Industrial Control System Dealers in Khyala, Delhi (86 products available)

The company is a prominent AMF Panel Manufacturer, Exporter and Supplier from India. Available in customized specifications, the AMF Panel is used to manage DG sets in an efficient manner. Our AMF Panel is a microprocessor based module featuring hinged doors, undrilled bottom gland plate, indicators, pushed buttons etc. Also, it is specifically designed with MCB for short circuit protection.

We are offering heat control panel manufactured by our manufacturing unit is available in a wide assortment of variety. Electric heater control panel can control temperature through 64 different temperature control panels in it with pid controller. Complete body of the control panel offered by us is made of stainless steel which can be used in various industries and laboratories. We are having global clients for our heat control panel because we serve them with quality product. We lead to the digital heat control panel exporters from india and deliver our orders at reasonable prices.

We have a crowning reputation in manufacturing, supplying, and exporting of MCC Panel. The instrumental use of MCC Panel is to control the electric machines in various industries. Our MCC panel is made up of the finest quality of raw materials and components. They are strongly built, corrosion resistant, low on maintenance, and high on performance. They are available are the leading market prices.

• Features: Shock proof , Industry approved design , Reliable

We are one of the recognized names in the industry for designing, keeping in mind the specific requirements of the clients, and providing an array of Electrical Panels some of which are listed below. These panels are made of good quality materials in accordance with industrial quality standards. These find their application in commercial buildings, hospitals, industries, dairies, telecommunications, research laboratories etc.  Synchronizing Panel.  

Before making the final dispatch, our entire lot is carefully stored in our capacious warehouse under the administration of experts. Thus, there are minimal chances of defects at buyer's end. Get in touch with us for placing small as well as bulk orders, timely deliveries will be straight to your doorstep! Features : Precise design Easy to install Strong construction

• Application: Control Panel
• Color: Grey
• Voltage: 220V
• Body Material: ABS
• Power: 1-3kw
• Power Source: Electric
• Phase: Double Phase, Single Phase, Three Phase

Features Micro-controller BasedSupports 2 Wire International Standard Smoke Detectors.10 Zone Fire Panel.Facility to Attach Speech Dialer.Panel Can Be Integrated with Standard Industry Products.39 Individual Leds Indicate Status.Solid Metal Box with Transparent Cover.Cabinet Closed with a Lock and Key to Restrict the Access.Individual Zone Indication in Case of Fire.Individual Zone Indication in Case of Short Zone.Individual Zone Indication in Case of Open Zone.Common Tamper Led for Open or Short in Any Zone.Panel Can Be Programmed By a User Code.User Programmable 3-7 Digit Code.Panel Can Be Armed or Disarmed Through Code or a Dedicated Key.Any Zone Can Be Omitted.Manual Call Points Can Be Operated Even When Some Detectors have Been removed.12 Event Fire Memory Log.Sounders Start Automatically When Fire is Detected.Sounder Time Can Be Programmed from 2 to 20 Minutes.Single Dedicated Key to Arm the Panel.Single Dedicated Key to Manually Start Sounders.Single Dedicated K Ey for Zone Led Test.Single Dedicated Key to Switch Off the Sounders and Disarm the Panel.Single Dedicated Key for Drill Exercise.Non-volatile Memory.Two Sounder Outputs, Each Can Switch 1 Amp.Higher Power Sounders Can Be Attached Through An Inbuilt Relay.Sealed Maintenance Free Battery Backed 24v Power Supply (provision for Battery).Built in Battery ChargerBattery Space Provided Within the Panel with Plug in Connectors.Low Battery IndicatorBlown Fuse Indicator for Dc Fuse.Mains Power Indicator.Aesthetically Designed.

Used in panel boards spare parts voltage stabilizer and transformers quality product affordable rate superior quality.

We bring forth Control Panel Components of the superlative quality for the countrywide market. We are enlisted with the chief Manufacturers and Suppliers of Control Panel Components in Delhi. We fabricate the components by giving painstaking attention to even the minutest details. And the material used in their fabrication is of the best quality. Plus, we can entertain the demand for customization. Count on us!   Range : Chillers / Chill Blocks    Bus Bar Link    SS Stack Assembly : Pressure Plate, Pressure rods, Chillers

We manufacture all kinds of Plastic control cables parts.  

• Material: Metal
• Shape: Rectangle
• Application: Industries
• Frequency: 50Hz
• Power Source: Electrical
• Feature: Dust Proof, Light Weight

We are counted amidst the prominent Electric Panel Board manufacturers, exporters, and suppliers in india. All kinds of electric panel boards are available with us, in order to meet the specific requirements of the clients. The electric panel board ensures optimum safety and higher performance. Moreover, our electric panel board is designed as per the standards of the electric industry.   Appreciated For High durability Sturdy construction Excellent performance Advanced features

  PYROTECH offer a wide range of Control Panels for various industries/applications and custom built panels for specific requirements. These are precision fabricated in CRCA sheet enclosures, well engineered and aesthetically designed. It meets diverse technical requirements under stringent and varying site conditions, and utilize floor space more efficiently. High quality powder paint is sprayed and baked at high temperature. The products include: Instrumentation Panels, Control Desks, Electrical Panels(Motor Control Centres, Power Factor Improvement Panels, Ligthting Panels and Starter Panels), PLC panels for Plastic, Printing, Hydraulic, Kneader machines, Mixing Mill and many more.

