Analytical Instruments Dealers

RA-915M mercury analyzer with RP-92 attachment is used for determination of mercury concentration in liquid samples (water, blood, urine). RP-92 attachment is intended to transfer bound Hg from ion to atomic form using “cold vapor” technique.

The Berthold moisture analyzers are used to measure the moisture in bulk materials such as coal sand wood chips and pellets clay fertilizer phosphate gypsum cereals bagasse The moisture measurement is carried out online during the ongoing process, providing rapid and precise real-time information on the current water content. The measurement is performed absolutely non-contacting, which lays the foundation for a long-term operation, free of wear and maintenance. The Microwave Transmission and the Radiometric Technology are the two main principles on which our analyzers are based. Both technologies complement each other perfectly so that we are able to provide you with the best solution – even for the most challenging measurement tasks.

Microprocessor Based pH-EC-TDS Meter model 1615 is a solid state instrument designed for precise pH, EC, TDS and Temperature measurements. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enchanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process 16x2 Alphanumeric LCD DisplaypH, EC, TDS & Temperature MeasurementsAuto Temperature CompensationAuto Buffer Recognition in pH ModeAuto Ranging Facility in EC ModeProgrammable Ref. Temp & Temp. Coeff in EC Mode90 Samples Storage FacilityPrinter Attachment Facility

FLOUR ANALYZER IS A POWERFUL NEAR INFRARED TRANMISSION METER CAPABLE FO MEASURING PROTEIN OIL AND MOISTURE IN CEREAL GRAINS AND PROTEIN , MOISTURE,  STRACH DAMAGE, WATER ABSORPTIONA AND ASH IN FLOUR

Repairing of Gas Chromatographs of various manufacturers like • Agilent • Chemito • Younglin • Hewlett Packard • Thermo • Carlo Erba • Varian • Unicam • Nucon • Shimadzu • Fisons • Data Lab • Perkin Elmer • Konik • Netal, etc.

The Fraction Collectors are specifically designed under the guidance of our skilled personnel using sophisticated materials procured from the renowned vendors of the industry. These are designed with utmost care ensuring to deliver defect-free products to our clients. It is compatible to be used with digital and analog circuits. These are widely appreciated for their accuracy. These comprise of Spider mixing unit for automatic injection. Thus, these can be offered to our client at affordable prices.

The PEM 9004 is a gas analyzer capable of directing and calculating up to ten(10) gas parameters, housed in a light. Weight and robust case. An integral sample pump draws a sample through the included 316SS probe and gas treatment system built in to the case. The analyzer utilizes microprocessor-based electronics with a back-lil LCD display and membrane panel. To provide easy-to-view readings and navigation of functions.

We are offering Diesel and Petrol Smoke Meter to the clients used for vehicles in work stations   Product Code : SAMS THR - 010

Steam & Water Analysis System (SWAS) In any Power plant running on steam, the purity of boiler feed water and steam is absolutely crucial, especially turbine, steam boiler, super heater, condenser and other steam equipment. To prevent damage of steam turbine, steam boiler and other apparatus due to scaling and corrosion, online steam and water analysis of critical parameters such as pH, Conductivity, Dissolved Oxygen, Silica, Sodium, and Phosphate etc is a must. The steam can be as hot as 560�C. The pressures can be as high as 250 bar. To keep the power plant up and running with minimum erosion and corrosion of steam turbine, steam boiler and condenser, we have developed fully integrated steam and water analysis system( SWAS) that provide exact, precise measurements on all these critical parameters. Globe offers customized steam & water analysis system (SWAS) to ensure your plant enemies (corrosion & scaling) stay away. Liquid Analysis: We use liquid analysis with unmatched accuracy, superior performance and worry free dependability. Sampling System: We offer our system with very high end sampling system with sample coolers, pressure reducing element (VREL), Back pressure regulatorRelief valve (BPRRV) and thermal shut off valve (TSV) The Analyser PanelRack- We design SWAS Panel Racks as per the plant requirement. All possible combinations e.g. Combined wet & dry section, free standing (open type rack)or walkway type (enclosed section) wet section, enclosed Dry panel can be provided. Complete solution ready to install at site: Complete SWAS system duly tubed & wired, in ready to install custom build container shell. Just connect sample and utilities to start monitoring.

Conforms to ISO 3930. NDIR technology. Engine RPM measurement facility. 7 Segment LED display. Automatic condensate discharge. Automatic zero calibration. Digital span calibration. RS232C serial port for PC interface. NOx measurement. Engine oil temperature measurement. Portable light weight design. DC operation suitable for “Road tests” using vehicle battery. Display of Lambda / AFR / PEF. Petrol / CNG / LPG selection. Indication for Low / High flow. Indication for battery Low / High voltage. Electronic leak check facility. Gas scrubber for cleaning of impure particles. HC residue test.

Fluke 438-II Power Quality and Motor Analyzer Overview The new Fluke 438-II Power Quality and Motor Analyzer adds key mechanical measurement capabilities for electric motors to the advanced power quality analysis functions of the Fluke 430 Series II Power Quality Analyzers. Quickly and easily measure and analyze key electrical and mechanical performance parameters such as power, harmonics, unbalance, motor speed, torque and mechanical power without the need of mechanical sensors. Fluke 434-II, 435-II and 437-II Power Quality Analyzer users can add motor analysis capabilities to their existing units with the Fluke-438-II/MA Motor Analyzer upgrade kit. How it works Using proprietary algorithms, the Fluke 438-II Power Quality and Motor Analyzer uses three-phase current and voltage waveforms to calculate motor torque, speed, load and efficiency at a 1 second update rate. The motor air gap field, as observed via the voltage/current waveforms, provides the basis for the measurements. Mechanical sensors and intrusive no-load motor testing are not required, making it faster than ever to analyze overall electric motor performance. Motor Types The Fluke 438-II can analyze both direct-on-line motors and motors powered by variable frequency drive (VFD) systems. The VFD must be a voltage controlled system (VSI) with a voltage / frequency range of 40 to 70Hz, and a carrier range of 2.5kHz to 20kHz. Electrical motor analysis The Fluke 438-II provides a complete breakdown of electrical parameters. Prior to beginning motor analysis, it's recommended to make base line power quality measurements to assess the state of harmonics and unbalance on the electrical service output as these two properties can have a serious negative impact, on motor performance. When in Motor Analysis mode, results are summarized for electrical performance, mechanical performance and derating (according to NEMA recommendations). The easy to understand four-level color severity scale indicates motor performance in relation to the recommended electrical parameter levels including rated power, power factor, unbalance and harmonics. For mechanical power you can instantly view the mechanical output power along with motor torque and speed. The mechanical output power is instantly compared with electrical power to provide you with live efficiency measurements. With this feature you can easily measure machine performance during each operation cycle. The NEMA derating screen is updated as the load and the electrical conditions change, and each new measurement is plotted on the tolerance graph as a "+". In this example we can see that motor is within tolerance but is close to the service factor. This indicates that there may be a need for power quality mitigation, motor maintenance or some other performance improving adjustment. By frequently performing these tests over time, known benchmarks and performance trends can be created, enabling informed maintenance investment decisions.

We maintain a steady supply of our products courtesy an ultramodern inventory management system and a high-tech storage facility. Our resources enable us to maintain year round products' availability. Our up-to-date logistic facilities support us in meeting the delivery deadlines promised to the customers.