Powder Mixers Dealers in Chennai

The Double Cone Blender is efficient and versatile equipment for homogeneous mixing of dry powder and granules. This blender achieves absolute homogeneity in the blending of a wide variety of free-flowing, dry materials. This is accomplished even with dry materials, which are dissimilar in particle size and shape, because the double cone design interfolds the material regardless of its flow properties.   Design Highlights Three-side accessibility Higher clearance under discharge Small floor space requirements Competitively priced Dependable blending The slant double cone design eliminates dead spots which occasionally occur in conventional double cone mixer. The particle size reduction is minimized due to the absence of any moving blades. Shape of blender body results in a near complete discharge of product material, clearly an added advantage over horizontal blender. Blender rotates, the material at the sides nearest the axis starts to cascade first, striking the sloping sides of the cone where it is deflected toward the centre. The progressive cascading action moves material from the smallest axial radius and toward the centre. The speed of the unit determines the point of rotation at which the material starts to cascade. A second action takes place simultaneously with the cascading action. Material falling into the middle of the blender spreads apart as it falls, mixing with the material flowing inwardly from the sides. The double blending action is so rapid and effective that particles of different physical properties cannot separate, and are interspersed uniformly throughout the batch. The blending action continues as long as the blender rotates. Discharge is rapid and complete. There are no corners or vanes to hold or carry material from batch to batch. Both charging and discharging action are by gravity flow and arranged so that the blender may be installed in a continuous process operation Application Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

From Chennai, Tamil Nadu, we are offering V Shape Double Cone Blender which is fabricated using high grade steel and most advanced machinery. We are capable of handling small or bulk orders of the blender for our customers. We are well-reckoned as the Manufacturer and Supplier of V Shape Double Cone Blender and offer it at minimal rates.   Octagonal BlenderFeatures : Contact parts in stainless steel 304 or 316 Octagonal shaped with rectangular center, conical discharge frustum and rectangular top frustum Baffles provided in the shell Manhole with gasket is provided to fix baffles and for ease of cleaning the shell Charging and discharging is through a butterfly valve. A conical adaptor can be provided for fixing charging drum after butterfly valve Unit can be provided with bin charging arrangement All moving parts are enclosed in guards A safety railing with a limit switch is provided for operator safety · Manual Inching arrangement can be provided Flame - proof motors with flame - proof push button stations can be provided. V Shape BlenderFeatures : The "V" shape gives sufficient continuous movement to the granules, result in good quality Suitable for dry mixing of products in powder form. Easy for loading and unloading. Easy for cleaning. All contact parts are made out of SS316 or SS316 L quality material, as per customer requirement. Simple design requires minimum maintenance. General structure & safety guards made out of mild steel & colored in Standard Model and made out of SS304 & polished to the matt finish in GMP Model Manual rotating facility with hand wheel for inching Conta BlenderFeatures : 0° stopping for easy docking and undocking of the bin. A suitable fencing around the cage with an entry point for the bin on detachable trolley. Limit switch on entry door to prevent the accidental operation of the cage. Flexibility of accepting variable bin sizes providing wide range of batch volumes. cGMP construction with cladded polished S. S. sheets. The charging hole with cover is provided on top with quick opening and closing arrangement with dust proof joints for particle free transfer. Built-in Butterfly valve (150 mm dia) at the bottom suitable for discharge. Suitable leak proof vent on top. Highly effective for low volume active blending with as low as 1 % active. Processing of different sizes of production batches in single equipment with scale up data. Double Cone BlenderFeatures : The conical shape at both ends of Double Cone Blender enables uniform mixing and easy discharge. All contact parts are made out of SS316 or 316L Maximum care has been taken to ensure safe operation of Double Cone Blender. Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. Two nos. of safety road will be provided at back side. Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning. Cones of the Double Cone Blender will be mirror polished from the inside & outside & structure will be matt polished. All moving parts of the Double Cone Blender are covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch. The conical shape at both ends enables uniform mixing and easy discharge. Worm reduction gear use for speed reduction. Food grade rubber gasket will be used on both end of cone as well as in butterfly valve. Inside & outside of the cone will be polished to the mirror finished. Hand wheel will be provided for manual tilting of cone.

