Spectro Group of Companies Okhla, Delhi

We are offering zoom stereo microscopes. trinocular observation head binocular body inclined at 45 degree. Diopter adjustment ring on both ocular tube. Interpupillary distance from 55mm to 75mm. Lateral zoom control movement. eyepiece wild field eyepieces 10x (paired) fov 22mm objectives zoom 0.62x to 5x twin with magnification ratio of 7:1 mechanical body inclined and transmitted light system with 12v-10w halogen tungsten lamp. The system regulated with transformer has intensity control knob, three on/off switch to provide flexibility to use either both light or any of them. Clip for holding specimen. magnification 6.2x to 50x (with 1xobjective) 250x (with 25x eyepiece) & 2x auxiliary lens) working distance : 82mm 115mm (with 1x objective) 211mm (with 0.5x auxiliary lens

The X-STRATA-980 Jewelry Testing Machine offered by us is robustly constructed with latest technologies. This cost-effective Jewelry Testing Machine combines a high power X-ray tube and high-resolution detector to deliver low limits of detection and thin coating analysis.

We are offering x ray tube. x-strata980: combines a high power x-ray tube and high resolution detector to deliver low limits of detection and thin coating analysis. specifications x-ray excitation : 100w (50kv and 2ma) micro-focus tungsten anode tube detector:25mm2 pin detector with peltier cooling filters/collimators : up to 4 primary filters up to 4 collimators (0.1, 0.2, 0.3, 1.27mm ã¸) digital pulse processing:4096 ch digital multi-channel analyzer automatic signal processing including dead time correction and pulse pile up rejection computer/display/os : celeron, 1.86 ghz, 40 gbhd, 512mb ram, equivalent or better 15â��lcd, 1024 x 768 microsofttm xp sp2 power supply 85~130 or 215~265 volts, with frequency range of 47hz to 63hz working environment: 50â°f (10â°c) to 104â°f (40â°c) and up to 98% rh, non-condensing xyz travel 203 x 152 x 216 mm (8 x 6 x 8.5â��) fully programmable benefits x-strata-980 1. Simultaneous multi-layer coating thickness and/or composition analysis 2. Rapid analysis of hazardous substances (rohs, elv, weee, pb in toys and children's products) 3. Alloy identification and chemistry analysis 4. Non destructive gold and precious metals karat assay 5. Detection of counterfeit electronics parts 6. Multi-element plating solution analysis 7. Giant chamber for the analysis of large samples.

We are offering x ray fluorescence analyser. cmi900: is a robust, cost effective, and high performance x-ray fluorescence (xrf) analyser for measurement of coating thickness and material composition. specifications x-ray excitation : 50 w (50kv and 1ma) micro-focused w anode tube detector: xe filled proportional counter with secondary filtering digital pulse processing: 4096 ch digital multi-channel analyzer automatic signal processing including dead time correction and pulse pile up rejection computer:pentium d, 3.0 ghz, 160 gb hd, 512mb ram with microsofttm xp **equivalent or better power supply: 85~130 or 215~265 volts, with frequency range of 47hz to 63hz working environment: 50°f (10°c) to 104°f (40°c) and up to 98% rh, non-condensing table travel (xyz programmable) 6” x 7” x 1.9” (15.2cm x 17.8cm x 4.8cm) benefits cmi-900 1. Multi-layer metallic coating thickness measurement alloy identification 2. Composition analysis of up to 15 elements simultaneously 3. Plating solution analysis 4. Rapid, non-destructive gold karat assay 5. 3 instrument configurations to accommodate various sample sizes 6. Over 3000 cmi900 series instruments sold worldwide.

We are Offering Wire Rope and Steel Conveyor Belt Testers. Based on MFL technique INTROS are used for different applications such as the inspection of mine hoist ropes, aerial tramways ropeways, ski lifts, elevator ,steel conveyor belts ,storage tanks and crane ropes.

