: 1year, 2years3years

Wilo ST 15/6 ECO or 15/7 ECO,   Wilo Stratos TEC ST 15/1-6 (HE pump)   Safety valve: 6 bar   Pressure gauge: 0 ... 10 bar   Flowmeter: 1 ... 13 l/min   Non-return valves: Opening pressure 20 mbar,    openable Connection to diaphragm-type expansion vessel:  ¾'' ET, fl at sealing  Outlet safety valve: ¾'' IT  Connections to the solar pipes: ¾'' IT  Maximum temperature: 95 °C  Maximum pressure: 6 bar  Medium: Water with max. 50 % glycol

• Country of Origin: Made in India
• Material: ABS
• Usage/Application: Fire Fighting
• Brand: Surya Insts

Solar Pump Inverter, pcc panel boards, VFD commissioning, Manpower Services

This Automatic Water Level Controller System is specially designed for Dual motor operation. This model is a Dual control type Water level controller system which can control Sump motor as well as Bore well motor with automatic changeover technology.This system is suitable where both the motors are used to pump water to Common overhead tank (Single Tank). There are two mode of operation. Sump mode and Bore well mode. When there is a Water in the sump the system works on sump Mode, when the Water in the sump tank gets Below foot Valve Level it Automatically switch over to the Bore well Mode. If the water gets filled in the sump tank the system Resumes back to Sump Mode. This system is suitable for Residences, Commercial complexes, Residential Apartments, hotels, hospitals, Industries, hostels, …Etc.. This system is suitable where both sump motor & Bore well motor are used to pump water to a common overhead tank. The system every time checks for available of water in the Sump and controls sump motor as first choice. If and when sump becomes dry, the system will automatically changeover to Bore well motor. The system can be upgraded into "Multi-tank control system" to maintain water level in several overhead tanks. Visual Indications : Four stage water level indicator for over head tank, water flow indication(Running Line), voltage level indication, power on indication and auto/manual indication. Features: Switch on the panel if water tank is in required mode and switch off the panel at tank full.This is a product mainly focused to help people with submersible pumps who previously had little control over the functionality of the pump and had to start manually and stop the pump with all those uneasy methods. which make the operation of these pump difficult for novice users, keeping in mind the ease of use we developed this system which makes the operation of these pumps a child's play.It is an unique device for single phase submersible pumps. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. How It Works : Automatically starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tank full or the sump water level drops below foot valve level.Dry RunDue to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication. For more details please watch video demo. Voltage Cut-offAutomatic Water Level Controller ULDX-DR-1ph automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V. Surge protection Built in surge protection is the Main featurese of ultradeluxe series.Soft Switch auto / ManualAutomatic Water Level Controller ULDX-DR-1ph comes with this feature of selecting manual/auto mode as per the requirement by just pressing the respective soft switch. Manual mode is used to Draw the water directly from the pump for activities like car wash, front area wash, tank cleaning, watering the plants Etc…. NeedThe Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank. Rocker Bypass Switch. The optional rocker switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed. Power ON/OFF Switch. Has rocker switch to select Power On/Off operation. The Special Feature Automatic Water Level Controller ULDX-DR-1ph shifts from Manual Mode to Auto Mode automatically if the over head tank gets filled. The system changes the mode automatically. Application: The product is suitable for almost all site conditions water tank for maintaining level automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination stater. Sutable for Dual Pump Operation Mono Block Pump and Borewell Pump(Submersible Pump) In Ultra deluxe series varients are avilable for any type of pump, bore well and any combination of tanks.

Solar Pump Controller, PMP Plus Series Online UPS, Off Grid Inverter

Solar Pump Controller, Programmable DC Power Supplies

AMSAT EDC Booster Pump Controller, mood lighting, WiFi Weighing Scale

software house pump controller, Pic Programmer

Submersible Pump Controllers, Cables

fire pump controllers

Pump Monitors, energy generation services, Light Control Boxes

Cell Phone Operated Pump Set Controller, Electronic Controller

Solar Water Pump Inverter, PPT Series 10KVA to 400KVA 3Phase - 3Phase

Solar Pump Controller