Point Load Tester Dealers in Karol Bagh, Delhi

Used to determine the strength values of a rock specimen both in the field and in the laboratory. It consists of a load frame for applying loads up to 55 KN, on which a manual hydraulic jack is mounted. The instrument accepts core specimens up to 4” (101,6 mm) diameter which are loaded by two coneshaped points. A graduated scale indicates the distance between the conical points. The applied load is measured by a pressure transducer with a digital display unit range 0-56kN, 65.000 divisions, 0,001 kN resolution, accuracy: ± 1%. The strength index (IS) is got by the formula P : D2 where P is the strength and D the space between the two conical points.Accessories: EKE 206-DG 001 Set of Hardened Conical Cone EKE 206-DG 003 Lower Plate and Upper Plate with seat ball to modify the Point Load Tester into a portable compression test- Technical Specifications Model Number : EKE 206-DG Dimension : 400x530x720 mm. Weight : 25 Kg

Product Code: EKE 206-1 Standrad: IS:8764 Equipment is light and portable Rock core specimens can be tested without any preparation The instrument can be used in the laboratory as well as at the drilling siteThe results of the test may also be used to predict the uniaxial compressive strength of rock   With this instrument, a wide range of core sizes can be tested The frame has adequate adjustments to align perfectly the loading axis passing through the centre of the bearing plates and loading platens at position of the ram of the hydraulic jack   ENKAY introduces Point Load Index Tester, a rock testing instrument for determining the Point Load Strength Index of rock cores and irregular lumps which may be tested without any treatment. The Point Load Test is primarily an Index Test for strength classification of rock materials. This instrument is mainly intended for field measurements on rock specimen, but it can also be used in the laboratory. The results of the test may also be used to predict the uniaxial compressive strength of rock from corelations.   The apparatus is light and portable, and can be used in the laboratory as well as in the field.   The equipment comprises the following:   EKE 20601 Loading Frame, fitted with Hydraulic Jack,hand operated, capacity 100 kN (10,000 kgf)EKE 20602 Load Gauge, 0 - 25 kN (2,500 kgf), x 0.25 kN (25 kgf)EKE 20603 Load Gauge, 0 - 100 kN (10,000 kgf), x 0.50 kN (50 kgf)EKE 20604 Conical Loading Platens  

Point Load Index tester, a rock testing instrument for determining the Diametrical Point Load Strength Index of rock cores and Irregular Lumps which may be tested without any treatment. The Point Load Test is primarily as index Test for strength classified of rock materials. This instrument is mainly intended for field measurements on rocks specimen, but it can be used in the laboratory. The results of the test may also be used to predict the uniaxial compressive strength of rock from correlations. The apparatus is light and portable and can be used in the laboratory as well as in the field   Features: Equipment is light and portable Rock core specimens can be tested without any preparation The instrument can be used in the laboratory as well as at the drilling site The results of the test may also be used to predict the uniaxial compressive strength of rock. With this instrument, a wide range of core size can be tested The frame has adequate adjustments to align perfectly the loading axis passing through the centre of the bearing plates and loading platens at the position of the ram of the hydraulic jack   The equipment comprised the followings:A. Loading Frame, fitted with Hydraulic Jack, hand operated, capacity 100 KN B. Load Gauge, 25KN (2,500 kgf) to read upto 0.25KN (25kgf) C. Load Gauge, 100KN (10,000 kgf) to read upto 0.50KN (50kgf) D. Conical Loading Platens. E. Diaphragm Bolt.

Point Load Index Tester, IZOD IMPACT TESTING MACHINE