We are Offering White Light Lamps & Led Lamps.

We are offering weather station. Touch screen display solar powered outdoor sensors indoor/outdoor temperature & humidity wind speed and direction wind chill/dew point 12-24 hour weather forecast expandable: accepts up to 3 additional sensors long-range sensors transmit up to 328-feet from the main unit large lcd touch screen illuminated with higlo electro-luminescent backlight pc compatible (with optional rs-232 serial cable and software, not included) wall-mount or desktop display options ac adapter and backup batteries included for base unit (4 x aa) 4 x aaa batteries included for bthr indoor sensor solar powered remote sensors use 2 x aa batteries for backup (not included) sensors included: anemometer measures wind speed and direction self-emptying rain gauge measures rainfall indoor temperature humidity barometric pressure thgr968 measures outdoor temperature and humidity dimensions: 8.5l x 1.75d x 5.5h (in.)

The spectro voc monitor gas sensor module provides state of the art gas measurement in a flexible cost effective package. 2 each module is ready to use with multi-point calibration 3 outputs include analog voltage, relay and status indicators 4 with optional rs232, rs485 and led (blue) or lcd displays. 5 recommended applications include: 6 perchloroethylene monitoring for dry cleaning machines 7 hvac 8 ozone generator control 9 food and beverage 10 sanitation 11 refrigeration specification sensor type analytic gss technology gas sensitive technology sensor voc 0-500 ppm 0-5v out scale 0 – 500 ldl 1 ppm accuracy ± 10 ppm 0 - 200 ppm ± 10% 200 - 500 ppm resolution 1 ppm response time (t90) < 60 s sampling method fan operating temp -0°c to 40°c relative humidity 5 to 95% (non-condensing) operational mode continuous control or alarm warm up time 10 minutes (max. Accuracy) display 3.5 digit led relay set point user configurable digital output rs232 analog output 0 - 5 vdc (8 bit) relay output (no internal alarm) 24 v; 5a (max.) alarm option (no relay output) internal piezo 85 db @ 30cm power supply 12 vdc; 800 ma; plug - in ac power adaptor enclosure rating ip20 & nema 1 equivalent l x w x h 200 x 120 x 85 (mm) weight 700 gms approvals part 15 of fcc rules en 61000 -6-3: 2001.

We are recognized as the prime Manufacturer of supreme Vickers Hardness Testing Machine worldwide. These Hardness Testing Machines are vastly used in varied industries. Our quality tested Vickers Hardness Testing Machine is widely appreciated for its multiple characteristics. It is available at competitive prices in the market. Attributes : User friendlyAccurate resultsEasy to operateHighly durable

We are offering vibrating machine a specially designed vibrating machine is used for vibrating the mix in moulds according to strictly controlled programme at a frequency of 12,000 ± 400 cycles per minute. The vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The center of gravity of the vibrator, including the cube mould, is either at the center of eccentric shaft or within 25mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds. The machine is suitable for operation on 220v, 50hz, single phase, ac supply.

We are offering vertical load support, head expander, fixtures. vertical load support and head expanders are used to extend the mounting surface area of the shaker platform so that larger or multiple test objects can be tested at the same time, decreasing total test cycle time and cost. In addition, with guided head expanders & vertical load supports, payloads with large footprints can be safely mounted and tested on the shaker, minimizing the risk of damage to the shaker suspension system micron offers a wide range of vertical load supports, head expanders, special mounting fixtures (cube, l & t type) and plates to maximize the versatility of any electro dynamic shaker. Although many load bearing platform and fixtures are resonant below 1000 hz, average or external control techniques allows operation up to 2000 hz with ease.

