Temperature Sensors Dealers in Tharamani, Chennai

HI7662-A is a stainless steel temperature probe for the HI921 Autosampler. The HI921 Autosampler interfaces directly with the HI902C to access titration methods. High accuracy thermometers provide the versatility, speed, and reliability required by users in all areas concerning temperature measurement. Speed is important when the reactions being monitored have the potential to change rapidly. pH readings must be temperature compensated in order to obtain accurate results. The source of temperature measurement can be from the HI7662-A Temperature Sensor or from a trimmer that is manually adjusted. In either case, the instrument is adjusting the pH reading to compensate for changes in the pH sensor. Temperature compensation provides the actual pH of the buffer or sample at the temperature of measurement. Temperature compensation can be obtained in three ways: A separate probe specifically for measuring temperature A probe with a temperature sensor built-in Manual adjustment for temperature

DUAL ELEMENT PYROELECTRIC SENSOR DIGITAL SIGNAL PROCESSING (DSP) DETECTION RANGE UP TO 12M DETECTION ANGLE UP TO 110° SELECTABLE ZONE NUMBER JUMPERS SELECTABLE ADDRESS JUMPERS ABS HOUSING

• Type: K, J, T, E, N, R, S & B Simplex / Duplex.
• Standard: ANSI MC 96.1 / DIN 43710 / IEC 754.
• Insulation: Ceramic beaded / Mineral Insulated.
• Junction: Grounded / Ungrounded / Exposed.
• SIZE:  
• Base Metal: 22 / 20 / 16 / 14 / 12 / 10 SWG.
• Noble Metal: 27 / 26 / 25 / 24 SWG.
• Ceramic beaded:  
• Sheath: SS 304 / 316 / 310 / 446 / Incolloy / Inconel.
• OD: 3 mm to 25 mm.
• Sheath: SS 316 / 310 / 446 / Inconel.
• OD: 1 / 1.5 / 3 / 4.5 / 6 / 8 mm.
• Termination: Plug and Socket, Head Assembly, Flying Leads with lugs and Special Construction.
• Extension: Fiber glass / PTFE / SS braided
• P.C: Compression fitting, bayonet fitting, Screwed.

• Temperature Range: -200 to 600 deg C
• Application: Industrial
• Sensor Connection Wiring: 2 Wire
• Probe Length: 0 - 150 mm
• Probe Diameter: 0.5 - 8 mm
• Cable Length: 1 m
• Process Connection Type: Bayonet
• Termination Type: Lead Wire
• Probe Material: Stainless Steel

• Input: 3 wire RTD/PT100/CU 53/Thermocouple (K/R type) 
•  No.of channels:  to be specified
• Range : Configurable 
• Accuracy : /- 1% 
• Display : Seven segment LED(Min 0.5"),3 1/2 Digit for Temp & 2 Digit for channel No. 
• Scan Rate : Min 6 channel per second 
• Indications : Alarm & Trip,open & short Circuit indication 
• Output Relay : 2 Nos,one for alarm & one for trip.,& each Channel can be configured for these relays,it can be configured for no.of input crosses set limit for Alarm/Trip/Rate High/Rate low 
• Contact Rating : One change over contact.5A@240V AC/2A @ 24V DC 
• Delay : 0-15 Minute,adjustable for Alarm and Trip separately 
• Display : Either in Auto or Manual,set point indications,various Parameters Indications 
• Power Supply: 240V AC,50HZ 
• Features  : High mechanical strength, Long functional life, Easy to carry

• Application: Industrial
• Color: Yellow
• Features: Various types
• Country of Origin: Made in India
• Cable Length: 1 Meter
• Sensor Size: Beed type / Stemp type RTD

Flame Proof RTD Sensor, Rotameter - Metal Tube

Sensor & Temperature Controllers, Autonics Temperature Controller

industrial electric ovens, Infrared Heaters, Heating Equipment, Heaters

portable temperature sensor, Gas alarm, Body Protection

industrial electric ovens, Infrared Heaters, Heaters, Furnace