We provide an exclusive range of Glow Sign Boards that is extensively used by the malls, shops and various other sectors for the promotional purposes. We have firmly positioned ourselves as one of the flourishing Advertising Glow Sign Boards Manufacturers based in India. Commercial Glow Sign Boards offered by us are available with lights that enhance their appeal. Furthermore, we also offer installation services of these boards. Our Commercial Glow Sign Boards are manufactured using bright and fade resistant colors along with modern graphics. Special Attributes of our Glowing Sign Boards Appeal enhancing lightsShock proofPrecisely designedConsists of bright colorsFade resistant colors Used by MallsShopsHospitalsBanksCommercial AdvertisersTheatres, etc.

Suitable for Automatic Door Lift. Door safety sensor interface. Speed Up to 1.5 m/s for open-loop, 2.2m/s close loop. Two tier spped control logic to avoid over travelling due to failure of floor position sensor. Auto Shut Down case of failure of door acknowledge I/P's. Door Control O/P's multi Speed with door status acknowledge I/P's. Single Speed Manual Door Controller Supports upto 16 landing with DOL Wye/Wye-Delta starar for single speed lift. Supports simple gate lock contract & pre gate look configuration. Electronic single phasing/reverse preventer. Speed upto 0.7 m/s for open-loop. Multi Beam Door Sensor The installer must align the RX and TX sensor units correctly for smooth and reliable operation. How to mount and align the units correctly for center openings doors? Check and adujst alignment of car doors. Car doors must be vertically plumb and in line with earch other. Follow the lift manufacturer's guidelines if you need to adjust them. Mark positioning of D200 sensor units on car doors. Units must be in horizontal and vertical alignment (if necessary, use packing to align the units). Leave a gap of 1/4" between bottom units and car sill. Leave a minimum gap 1/4" between units when the doors are fully closed. After installing the sensor units check alignment and adjust with packing if necessary.

• Features: Reliable functionality, Longer service life, Low maintenance .
• Item Code: UB-5315

Automatic Power Factor Control Panel (APFC Panel) For maintaining the power factor according to the load factor, proper capacity of capacitors is to be connected. The value of capacitors to be connected will vary with respect to load and its existing PF The power factor can be maintained by installing Automatic Power Factor Control Panel (APFC Panel). APFC Panel has microcontroller based programmable controller which switches the capacitor banks of suitable capacity automatically in multiple stages by directly reading the reactive load (RKVA) which works in the principle of VAR sensing tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4 to 12 according to the load pattern. Our quality centric approaches help us to provide best range of Power Factor Control Panel (APFC Panel). With the use of best electrical switchgears, we design highly advanced and superlative products for several applications. We test them on several parameters and safely supply these products to various commercial clients. Our products are highly reliable and are available at economical price range. Install APFC Panel to avoid penalties and enjoy the benefits automatically.   FEATURES :- Spacious capacitor mounting on base plate- APFC meter with 10 VA, class-1 Current transformer- APFC relay with function of auto sensing- APFC relay is easy to set all parameter- Wiring diagram fixing at panel- Available protection IP54, IP55 / IP64, IP65

We offer customized solutions for trouble free distribution of electric power. Panel box is a power distribution board with MCCBs as incoming and outgoing switching-cum-protective devices, for distribution of power to various loads as per the requirements of the system. The modular construction of panel box renders the customary panel building redundant by virtue of compactness, reduced cost and short delivery time coupled with reliability of the various modular units. All units are fabricated using sheet steel of 1.6mm and are epoxy powder coated to give a superior finish.

• Brand: CII
• Panel Type: PLC
• Display Type: Digital
• Frequency Range: 50HZ
• Usage/Application: INDUSTRIAL AUTOMATION
• IP Rating: IP55

We are engaged in manufacturing and supplying of Control Desk in India.

• Phase: Single Phase
• Material: Mild Steel
• Automation Grade: Manual
• Brand: Newchrom Technologies
• Display Type: Analog Display
• Pressure (kg/cm Square): 0-7 Kg/cm2
• Mounting Type: Wall mounting
• Weight (kg): 2 Kg
• Accuracy: 99.99%
• Usage/Application: Gas industries

• Power: 24 VDC, 900mA, 9.6W
• Mounting Type: Panel
• IP Level: IP20, IP65
• Package Type: Box
• Memory Size: 24 KBytes
• Dimension: 166.5x107.5 mm
• Pin Count: 16, 32
• Maximum Operating Temperature: 0-55 Deg C

• Brand Name: Mishi
• Application: Hospital
• Model Number: Mishi-NCU
• Type: Wired
• Country of Origin: Made in India

We are engaged in manufacturing, exporting and supplying premium range of HT Panel Accessories that is made using the high grade raw materials as per the needs of the users. Our HT Panel Accessories is highly used in the high tension panel parts. Features Optimum quality High strength Long functional life Dimensionally accurate Material of Construction CRP Furner Copper Aluminum Plastic parts

We are offering plc panel . doon engineers & consultants offers a well designed plc panel all across the country. These plc panels are durable and long lasting in nature. We also offer customized plc panel as per the special design, dimensions and specifications of the clients. The plc panel are made available at reasonable prices. attributes perfect structureeasy to installhigh efficiencylow on power consumption

• Voltage: 20 - 26 V.D.C.
• Alarm Current: 180 ma
• Weight: 565 gm
• Colour: Red
• Material of Cons.: MS
• Zone: 2 Zone to 16

• •Frequency: 125KHz
• •Number of cards: 1,200
• •Number of readers: 1 built-in
• •Interface: RS232-TTL

Your only choice for home security solution.•The optional external proximity standard/keypad Wiegand reader.•Input Ponits : 2 NV input•Output : 1 relay•Dimension (mm) : 83W x 121H x 32D 

Metal Box, Weight Scale, Platform stacker, Electronic Platform Scale

Control Panel, Temperature Controllers, Spray Nozzles

thyristor power factor control panels, Automatic Power Factor Control Panels