Process Control Equipment Dealers in Bengaluru

We are offering temperature humidity controller.this micro controller-based instrument is basically a two channel process controller, which accepts two 4~20ma current inputs and display their corresponding process values of rh and temperature. It has two individual control set points, one for each channel with a variable hysterisis. In the normal mode, the user can set the control set point for both channels and their corresponding hysterisis. features 1. Bright led display 2. Push button operation 3. User friendly operation specifications input : 4~20ma inputs ×2 channels for rh and temperature set points: individual control set points for rh and temperature hysterisis: set able from 0~50.0 for both set points resolution: set able by changing the "d-pt" parameter range: set able individually from 0000 to 4000 counts control action: set able for heating / cooling logic. set point limit : set able from 0000 to range individually memory: eeprom memory with 100 years memory retention supply: 230v ac, ± 10%, 50hz. cutout size: 92mm(w) × 92mm(h) overall size: 96mm(w) × 96mm(h) × 115mm(d)

This is the simplest Basic water level Controller with indicator it is the most economical and energy efficient product from CS Water Technologies. Visual Indications : Two sump levels, Two over head tank indication. Flow, motor on, dry run, power on.Features: The water level controller can switch on or switch off the pump, to maintain the pre defined water level at the storage tanks. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. Its has the following unique feature:1) When tank is in reserve mode or empty it automatically starts the motors if water is present in the Sump tank.2) If water is present in the line it indicates the presence on the unit (Flow Indicator).3) It indicates water levels reaching in tank, which is helpful if there are open taps, blockage, leakage or damage in the pipeline connected to the upper head, ground or the desired storage tank.4) It green colored 2 level indications (half tank & full tank) of water in tank as well as 2 level indications (foot valve level & half tank) of sump tank.5) On motor symbol green colored indication for motor ON & red colored indication for dry run of motor.6) Has rocker switch to select Auto/manual operation.7) Has soft touch ‘NEED’ button to switch ON the motor irrespective of any level in the overhead tank. Application: mono block pumps (sump motors)System is suitable only for single phase pump sets of maximum 1 H. P. ratings. This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc. At large our systems not only help you but your neighbors and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.

We are one of the leading manufacturers and exporters of Intelligent Controllers in the market. Expert control and neurocontrol are two important approaches in intelligent control, but they are quite different in mechanism. Expert control imitates the reasoning aspect of human thinking, whereas neurocontrol simulates the imagination aspect of human thinking. It not only overcomes the difficulties of representing and updating knowledge but also solves the problems in neurocontrol that learning speed is rather slow and that control quality is not good enough during the learning process. Features5,000 cardholder capacity expandable to 8,0003,000 event bufferDistributed architectureBuilt-in clock & calenderUpdatable flash calenderOptimal capacity :2 access points (doors)8 programmable inputs8 programmable outputResetable fuse circuit protection

The Zigbee Development kit is based 2.4GHz IEEE 802.15.4 compliant System-on-Chip, the CC2538CC2650 from Texas Instruments. It acts as a ready platform to just get started with Zigbee or to build a ZigBee compliant product.

Thinture 'Temp-Eye' temperature control system is designed for automobiles. It withstands high operating temperatures, harsh environments, heavy vibrations, and still protects your engine from seizure due to over temperature. 'Temp-eye' can shut down the engine either by switching off the electrical supply to fuel pump or by stopping the fuel flow by using a special solenoid valve. Once temperature reaches 5 degree centigrade below the set value, 'Temp-Eye'  starts giving intermediate buzzer beeps which alerts the driver to stop the engine as early as possible. In case, even after the pre-warning signal also, engine is running 'Temp-eye' switches off the engine once temperature reaches set value. A digital output for vehicle tracking system, if equipped,  is provided  once temperature reaches warning area. An engine failure is always bad news. Besides taking away your wheels, it forces you to make a painful financial decision  

Demand control is a method of controlling the consumption not to overload the grid.Demand is calculated in different ways, different parameters depends on the regioncountry.

Product Features - Single Set Point 31/2 digit, 7segment LED temperature display Wide voltage range (85-270V AC / DC) Universal input (J / K / PT-100) LED indication for sensor, function & relay status. Sensor and function lock. Dual function (On / Off or Self tuned). Single set point with relay output. Over voltage protection. H3TX-Ua / TX7-Ua / EX9-Ua/H3TX-Ub : Single display for both process and set value. Temperature offset calibration user settable Single set point with relay output H3TX-Ub: 3 Digit, 7segment display for displaying temperature with height 0.4 “ H3TX-2U / TX7-2U / EX9-2U : Dual display for process and set value. Single set point with relay output Dual function (ON-OFF or Self-tune) Source voltage : 85 – 270 V AC / DC Range : 0 – 300˚C , 0 – 600˚C , 0 – 999˚C , 0 – 1200˚C , -100 – 300 ˚C Product Features - Dual Set Point Universal Input (sensor J,K,PT-100) Selectable Wide Voltage Range. ON / OFF or Self-Tuned Function Selectable Single / double set point. Over Voltage Protection. Compensation offset feature available in TX7-Ua User Friendly Programming through increment / decrement button (TX7-ua) Indication for sensor, function and relay status Program enable / disable for sensor, function, hystersis, compensation features in TX7-Ua.Dimension 72x72x128.5 2 set point temperature controller (heater type) : 85 – 270 V AC/DC 2 set point temperature controller (alarm type) : 85 – 270 V AC/DC Temperature range : 0 – 300˚C , 0 – 600˚C , 0 – 1200˚C

