Flow Meter Dealers in Chennai

nice 5005 and nice 5010 have gas savings ON/OFF bleed feature Available in very low to high flow capability Suited to specialty and general needs Mounting solutions for all situations All blenders are equipped with an audible alarm OxyM Medical Air/O2 blenders combine compressed Medical Air and Oxygen to deliver blended pressurized gas at a precise oxygen concentration (FiO2) firm by the user. Some models are equipped with a unique gas bleed ON/OFF switch to increase accuracy when needed, conserve gas, save money and time. These blenders are suitable for respiratory applications including routine therapy, ventilator gas supply, Bubble CPAP, SiPAP, Resuscitator and critically-limited NICU procedures. nice Neotech offer different models with multiple outlet ports that deliver the same highly accurate selected FiO2. Most models can be customized to include a flowmeter attachment with a variety of flow rates available. The blenders contain an audible alarm which warns the user if either of the gas sources changes by more than 30 psi from the other. Medical Air and Oxygen blenders require a bleed for accuracy. The bleed on a blender is activated by the knob which is placed on the right port. This avoids the blended gas being bleed into the air when the blender is not in use. High/Low Flow Blender Versatile dual range blender. Ideal for equipment needing flows from 2 -120 lpm, yet also capable of increased accuracy even at a low flow range. Low Flow Blender Perfect for NICU and Newborn Nursery or for a flow of 30 lpm or less. Increased accuracy at even the lowest flow range.

This sensor is specially designed for measurement or batch control of highly viscous fluids like glue, honey or oil. It allows an easy connection to transmitters like types 8025 and 8619 for more functionality. The design of this low flow sensor is based on the oval rotor principle. This has proven to be a reliable and highly accurate volumetric method of measuring flow. Exceptional repeatability and high accuracy over a wide range of viscosities and flowrates are features of this design. The low pressure drop and high pressure rating make it suitable for gravity and pump (in-line) applications and many others. All sensors provide Open Collector NPN frequency output and frequency output on Reed contact via 1-meter 5-wire cable.

Looking for a Tri-Clover® stainless steel flow meter for food, beverage, or pharmaceutical? The GPI Tri-Clover® flowmeter family is the one for you. The lithium battery powered electronic display G2 Tri-Clover® flowmeters are calibrated to read in gallons and liters per minute with two totals in which case one is resettable and gives you a cumulative flow total. All the G2 flowmeters are intrinsically safe, cost effective liquid flowmeters.     For more information

Scientific Devices Turbine Flow Meters are useful for liquids & gases in general industrial application. They provide excellent performance with quality & reliability. Suitable for as hygienic application. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick -of coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal.

Toshniwal offers a very wide range of flow rate indicators / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration. The Robust IP66, IP67 (NEMA Type4X) field enclosure is extremely rugged. The indicators are available with intrinsically Safe ATEX and IECEx approvals for gas and dust applications. The sensible menu driven structure ensures that programming can be done by your own crew saving cost and irritation. Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors. FEATURES Analog and Pulse outputs Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. (0)4 – 20mA. Displays total and flow rate simultaneously. Large digit selection for flow rate or total LED backlight. Ambient temperature: -40°C to +80°C (-40°F to 176°F). Various accessories are available for this product. Applications The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C and +80°C (-40°F up to 176°F). Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.

nice 5010 Air oxygen blender or mixer provides the mixed gas of up to 120 LPM. nice 5010 combine compressed Medical Air and Oxygen (O2) to deliver blended pressurized gas at a precise oxygen concentration (FiO2) when set by the user. Highly accurate delivery of FiO2 with knob adjustment from 21 to 100% Ideal for equipment requiring 2-120 LPM. Non-interchangeable input port for air and oxygen. Primary and auxiliary flow meter provisions provided. Bleed ON/OFF functions ensures more accuracy during low output flow. Highly audible pneumatic alarm when input pressure differentiates between 20±2 psi. Rigid aluminium body and highly precise mechanical components ensures the accurate mixture of input gases. Easy calibration makes it simple for end users. Blender is suitable for respiratory applications including routine therapy, ventilator gas supply, Bubble CPAP, SiPAP, High flow oxygen therapy, Resuscitator and critically-limited NICU procedures. Optional features of Air O2 blender/mixer include: Input gas pressure regulators, Input gas filters and customized fittings for flow meter for Air O2 blender and Air O2 blender with flow meter (cascaded).

Jameel Trading Company provides wide range of Flow Indicator, these type of valves are prefered by clients for itsdurability and long lasting life. Range of Products CONSTRUCTION :3 piece Design,Full Bore,Borosil Glass,Teflon Seated DESIGN AND MANUFACTURING STD.: As per Manufacturer's Standard END CONNECTIONS :Flanged as per ANSI B 16.S (1SO #) & as per BS 10 (Table D/EIF) & DIN STD.

Conforming to the specification and tolerance in accordance to I.S.-1199. Designed for the determination of the flow of the Portland cement concrete. The tabletop is 76.2cms. Diam finally machined from a solid casting the integral cast ribs are also designed for support and strength. The stand is fabricated out of cast iron and is on sturdy construction. Holes for mounting on foundation are drilled in the base plate. The ground and polished steel cam is designed to drop 12.5mm. Manually operated unit   Product Code : SAMS CVL - 007

Magnetic Flow Meters are suitable for flow measuring tasks and applications, including rapidly changing media, pH jumps, large amounts of solids or pulsating flow. Product versatility enables VersaFlow to deliver significant cost savings during planning, procurement, installation and training. A magnetic flow meter (mag flowmeter) is a volumetric flow meter which does not have any moving parts and is ideal for wastewater applications or any dirty liquid which is conductive or water based. Magnetic flowmeters will generally not work with hydrocarbons, distilled water and many non-aqueous solutions). Magnetic flowmeters are also ideal for applications where low pressure drop and low maintenance are required.  Maximum Pressure: 145 psi♦ Minimum Conductivity: 20 µS♦ Electrode Material: Hastelloy C4 (standard), tantalum (TGE optional)♦ Environmental Temperature: -5 to 55°C (23 to 131°F)♦ Electronics Housing: Local or remote (optional)♦ Liquid Temperature: 0 to 50°C (32 to 122°F) STD, 0 to 150°C (32 to 302°F) with remote electronics♦ Empty Pipe Alarm: 2" and larger sizes (EPD optional)♦ Accuracy: ±0.5% from 5 to 100% Qs, ±1% from 1 to 5% Qs♦ Range: 0.1 to 10 m/s (0.328 to 32.81 fps)♦ Outputs: Adjustable from 0.1 to 1000 gallons/pulse♦ Current: 4 to 20 mA with galvanic isolation♦ Frequency: 0 to 1000 Hz with galvanic isolation♦ Communications: RS485♦ Power: 24 Vdc, 115/230 Vac switchable (optional)♦ Consumption: 15 VA♦ Protection: IP67 Storage Temperature and Humidity: -10 to 70°C (14 to 158°F) at max; relative humidity 70%

The FCO752 offers a no-compromise approach to all production line flow measurement requirements. In addition to standard flow tests the FCO752 can be used for leak testing as well as carrying out blockage tests for determining partial blockages in products and components. Used to test a wide variety of different components including Exhaust systems, Laser drillings, Medical devices, Cookers, Gas Fires, Boilers, castings, and fuel pumps to name but a few. The FCO752 is quite possibly the most flexible, reliable, and diverse flow meter available today.