Pharmaceutical Processing Equipment Dealers in Tri Nagar, Delhi

Interested buyers can place orders with us, timely delivery of the same are our foremost concern. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts.   Available in : 100/150/200 ton hand operated. 100/150/200 ton Electric operated. 100/150/200 ton Electric operated with digital display.

The Vibro sifter unit consist of Specially designed vibratory motor to run on 400/440V, suitable HP, 3 phase, 50 cycles electric supply .

We are reckoned as the prime digital compression testing machine manufacturer, exporter and supplier in india. Our digital compression testing machine is provided with a pace rate indicator, which indicates pace rate on a bar graph. The pace rate can also be manually adjusted while the test is going on. comprises of loading unit : the loading unit is of fully welded construction having a cross head, base and solid plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided complete with ball seating arrangement.pumping unit : the two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. the digital read-out unit, incorporates a 4-digit display, calibrated in kn and features integral load pacing in kn/sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings upto 100 complete runs/tests can be stored in the memory.

Compressive Strength The failure loads of mortar cubes can vary considerably according to the type of cement and the period of curing. However, a capacity between 50 kN and 500 kN encompasses the majority of test conditions. A 500 KN Compression Testing Machine is suitable for testing mortar cubes, cement mortar and pozzolana cubes of 50 mm. For details see under SCO-1040. SCE-1003 Flexural Strength4 kN Flexure strength Testing Machine,Electrically Operated,IS: 1727, 4031For the Transverse test of pozzolana and cement mortar prisms (Rilem Cembureau test) by single point loading of a 60 mm long prism supported at 100 mm centers. Smaller loads, less than 10 N, can be applied and measured with an accuracy of 1% in the upper four-fifths of the range. The load is increased at the rate of 40- 60 N/sec. Supplied complete with: Proving ring of capacity 4KN and Flexure Test Attachment. Gauging TrowelIS: 4031, IS: 5515 SCE-1004 Gauging Trowel, IS: 5515,200 mm long blade Weight 210 ± 10 g SCE-1005 Gauging Trowel, IS: 4031, 150 mm long blade with straight edge. Weight 210 ± 10 g SCE-1006 Gillmore Needle ApparatusASTM C 91, C414, C266, AASHO T154 For determining setting time of hydraulic cement. The apparatus consist of a base plate with a vertical shaft and two horizontal arms, the lower arm being adjustable for height. Supplied complete with one initial needle, one final needle and a base plate. Replacement Parts SCE-1006001 Initial Needle 1/12-inch dia. ¼ lb. wt. SCE-1006002 Final Needle 1/24-inch dia. 1lb.wt. SCE-1006003 Glass base plateJaw Crusher Designed to speed-up crushing of aggregates, Ores, Mineral, Coal and similar materials Compact and rugged for laboratory and small production units Manganese steel jaws adjustable for 6 mm opening Supported with strong steel frame SCE-1007 Jaw Crusher of 12 SCE-1008 Jaw Crusher of 6The specification is as follows.1. Single Toggle Jaw crusher size 4" x 6".2. Motor 3 hp /3phase/415 volt/50 cycle. 3. Jaws Speed 350 rpm 4. Jaws 10-12 Mn steel. 5. Bearing Bush type 6. Feed size 25 - 30 mm 7. Product Size 6-20 mm 8. Capacity 200 - 250 kg /Hour SCE-1009 Jolting Apparatus IS: 10078, 1982The jolting apparatus consists of a rectangular table, rigidly connected by two support arms to spindle at a horizontal distance of 800 mm from the center of the table. The table can be raised and allowed to fall freely by a cam, which is connected to a motor. The cam rotates at a rate of 60 rpm. A stroke counter, fitted with micro switch, is provided, which stops the machine after 60 jolts. Locating pins are provided for mounting the mould compartments on the table. The mould, surrounded by the hopper, can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation with 230 V, 50 cycles, single phase, AC Supply.

Stainless Steel Scoop, Stainless Steel Sink, Stainless Steel Baske

Vibro Screening Machine, Pre Cleaner HC 70, Stone Separator PR 1

Compression Testing Machine, Asphalt Cutting Machin

Box Compression Testing Machines, Universal Testing Machine

Pharmaceutical Equipment, Construction Machinery, Curing Tank, Water Bat