Controller for measurement and proportional control of pH, Redox, Chlorine and conductivity. AW 96 pH • Controller for measurement and proportional control of pH, measure 0.00-14.00 pH;• Microprocessor technology with digital control and LCD display;• n.3 indipendent set-points, free contact relay output On-Off;• 1 output relay selectable in proportional time-pause mode;• Hysteresi and activation delay selectables;• 4-20 mA output for recorder with galvanic isolation;• 4-20 mA proportional output, selectable on set-point2, with galvanic insulation;• Wall mounting box, IP65 protection degree;• pH electrode not included;• Standard power supply 230Vac. AW 96 Rx • Controller for measurement and proportional control of Redox potential over range 0-2000 mV;• Microprocessor technology with digital control and LCD display;• 3 set-points independently adjustable with On/Off volt free relay outputs;• 1 pulse proportional volt free relay output;• Hysteresis adjustment and programmable delay;• 4-20 mA output for chart recording with galvanic isolation;• 4-20 mAproportional output;• Vertical mounting version IP65 enclosure;• Redox electrode not included;• Power supply as standard 230VAC. AW 96 S Chlorine • Controller for measurement and proportional control of free chlorine over range 0.00-10.00 ppm;• Microprocessor technology with digital control and LCD display;• 3 set-points independently adjustable with On/Off volt free relay outputs;• 1 pulse proportional volt free relay output;• Hysteresis adjustment and programmable delay;• 4-20 mA output for chart recording with galvanic isolation;• 4-20 mA proportional output;• Vertical mounting version IP65 enclosure;• Chlorine electrode not included (A-CG);• Power supply as standard 230VAC. AW 96 S CD • Controller for measurement and proportional control of conductivity over range 0-20000μS;• Other ranges on request are 0-2000μS or 0-200μS;• Microprocessor technology with digital control and LCD display. 3 indipendent set-points, free contact relay output On-Off;• 1 pulse proportional volt free relay output and 1 timed pulse proportional volt free relay output;• Hysteresi and activation delay selectable;• Manual and automatic temperature compensation 0-100°C;• Temperature probe not included (compatible with A-ST1 probe);• 4-20 mA output for recorder with galvanic isolation;• 4-20 mA proportional output, selectable on set-point2, with galvanic insulation;• Wall mounting box, IP65 protection degree;• Conductivity electrode not included (compatible with A-CD probe with exclusion the termocompensate)• Standard power supply 230VAC. Model CODE DESCRIPTION ADW96PH AW-96 PH 230V ADW96PHF AW-96 PHF 230V ADW96RX AW-96 RX 230V ADW96CL AW-96 CL 230V ADW96CD AW-96 CD 0-20000 uS 230V ADW96CD1 AW-96 CD 0-2000 uS 230V ADW96CD2 AW-96 CD 0-200 uS 230V INSTALLATION KIT ADSP6020156 WALL FIXING BRACKET ADSP6020224 WALL ADAPTERFIXING BRACKET 4 SCREW

Being counted amongst the leading organizations of the industry, we are engaged in offering PID Controllers. These PID Controllers that are offered by us are completely tested under stringent quality norms. Besides, these PID Controllers easily available in varied specifications. Features: High performance Most reasonable price Effectiveness

ULDX-DM-02 The water level controller ULDX-DM-02 is a Dual PUMP controller type systems which can control Sump motor as well as Bore well motor (or sump motor). This system is suitable where both the motors are used to pump water to 2 INDIPENDENT overhead tanks.

Microprocessor based 96 sq mm Software linearization Digital calibration Any type of input or output

We are offering a wide range of Digital Temperature Controller efficiently fabricated by us. Digital Temperature Controller has one touch button on the front panel and can be set by using front panel keys. We are providing Digital Temperature Controller at market leading prices. Moreover, we give the timely delivery of Digital Temperature Controller at fixed time frame. Types : PT–100K. J Range : 0-1200° C0-199.9°C Specifications : Output : Relay contact, SSR O/PSet Points : Single set point, 2 set pointIndication : LED indication for O/P ON/OFF, 7 seg LED display for temperatureOperating Voltage : 230 VAC +/- 10% 50 HzTemperature : 0 to +50º CHumidity : 0 to 90% RH (Non Condensing) Sizes : 96 mm × 96 mm, × 100mm, ( Model BE-7000)72 mm × 72 mm × 60mm, (Model BE-9500)

The basic materials named as raw materials should be of top-notch quality in order to maintain the quality of the finished goods. Thus, our experts source the raw materials only from the reliable vendors. Apart from presenting the quality products, we deliver the same to the customers in the set time span.   Features Sturdy material Quality tested reasonably priced

Leader in linear positioning sensors and motors for manufacturing, solar panels and medical applications. Drive and air moving motors for blowers, pumps, fans, appliances, business machines, exercise equipment, aerospace and industrial.

The microprocessor based Temperature Controller is a high quality and user friendly product that can satisfy the user. The temperature controller has complete functions and utilizes a microprocessor that enables it to deliver fast results. The temperature has enhanced features that is critical to the user and is expected to raise quality levels and to expand production performances.

We offer intelligent power factor controller, elmeasure has introduced yet another innovative product called ipfc. It helps in controlling the power factor thereby avoiding the penalty imposed by the electricity supply company. it also saves cost, increases internal electrical system capacity and improves voltage drop at the point of use. This leads to an efficient electrical system. Unlike in conventional controllers, elmeasure’s power factor controller senses three phase voltage and current. This ensures the perfect controlling of power factor in unbalanced load conditions. It’s rightly called intelligent as it increases the life of the correction capacitor, by controlling based on the capacitor bank switching history. It is not just a pf controller but also a true multifunction meter. It has v, a, hz, w, var, and wh parameters in addition to pf. Hence this product is truly power packed. It also has rs485 communication option. This product can be used in all incomers as a pf controller and also as a multifunction meter.