135 UV Comes without any handle but with mounting brackets (stationary mounting) H135 UV Comes with a top Handle PH135 UV Comes with a Pistol handle

We are offering universal automatic compactor it is a motor driven mechanical compactor useful for soil compaction into 100 mm or 150 mm diameter moulds. Two sets of rammers are provided, one of 2.6 and arranged for 310 mm. Drop and other 4.9 kg and arranged for 450 mm fall. For comaction soil into 150 mm dia moulds, 100 mm face dia rammers having weight 2.6 kg and 489 kg are used. Where as for 100 mm dia moulds they are of 50 mm dia. The rammer assembly is provided with a ratched and pawl arrangement to lift it from the top of the soil layer. When the rammer reaches the required height the pawl release the rammer which falls freely on soil surface. The release mechanism is operated by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The base plate of the specimen mould is to be fitted to the rotating base plate of the instrument which makes 1/5th revolution per stroke. The equipment is suitable for operation on 230 volts, 50 cycles, single phase, a.c. Supply. Without moulds. Note : mould are to be ordered separately.

We are offering unconfined compression tester this is a hand operated instrument for determining the unconfined compression strength of soil specimens of diameter ranging from 38 mm to 100 mm. Load on the sample is applied gradually by a hand operated load frame and loads are measured on a sensitive proving ring attached to the load frame. Specifications: comprises of a hand operated load frame, cap. 5000 kgf with screw jack for loading, handle and strain dial gauge bracket, adaptor for proving ring, conical seats and male/female coning tools for 38 mm dia samples.supplied without proving ring, dial gauge.

We are Offering Ultrasonic Thickness Gauges. TG 210 & TC-410: General Purpose Ultrasonic Thickness Gauge.Features including SplitView, SplitScan and AutoTrack with simultaneous view of A Scan & B Scan.

TG 110 DL: General Purpose Fully Loaded Ultrasonic Thickness Gauge

At present the ultrasonic pulse velocity method is the only one of this type that shows potential for testing concrete strength in situ. It measures the time of travel of an ultrasonic pulse passing through the concrete. The fundamental design features of all commercially available units are very similar, consisting of a pulse generator and a pulse receiver. Pulses are generated by shock-exciting piezo-electric crystals, with similar crystals used in the receiver3. The time taken for the pulse to pass through the concrete is measured by electronic measuring circuits. Pulse velocity tests can be carried out on both laboratory-sized specimens and completed concrete structures, but some factors affect measurement: 1. There must be smooth contact with the surface under test; a coupling medium such as a thin film of oil is mandatory. 2. It is desirable for path-lengths to be at least 12 in. (30 cm) in order to avoid any errors introduced by heterogeneity. 3. It must be recognized that there is an increase in pulse velocity at below-freezing temperature owing to freezing of water; from 5 to 30°C (41 - 86°F) pulse velocities are not temperature dependent. 4. The presence of reinforcing steel in concrete has an appreciable effect on pulse velocity. It is therefore desirable and often mandatory to choose pulse paths that avoid the influence of reinforcing steel or to make corrections if steel is in the pulse path. Applications and Limitations. The pulse velocity method is an ideal tool for establishing whether concrete is uniform. It can be used on both existing structures and those under construction. Usually, if large differences in pulse velocity are found within a structure for no apparent reason, there is strong reason to presume that defective or deteriorated concrete is present.

We are Offering Ultrasonic Flaw Detectors. Nova 900 Series: Precision Ultrasonic Thickness Gauge

We are Offering Analog High Speed, High Resolution, CRT Based Ultrasonic Flaw Detector

We are offering tuft withdrawal tensometer tuft withdrawal tensometer determine the tuft retention force of the tuft carpet pile yarns. viewing size of the fabric yarn : 10 x specification: maximum capacity 10 kg (range 0 to 10 kg) accuracy 10gm manual operated

We are offering traverse thread counter slots in the slotted plate : 10, 12.7, 20, 25.4, 50mm viewing size of the fabric yarn : 10 x source of light : 11w, 220 v ac.