The    Doris Ribbon Blender     is    most    suitable    for     Mixing    Dry     Products.    The    Blender    uses    large     surface     area    to    volume    ratio    while   mixing.    Available    in     standard    sizes    in    Mild     Steel    &    Stainless Steel.    Ribbons    made    in    Double     Helix    Agitator    for    fast    &    quick Mixing. Mixer is designed for easy cleaning & Quick batch changing. Every Ribbon Blender is backed up by service facilities offered by our company.

Our double cone blender is the most suited machine with efficient design for rapid blending and mixing at low operating speeds. The design consists of shallow vertical cylinder with a cone of carefully engineered angle located at each end. If desired, the products mixed can be directly dicharged into the container by the means of a butterfly valve fitted at the end of the cone. All the contact parts are made of stainless steel. The blender is available either in M.S. Or S.S 304/316 materials. The drive consists of a motor coupled to a suitable gearbox to give the desired RPM.We also offer optional attachments such as the flame proof drive and Jacket arrangement for heating and cooling. Capacity: We offer double cone mixer in various capacities ranging from 100 liters to 1000 liters. Applications Pharmaceutical Food Chemical Cosmetic products and many more. Features It is conical in shape at both ends ends. This allows uniform mixing and easy discharge. To avoid any excessive load on the gear box and motor, the cone is statically balanced. The powder can be loaded into the cone through the wider opening. The powder can be discharged through a mucon valve or a slide valve. Depending upon the product, we can provide paddle type baffles on the shaft for better mixing. This blender can also be operated by a timer. The contact parts are manufactured of either SS 304 or 316 On customer request, we also supply flame proof motor as an optional.

Horizontal Blenders can be customized to meet each individual customers needs. Available in Commercial Duty, Standard Duty, Heavy Duty and Extra Heavy Duty construction. Each Blenders is sized and engineered to meet our customers specifications. The units are available in carbon or stainless steel construction and optional seal, spray lines and gate designs can be recommended. Jacketed units are manufactured to meet heating and cooling requirements.   APPLICATIONS   Pigments and Resins Chemicals Detergents additives Herbicides Insecticides Teflon Flakes Roofing Products Architectural Coatings Detergents additives Hazardous Waste Stabilization Cement and Grout Brake Lining Compounds Compounds Carbon Black and Graphite Wood Flour and Pigments Tobacco Products Tea Leaves Coffee Spices Baking Ingredients Cereal Ingredients Vitamins Pharmaceuticals

ADHISAKTHI is manufacturing a wide range of equipment for personal care division and pharma machinery division. Manufacturer of these products, we have invested towards the development of new technologies that are in tune with the international standards and regulations. This has assisted us to up our strength in the Personal Care Machinery Division and become one of the far-famed Personal Care Machinery Exporter from India. In the Pharma Machinery Division, we manufacture machinery for the processes of powder mixing. To sustain our reputation as the best Powder mixer Machines Manufacturer, we have invested substantially in acquiring latest manufacturing technology and machines. We are having two deferent kind of mixers of following. Ribbon Blender Plough shear mixer

DCB is designed for effective homogeneous mixing of dry powder and granules The trough shape is central cylindrical with top and bottom conical sections Complete Double Cone trough would be made up of SS304 Trough tumbling action ensures homogenous mass mixing Particle size reduction is minimized due to the absence of any moving blades The shape of blender results in a near complete discharge of product material 2HP motor gear box for medium powder blending application Btm discharge options with shutter/valve type placed suitably The basic frame would be made of powder coated MS leg support The top side is fitted with the view glass Discharge door with hinged supports at bottom is provided for discharge

Gentle and efficient blending of free-flowing solids in powder and granular form in dust-proof enclosures, with liquid spraying device.   \User Industries   Pharmaceuticals Chemicals Bulk Drugs Agro Chemicals Veterinary Medicals Food

DOUBLE – CONE BLENDER / MIXER S.S. 304 Quality STD/GMP Model Silent Motor Single Phase power 5kg/ 10kg/ 20kg and 250kg Capacity.

Tank Mixers, Vacuum Systems, Ejectors, Gas Jet Compressors, Chlorinatio

ribbon blender & mixer, Mill Spare Parts, Auto Rickshaw