We are offering thermoelectric gaseous attachment. in high volume sampler / reparable dust sampler provision has been made for simultaneous sampling gaseous pollutants. Here the air is passed through suitable reagents that would absorb specific gases where gaseous pollutant like so2, nox, cl2, h2s, cs2, nh3 etc. Are analyzed subsequently by simple wet chemistry method to determine the concentration of specific pollutant. During gaseous sampling it often happens that ice does not last for full sampling period due to high ambient temperature. As a result temperature of chemical reagents increases and it reduces absorption efficiency of gaseous pollutant. During high temperature even chemical reagents taken for absorption evaporates with time. Thermoelectric attachment sle-tga 143 has been designed to take care of such problems. It is provided with non wearing thermoelectrics / peltier system special features 1 provides 24 hours continuous cooling. 2 non wearing thermoelectrics (peltier eystem). 3 full polyurethane-foam lining. 4 brings down temperature by 10-25 deg g depending upon the ambient conditions. 5 easy to use even with high volume sampler or respirable dust sampler. technical specification flow rate 0-3 lpm measured using plastic body flow meter accuracy 2% full scale division power consumption 48 watts sampling train four inlet and one outlet manifold with built in needle valves for flow control of each in let absorber 4 nos. Of 35 ml. Borosilicate glass impingers battery eliminator for providing 12 volt dc power.

We are offering tensile testing machine range: 500 kg with 0.1 kg least count digital display elongations: up to 900mm x 0.1 mm least count digital display speed: any two speed according to the material to be tested motor: ½ hp, 1425 rpm, 220 vac single phase induction motor power required: 220 vac, 500 w, single phase.

We are offering sulfur analyzer. Application it is applicable in the industry such as electrical power, coal, commerce inspection, environment protection, metallurgy, paper making, petrochemical, earth probe, and the research institution or quality inspecting organization to measure the sulfur content in the materials of coal, cinder, coke, catalyst, minerals, rock, and petrochemicals. specifications model : sle-dl furnace temperature : 1150 °c (coal), 900 °c (oil) temperature controlling precision : ± 5 ° c sulfur testing resolution : 0.001 % sulfur testing range : > 0.01 % testing time : 5 min per sample sample number : 24 sample weight : 45mg~100mg power supply : 100 ~260v, 50/60hz power : ≤4kw dimension : 620mm× 500mm× 370 mm weight : 58kg features 1. Adopting the integrated configuration, put the sample feeding device, electrical scale, vertical high temperature cracking furnace, electrolytic cell, stirrer, and gas purification system in a single container. Thus to make the instrument concise and graceful. 2. Testing time, normally about 5 minutes, can be automatically judged according to the different samples. System errors can be automatically corrected by software and the testing results is more accurate than gb (national standard). Testing with the principle of coulometry, the testing time is shorter than escar method and high temperature burn moderate method. 3. Using the pid temperature controlling algorithm, hence the temperature control is more accurate and the temperature rise more quickly. Using contact less switches. Have over temperature protection and electrolyte anti-backflow facility, thus to make the system safe and reliable. 4. Adopting the multi-spots dynamic coefficient correcting method, the system error can be automatically corrected by software, hence to make the testing result more accurate. 5. Temperature control, sample feeding, electrolyzing, and calculation are done by the procedure. System automatically store testing results and print out. Using the dynamic windows operating interface, the operation is simple and easy. 6. Adopting the advanced pci technology, one computer can control several instruments. And the synthesized instrument can be composed combined with other instruments. 7. Completely support windows systems; high stability; can link electronic scale and share data in long distance through network.

We are offering image analysis software. This image analysis software can be used in the field of pathology, histo-pathology, botany, zoology, microbiology, fnac reporting, hematology, anatomy etc. This package is highly useful where ever there is a usage of medical microscope (in laboratories, clinics and hospitals, for pathologists). This informative bundle is also interactive to report the findings to patient's consulting physician, along with his comments. measurement tools calibration length curved length angle area radius perimeter counting segmentation particle measurement density